• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.253-259
• /
• 2005

Mine is quickly decline, Nowadays, many of abandoned and closed mines. AMD is abandoned surface water by accumulated yellowboy and caused environmental pollution by amount of heavy metals. The aim of this study waste lime was mixed with the sediment to produce an aggregate far the purpose of neutralizing the acidity and stabilization the heavy metal in the aggregate structure .to pozzolan effect. The result of Waste lime and sediment mixed(5%, 10%, 20%)ration by curing days(3, 7, 38days), After 28 curing days as 5% mixed waste lime leaching solution concentration of all heavy metals is satisfied with regulation limit. Also, the result of fractionate heavy metals to stabilization as 28 curing days very decrease exchangeable and reducible type, and then increase carbonate type. With the above results, waste lime the most effective for the sediment treatment and useful for the recycling waste resource.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.80-83
• /
• 2001

According to the EPA in Taiwan report, 9.05 million metric tons of solid wastes were generated in 1999, and the waste glass was accounted of 4.95 percent. However, with the increasing tonnage of disposal cost and existing disposal sites are reaching full capacity, recycling is currently accepted as a sustainable approach to waste management. Therefore, it's essential and urgent that the government in Taiwan establish the recycling and recovery framework for the minimization of the solid waste, reduction of materials and energy consumption, and the encouragement for the reuse, recycle and recovery development. To achieve this Boal, Taiwan has been strived for a long period of time in waste glass recovery and recycle. Waste glass, unlike other kinds of resource waste, is 100% recyclable. The EPA in Taiwan now center on a lot of different kinds of waste glass, such as glass container, flat glass, CRT glass, windshields glass, fluorescent lamps, and waste pesticide glass container. This article will focus on the framework of the recycling market access, and also try to provide some strategies to improve waste glass recycling efficiently.

• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.17-33
• /
• 1987

As a result of technical advances and industrialization, the characteristics of domestic and industrial wastes are becoming more complex. Accordingly, improved treatment and disposal systems are being continuously sought to take account of complex characteristics and to comply with economic restrictions. In this study, an application of pyrolysis to the treatment of industrial wastes, including waste scrap rubber, waste raw material used in making the slipper bottom and waste PVC pipe, and the effectiveness of pyrolysis in resource recovery from these wastes were investigated. Batches of wastes were pyrolysed by external heating to a temperature of 400-800$\circ$C in a 32 mm diameter x 0.9 m long silica tube to produce combustible gases, oils and chars. Before the start of pyrolysis runs, the entire system was purged with nitrogen gas to exclude the air. The temperature inside the retort was controlled by the thermocouple in the gas stream, and referred to as the pyrolysis temperature. Under these conditions three products were separately collected and further analyzed. The results were summarized as follows. 1. More gases and less chars were produced with higher pyrolyzing temperature and with higher rates of heating, but the yields of oils tended downwards at temperatures above 700$\circ$C. Accordingly, operating conditions of pyrolysis should be varied with desired material. 2. Calorific values and sulfur contents of produced oils were sufficient and suitable for fuel use. Chars from waste rubber had high heating values with low sulfur contents, but calorific values of chars from waste PVC and waste slipper were as low as 3, 065-4, 273 kcal/kg and 942-2, 545 kcal/kg, respectively. Therefore, char from these wastes are inappropriate for fuel. 3. Soluble contents of Pb, Cd, Cu and Zn in chars from waste rubber and waste slipper were below the Specific Hazardous Waste Treatment Standards. However soluble contents of Pb and Cd in chars from waste PVC were one or two times and five or seven times exceedingly the Specific Hazardous Waste Treatment Standards, respectively. 4. Post high heating is desirable for treatment method of waste PVC which generates toxic hydrogen chloride. 5. The proportions of hydrogen, methane and ethane in produced gases were in the range of 3.99-35.61% V/V, 18.22-32.50% V/V and 5.17-5.87% V/V, respectively. 6. Pyrolysis is a useful disposal method in case of waste slipper, which was hardly combustible, and thus investigations of this kind of materials are required for effective management of industrial waste. 7. Based upon the possible market development for products, overall pyroly economics to take account of treatment values of noncombustible or hazardous materials should be evaluated.

