• Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2005

Hexavalent chromium in aqueous solutions was successfully removed via sorption and reduction in the presence of waste leaves. Cr(VI) removal followed a first-order reaction, and removal rates were proportional to the amount of waste leaves used in the tests. Most of Cr(VI) were removed via sorption in early stages of the tests, but the reduction reaction played a significant role in Cr(VI) removal later. Solution pHs were continuously decreased due to the microbial activity, which was induced from the microorganisms attached on waste leaves. The decreased solution pHs further enhanced the sorption and reduction of Cr(VI). To characterize the microorganisms found in the tests, a denaturing gradient gel electrophoresis (DGGE) method was used. The majority of microorganisms were composed of Bacillus sp. which can reduce Cr(VI). Thus, waste leaves can be effective reactive media for the treatment of Cr(VI) in the subsurface.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.504-505
• /
• 2009

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.606-614
• /
• 2017

Amount of food waste has been increased annually in Korea and re-use of food waste as a fertilizer or soil amendment in agricultural field has been studied. Therefore, main purpose of this research was to determine optimum condition of hydrolysis for food waste management. Three different solvents, HCl, $H_2SO_4$, and KOH, were used and varied concentration at the range of 10~30% and hydrolysis time at the range of 1~3 hours were evaluated. In general, reduction rate of food waste was increased when concentration of solvent and hydrolysis time was increased except when KOH was used. Among different solvents, concentration, and hydrolysis time, the highest reduction rate (97.79%) was observed when 30% of HCl was used with temperature of $140^{\circ}C$ at 2 hours of hydrolysis time. In addition, neutralization effect of alkalic materials, shell waste (SW) and egg shell (ES) was evaluated. Both SW and ES increased pH of finished acid hydrolysis solution up to 7.61 indicating that neutralization effect of SW and ES was sufficient for finished acid hydrolysis solution. Contents of organic matter was also at the range of 10.7~13.04% and 5.53~8.04% respectively when HCl and $H_2SO_4$ were used as solvent. Overall, hydrolysis technique can be used to manage food waste with selected optimum condition in this study and characteristics of finished hydrolysis solution after neutralization might be suitable for soil amendments.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.161-170
• /
• 2006

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered on the inner surface of hot cell and surface of equipment in hot cell. It was necessary to develop a filtration equipment to reuse the PFC waste solution generated on PFC decontamination due to the high cost of PFC solution and for minimization of the volume of second waste solution. The filtration equipment was developed to remove hot particulate in PFC waste solution. It was made suitable size and weight in consideration of hot cell gate and crane. And it has wheels for easy movement. Flux of the filtration equipment decreased with particulate concentration increase. It consists of pre-filter($1.4{\mu}m$) and final-filter($0.2{\mu}m$) for protection of the flux decrease along filtration time. It treatment capacity of waste solution is 0.2 L/min.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.303-308
• /
• 2017

The $FeCl_3$ waste solution used to etch various metals contains valuable metal such as nickel. In this study, we recovered as high purity nickel carbonate crystalline powders from nickel-containing etching waste solution after regeneration of iron chloride. Firstly we eliminated about of the iron impurities under the condition of pH 4 using 5 % NaOH aqueous solution and then removed the remaining impurities such as Ca, Mn and Zn etc. by using solvent extractant D2EHPA (Di-(2-ethylhexyl) phosphoric acid). Thereafter, nickel carbonate powder having a purity of 99.9 % or more was obtained through reaction with sodium carbonate in a nickel chloride solution.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.33-38
• /
• 2005

The distribution of vanadium and iron ionic species in the presence of picolinate ligand has been simulated at various conditions with different pH values and compositions in the decontamination waste solution. In spite of variations of metal concentration in the decontamination solution, the shape of distribution diagrams were not changed greatly at both high (the molar ratio of picolinate to vanadium is 6) and low (the molar ratio is 3) LOMI decontamination conditions. However, in the solution of low-picolinate condition the shape of the distribution diagram of iron(II)-picolinate complexes was changed significantly. This phenomenon is attributed to the shortage of relative amount of picolinate ligand to iron existed in the solution, and originated from the difference in stability constants for complexes formed between vanadium(III) and iron(II) species with picolinate ligand. The distribution diagrams obtained in this study can be applied very usefully to the prediction or understanding the reaction phenomena occurred at various conditions in the course of the LOMI waste treatments such as an ion exchange operation.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.132-138
• /
• 2005

Objective of this research was to evaluate the fate of nitrogen and phosphorous in hydroponic waste solution from the plastic film house cultivation applied to the upland soil by column leaching and field experiment. The pH and EC of leachate were decreased by the reaction with the upland soil in the column leaching experiment. The EC and concentrations of $H^+,\;K^+,\;and\;{NH_4}^+$ of leachate were decreased as the column length (soil depth) was increased. But these were increased as the amounts of the hydroponic waste solution were increased field experiment growing red pepper (Capsicum annum L.) to monitor the nutrients movement using ion exchange resin capsule demonstrated that the nutrient concentration of soil solution was increased in the orders of $PO_4-P. Nitrate concentration of resin capsule inserted into the soil was relatively higher than other nutrients $(NH_4-N\;and\;PO_4-P)$ at the 45 cm of soil depth. The overall results demonstrated that the hydroponic waste solution could be recycled as plant nutrients to enhance fertility of soils. But nitrate leaching was a major factor for safe use of the hydroponic waste solution in soil.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.73-77
• /
• 2003

In order to predict the dynamic behaviors of uranium and cobalt in a fixed bed at various influent pH values of liquid waste, the adsorption system was regarded as multi-component adsorption between each ionic species in a solution. Langmuir isotherm parameters of each species were extracted by incorporating equilibrium data with the solution chemistry of uranium and cobalt using IAST. Prediction results were in good agreement with the experimental data, except for a high concentration and pH. Although there was some limitations in predicting the cobalt adsorption, this method may be useful in analyzing a complex adsorption system where various kinds of ionic species exist in a solution.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.165-170
• /
• 2001

The main purpose of this study is to generate a fine copper oxide powder of high purity, with a compact structure and a uniform particle size by a spray pyrolysis process. The raw material is a waste copper chloride solution formed in the manufacturing process of Print Circuit Board (PCB). This study also examines the influences of various factors on the properties of the generated powder. These factors include the reaction temperature, the inflow speed of the raw material solution, the inflow speed of the air, the size of the nozzle tip, and the concentration of the raw material solution. It is discovered that, as the reaction temperature increases from 80$0^{\circ}C$ to 100$0^{\circ}C$ , the particle size of the generated powder increases accordingly, and that the structure of the powder becomes much more compact. When the reaction temperature is 100$0^{\circ}C$, the particle size of the generated powder increases as the concentration of copper in the raw material solution increases to 40g/l, decreases as the concentration increases up to 120g/l, and increases again as the concentration reaches 200g/1. In the case of a lower concentration of the raw material solution, the generated powder appears largely in the form of CuO. As the concentration increases, however, the powder appears largely in the form of CuCl. When the concentration of copper in the raw material solution is 120g/1, the particle size of the generated powder increases as the inflow speed of the raw material solution increases. When the concentration of copper in the raw material solution is 120g/1, there is no evident change in the particle size of the generated powder as the size of the nozzle tip and the air pressure increases. When the concentration is 40g/1, however, the particle size keeps increasing until the air pressure increases to 0.5kg/$\textrm{cm}^2$, but decreases remarkably as the air pressure exceeds 0.5kg/$\textrm{cm}^2$.