• 태양에너지
• /
• 제9권3호
• /
• pp.73-80
• /
• 1989

This paper presents as assessment based on steady-state thermodynamic analysis and computer modeling of a double effect generation absorption heating cycle for solar air-conditioning to find operating temperature ranges. The influences of component temperatures on the heating coefficients of performance and mass flow ratio have been investigated to obtain optimum operating conditions for the proposed air conditioning system. And the single and double effect absorption cycles are compared with each other over the same range of temperatures.

• 태양에너지
• /
• 제18권4호
• /
• pp.23-32
• /
• 1998

Fuel cells supply electric power and heat at work, and their exhaust gas is comparatively clear. So they are in the limelight as one of the co-generation systems which behave friendly with the environment. Fuel cells discharge both steam and hot water. Accordingly, if we combine absorption heat pump driven by waste heat with fuel cells, we can construct an advanced energy conserving system. The purpose of this study is the objective for evaluating the possibilities of effectively utilizing waste heat of fuel cells as a heat source for the single and double effect absorption systems. Simulation studies on single and double effect absorption have been performed for water/lithium-bromide pair. The effectiveness of introducing a waste heat source of fuel cells is demonstrated. The result of this study showed that total efficiency was about 85% at rated operation and about 75% at 75% load operation. Absorption cycle moved to more strong concentration when fuel cell operated at 75% load.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.539-545
• /
• 2004

In this study, the effect of washing, bleaching, and abrasion on tactile and the water absorption properties of the split-type Nylon/Polyester (N/P) microfiber pile-knit was investigated under various enduse conditions. We examined the water absorption and surface properties of PET microfiber which will be very useful in the future. We also studied the variations of their performance during usage caused by friction and repeated washing, regard to all kinds of physical, chemical changes which will appear while using those textiles. Progress in further splitting of PET microfiber fabric is observed with increases in the number of washing and bleaching cycles, and treatment temperature. Initial water absorption (%) was increased with progress in splitting, which provided efficient capillary channel. Surface properties were varied with additional splitting by washing and abrasion. Formation of pilling and splitting by abrasion increase surface roughness, diminishing tactile property, and reduced water absorption property. The current results from this study is expected to provide the appropriate washing management guide to consumers, and to inform end-use performance of product to a producer for improving product quality.

• 한국축산식품학회지
• /
• 제40권6호
• /
• pp.969-979
• /
• 2020

Fresh grass carp was used to produce surimi and 50 g/kg, 100 g/kg, or 150 g/kg pork back fat was added. The water distribution, thiobarbituric acid reactive substances (TBARS), myoglobin oxidation, color parameter (L*, a*, and b*), heme and non-heme iron content of samples were determined to analyze the effects of different fat content on the oxidation of myoglobin and lipids during multiple freeze-thaw cycles of grass carp surimi. Both multiple freeze-thaw cycles and increased fat content lead to an increase in TBARS, a blue shift in the absorption peak of myoglobin porphyrin, a decrease in heme iron content, and an increase of non-heme iron content. Repeated freeze-thaw caused a decrease in immobilised water content and L*, and caused an increase in a* and b*. Increased fat content caused an increase in immobilised water content, L* and a*, and caused a decrease in b*.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.9-22
• /
• 2020

The present work looks at the possibilities of recycling more than once demolished concrete as coarse aggregates, to produce new concrete. Different concrete mixes were made with substitutions of 50%, 75% and 100% of recycled concrete aggregates respectively as coarse aggregates. The physico-mechanical characterization tests carried out on the recycled concrete aggregates revealed that they are suitable for use in obtaining a structural concrete. The resulting concrete materials had rheological parameters, compressive strengths and tensile strengths very slightly lower than those of the original concrete even when 100% of two cycles recycled concrete aggregates were used. The durability of the recycled aggregates concrete was assessed through water permeability, water absorption and chemical attacks. The obtained concretes were thought fit for use as structural materials. A linear regression was developed between the strength of the material and the number of cycles of concrete recycling to anticipate the strength of the recycled aggregates concrete. From the results, it appear clear that recycling demolished concrete represents a valuable resource for aggregates supply to the concrete industry and a the same time plays a key role in meeting the challenge for a sustainable development.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.120-123
• /
• 2008