• 한국환경과학회지
• /
• 제32권12호
• /
• pp.965-972
• /
• 2023

As the world population growth and economy develops, the importance of eco-friendly organic waste resource treatment and up-cycling increases. Black soldier fly (BSF) (Hermetia illucens) treats organic waste resources that allows it to be recycled as a feed resource. In this study, we analyzed the nutrients composition, amino acid, and fatty acids of BSF larvae fed three agricultural by-products, namely apple pomace, mandarin waste, and oriental melon waste (mainly generated in South Korea). The highest BSF larvae crude protein and amino acid content was obtained in those fed mandarin waste compared with the other two diets (apple pomace and oriental melon waste). BSF larvae fed apple pomace had the highest crude fat, fatty acid, and lauric acid content compared with the other BSF larvae. Furthermore, all crude protein and fat content of BSF larvae fed the three agricultural by-products exceed that of the original agricultural by-products.

• 국제초고층학회논문집
• /
• 제7권2호
• /
• pp.161-170
• /
• 2018

Rapid urbanization, resource depletion, and limited land are further increasing the need for skyscrapers in city centers; therefore, it is imperative to enhance tall building performance efficiency and energy-generative capability. Potential performance improvements can be explored using parametric multi-objective optimization, aided by evaluation tools, such as computational fluid dynamics and energy analysis software, to visualize and explore skyscrapers' multi-resource, multi-system generative potential. An optimization-centered, software-based design platform can potentially enable the simultaneous exploration of multiple strategies for the decreased consumption and large-scale production of multiple resources. Resource Generative Skyscrapers (RGS) are proposed as a possible solution to further explore and optimize the generative potentials of skyscrapers. RGS can be optimized with waste-energy-harvesting capabilities by capitalizing on passive features of integrated renewable systems. This paper describes various resource-generation technologies suitable for a synergetic integration within the RGS typology, and the software tools that can facilitate exploration of their optimal use.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권4호
• /
• pp.504-510
• /
• 2004

Two experiments were conducted. In expt. 1, a total of fifty-four pigs (L$\times$Y$\times$D, 56.14$\pm$1.7 kg) were used for a feeding trial to determine the effect of wet feeding of a commercial-type diet without food waste (FW). Treatments were dry (Control), wet (WF) and wet+dry feeding (WDF). For wet feeding, the diet was mixed with water at a ratio of 1:2.5 (feed:water). A wet feed was given during the whole experimental period for the WF group, but the dry feed was given during the finisher period for the WDF group. In expt. 2, a total of fifty-four pigs(L$\times$Y$\times$D, 55.7$\pm$1.8 kg) were used for a feeding trial to determine the effect of wet feeding of FW. Treatments were a commercial-type dry (Control), wet fermented food waste (WFFW) and WFFW+dry feeding (WFFW+DF). For wet feeding of fermented food waste, however, some ingredients (concentrate) were added to make nutrient contents comparable to the control diet. The FW collected was ground ($\leq$5 mm), heated with a steam jacket (140$\pm$3$^{\circ}C$) and fermented with probiotics for one day in a steel container at 30-40$^{\circ}C$. For the WFFW group, the wet feed was given during the whole experimental period, but a dry feed was given during finisher period for the WFFW+DF group. In expt. 1, during the grower period, pigs fed wet feed showed higher average daily gain (ADG) and feed conversion ratio (FCR) than those fed only dry feed (p<0.05). During the finisher period, pigs in the WDF group showed better ADG and FCR than the control group. During the entire experimental period, pigs in the WDF group grew faster (p<0.05) than those in the control group, and the same trend was found in FCR. Also, dressing percentage, backfat thickness, lean %, and pork color were not affected by the wet feeding of diets in this study. In expt. 2, during the grower period, pigs fed diets containing FW showed lower (p<0.05) ADG than those fed the control diet. But FCR was better (p<0.05) in pigs fed FW than in the control group. During the finisher period, pigs in the WFFW+DF group grew faster (p<0.05) than those in the control and WFFW groups. During the entire experimental period, pigs fed the control diet showed better ADG (p<0.05) than those fed FW, but feed intake and FCR were vice versa. Dressing percentage was lower (p<0.05) in the WFFW than in the control group, but backfat was thinner in the WFFW group than in the control group. In summary, it can be concluded that wet feeding of formula feed can improve daily gain, however, feeding fermented wet food waste may reduce daily gain of finishing pigs, even though it was fermented and the nutrient was fortified with concentrates. In addition, dry feeding of a formula feed during the finishing period can improve daily gain in pigs fed a wet feed with or without food waste during the grower period.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• 유기물자원화
• /
• 제20권2호
• /
• pp.76-88
• /
• 2012

본 연구는 생활계폐기물 중 별도로 분리 배출되어 재활용 선별장으로 반입된 재활용 폐기물에 대한 수집운반에서부터 최종처리까지의 흐름을 분석하였다. 연구는 실제 현장조사를 기본으로 실시하였으며, 조사 결과, 최종 재활용 측면에서는 대체적으로는 적정 처리가 이루어지는 것으로 파악 되었으나, 불필요한 이동 및 중간처리 경로를 통해 처리되는 품목이 상당수 있는 것으로 조사되었다. 지자체에서 선별된 폐자원을 처리 또는 수집운반 하는 업체들은 오로지 경제성 원리에 입각한 폐기물 처리비와 운반비 차익을 주요 수익원으로 하기 때문에 불필요한 중간단계 및 장거리 폐기물 이동현상이 나타나게 된다. 따라서 합리적인 자원순환망 구축을 위한 첫 번째 단계는 폐기물 발생원의 근거리에 있는 재활용업체에서의 우선처리원칙이 필요하며, 필요에 따라 인근 지역의 폐기물을 동시에 처리 할 수 있는 광역처리체계 도입이 타당하다.

• 유기물자원화
• /
• 제26권1호
• /
• pp.5-12
• /
• 2018

최근 지자체에서는 매립지 사용에 관한 갈등과 사용종료 시점을 앞두고 논란이 이는 사례가 늘고 있으며, 대체 매립지 마련이나 기존 매립지의 수명연장 합의를 이끄는데 난항을 겪고 있다. 이에 본 연구는 매립지 정비를 통하여 기 매립된 폐기물과 향후 매립될 폐기물의 순환이용 가능량을 산정하고, 매립지의 용량을 확보하도록 기여하는 데에 그 목적이 있다. 이를 위해 부피증가율, 중량비, 겉보기밀도를 주요 파라미터로 결정하고, 기존 사업 사례를 통해 그 값을 산정하였다. 기존 사업 지역(아산시, 예천군, 안동시)에서의 부피증가율의 평균값은 1.42로 산정되었다. 중량비의 경우 세 지역의 토사류 평균값은 45.6%로 산정되었고, 가연성 폐기물과 불연성 폐기물의 비율은 "전국 폐기물 발생 및 처리 현황" 통계자료를 활용할 수 있도록 산정 방법론을 제시하였다. 겉보기밀도는 두 지역 평균값을 이용하였으며 가연성, 불연성, 토사류별로 각각 0.35톤/$m^3$, 1.40톤/$m^3$, 1.58톤/$m^3$으로 산정되었다. 본 연구에서 산정된 주요 파라미터들과 제시된 방법론을 통해 사례 연구로 청주매립지의 순환이용 가능량을 분석하였다. 기 매립된 폐기물을 정비하여 순환이용함으로써 새로 확보될 매립용량은 기존 매립지 용량 대비 45%에 해당되었다. 또한 매년 반입되는 물량을 선별하여 가연성분은 에너지화하고, 소각재, 불연성 및 토사류만 재매립할 경우 청주시의 매립지 사용연한이 20년 증가되는 것으로 분석되었다. 향후 본 연구에서 구축한 방법론은 특정 매립지를 선정하여 순환이용 하고자 할 때 기초자료로 활용될 수 있을 것으로 기대된다.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.343-348
• /
• 2011

Since 2005, food waste has been separately collected and recycled to animal feed or aerobic compost in South Korea. However, the conventional recycling methods discharge process wastewater, which contain pollutant equivalent to more than 50% of food waste. Therefore, anaerobic digestion is considered as an alternative recycling method of food waste to reduce pollutant and recover renewable energy. Recent studies showed that hydrogen can be produced at acidogenic stage in two-stage anaerobic digestion. In this study, the authors investigated the effects of pretreatment time and pH low set value on continuous mesophilic hydrogen fermentation of food waste. Food waste was successfully converted to $H_2$ when heat-treated at $70^{\circ}C$ for 60 min, which was milder than previous studies using pH 12 for 1 day or $90^{\circ}C$. Organic acid production dropped operational pH below 5.0 and caused a metabolic shift from $H_2/butyrate$ fermentation to lactate fermentation. Therefore, alkaline addition for operational pH at or over 5.0 was necessary. At pH 5.3, the result showed that the maximum hydrogen productivity and yield of 1.32 $m^3/m^3$.d and 0.71 mol/mol $carbohydrate_{added}$. Hydrogen production from food waste would be an effective technology for resource recovery as well as waste treatment.