Refrigeration plants using absorption principles have been around for many years with initial development taking place over 100 years ago. Although the majority of absorption cycles are based on water-LiBr cycle, many applications exist where ammonia-water can be used, especially where lower temperatures are desirable. In both systems water is used as working fluid, but in quite different ways: as a solvent for the ammonia system, and as refrigerant for the lithium bromide system. This explains that the lithium bromide absorption system is strictly limited to evaporation temperatures above $0^{\circ}C$. The main industrial applications for refrigeration are in the temperature range below $0^{\circ}C$, the field for the binary system ammonia-water.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.198-202
• /
• 2008

Refrigeration plants using absorption principles have been around for many years with initial development taking place over 100 years ago. Although the majority of absorption cycles are based on water-LiBr cycle, many applications exist where ammonia-water can be used, especially where lower temperatures are desirable. In both systems water is used as working fluid, but in quite different ways: as a solvent for the ammonia system, and as refrigerant for the lithium bromide system. This explains that the lithium bromide absorption system is strictly limited to evaporation temperatures above $0^{\circ}C$. The main industrial applications for refrigeration are in the temperature range below $0^{\circ}C$, the field for the binary system ammonia-water.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.193-198
• /
• 1999

Maxwell displacement current(MDC) measuring technique has been applied on the study of monolayers of fatty acid. The displacement current was generated from monolayers on the water surface by monolayer compression and expansion. Displacement current was generated when the area per molecule was about $130{\AA}^2$. MDCs were investigated in connection with monolayer compression cycles. It was found that the current pulses were generated over the entire range of molecular area, and the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. We investigated the change in absorption spectra of the fatty acid(8A5H) monolayer LB film due to cis-trans photoisomerization. It was found that the absorption spectrum of the 8A5H LB film was induce to photoisomerization by alternate irradiation with UV and visible light irradiation.

• 지질공학
• /
• 제14권4호
• /
• pp.401-416
• /
• 2004

이 연구에서는 물과 산성용액을 이용한 동결${\cdot}$융해실험을 통하여 강원도 횡성군에서 채취된 셰일의 물리적 특성변화를 측정하였다. 실험에 적용된 동결${\cdot}$융해 온도 범위는 $-20{\pm}2^{\circ}C\~15{\pm}2^{\circ}C$ 이고 시료는 12시간 동안 동결한 후 물속에서 8시간 동안 융해시켰다. 이 후 시료를 진공 챔버에서 4시간동안 수침하여 완전히 포화시켰으며, 이러한 일련의 과정을 1 cycle로 설정하였다. 본 연구에서는 매 5 cycle마다 시료의 흡수율, 탄성파 속도, 쇼어 경도, 슬래이크 내구성시험, 일축압축시험 등을 실시하였다. 동결${\cdot}$융해 실험의 반복횟수가 증가될수록 시료의 물성은 변화하였다. 일축압축강도는 물을 이용한 실험에서는 매cycle마다 0.40MPa정도 감소하였고 산성용액을 이용한 실험에서는 0.48Mra정도 감소하였으며, 탄성계수 역시 물에서 0.21Gpa, 산성용액에서 0.30GPa 감소하였다. 흡수율의 경우는 물에서 $0.29\%$, 산성용액에서 $0.37\%$ 증가되었다. 이러한 결과는 산성용액에서의 풍화속도가 물에서의 풍화속도보다 빠름을 지시한다. 그러나 탄성파속도, 쇼어경도와 슬레이크 내구성 시험에서는 물과 산성용액에 따른 차이가 거의 나타나지 않았다. 동결${\cdot}$융해 실험 결과와 연구지 역의 동절기 기간의 기온분포를 고려해 볼 때 실제 1년이 동결-응해 실험 약 $6\~12\;cycle$에 해당될 것으로 추정된다.

• 설비공학논문집
• /
• 제10권1호
• /
• pp.79-87
• /
• 1998

Basic design of a 50USRT(175㎾) triple effect absorption chiller driven by hot gas has been carried out for both parallel and series flow cycles. Parallel flow cycle showed higher COP, however, the temperature in the generator was also higher than that in series flow cycle. Dynamic operation behavior of a parallel flow system at off-design conditions, such as the change in heat transfer medium temperature or the construction change of the system components, has been investigated in detail. It was found that the cooling capacity was seriously decreased by reducing hot gas flow rate and UA-value in the high temperature generator. However, the system COP was improved, because thermal load in the system components was reduced. The COP and the cooling capacity was found to be improved as cooling water temperature decreased or chilled water temperature increased. The optimum ratio of solution distribution could be suggested by considering the COP, the cooling capacity and the highest temperature in the system, which is critical for corrosion.