• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.618-629
• /
• 2019

Along with growing population and economic development, increasing waste generation rates in developing countries have become a major issue related to the negative impacts of waste management on the environment. Currently, the business-as-usual waste management practices in Myanmar are largely affecting the environment and public health. Therefore, this study developed an alternative approach to waste management for reducing the environmental impacts in Myanmar by highlighting the greenhouse gas (GHG) emissions from business-as-usual practices and three proposed scenarios during 2018-2025. The calculation methods of the Intergovernmental Panel on Climate Change and Institute for Global Environmental Strategies were used for estimating the GHG emissions from waste management. It was estimated that the current waste management sector generated approximately 2,000 gigagrams of CO₂-eq per year in 2018, trending around 3,350 Gg of CO₂-eq per year in 2025. It was also observed that out of the proposed scenarios, Scenario-2 significantly minimized the environmental impacts, with the lowest GHG emissions and highest waste resource recovery. Moreover, the GHG emissions from business-as-usual practices could be reduced by 50% by this scenario during 2018-2025. The target of the similar scenario could be achieved if the local government could efficiently implement waste management in the future.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1010-1018
• /
• 2017

The European Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project sought to develop best practices in the retrieval, treatment, and disposal of irradiated graphite including other irradiated carbonaceous waste such as structural material made of graphite, nongraphitized carbon bricks, and fuel coatings. Emphasis was given on legacy irradiated graphite, as this represents a significant inventory in respective national waste management programs. This paper provides an overview of the characteristics of graphite irradiated during its use, primarily as a moderator material, within nuclear reactors. It describes the potential techniques applicable to the retrieval, treatment, recycling/reuse, and disposal of these graphite wastes. Considering the lifecycle of nuclear graphite, from manufacture to final disposal, a number of waste management options have been developed. These options consider the techniques and technologies required to address each stage of the lifecycle, such as segregation, treatment, recycle, and ultimate disposal in a radioactive waste repository, providing a toolbox to aid operators and regulators to determine the most appropriate management strategy. It is noted that national waste management programs currently have, or are in the process of developing, respective approaches to irradiated graphite management. The output of the Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste project is intended to aid these considerations, rather than dictate them.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.231-236
• /
• 2017

Solid waste disposal and management is a critical problem in Nigeria. Annually, a huge quantity of municipal solid waste is generated in Aba. Municipal solid waste disposal in Aba poses severe challenge to environmental safety, public health and welfare of citizens. The situation is made worse by the indiscriminate dumping of refuse at roadsides, streets, waterways and empty lands. The impact of this waste management practice in Aba is environmental deterioration. Efforts to improve waste management in Aba have not recorded significant success. This paper therefore aims to highlight the challenges facing the waste management sector in Aba and proffer solutions on how to improve the sector.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.220-237
• /
• 2019

Solid waste management (SWM) is one of the poorly rendered services in developing countries - limited resources, increasing population, rapid urbanization and application of outdated systems leads to inefficiency. Lack of proper planning and inadequate data regarding solid waste generation and collection compound the SWM problem. Decision makers need to formulate solutions that consider multiple goals and strategies. Given the large number of available options for SWM and the inter-relationships among these options, identifying SWM strategies that satisfy economic or environmental objectives is a complex task. The paper develops a mathematical model for a municipal Integrated SWM system, taking into account waste generation rates, composition, transportation modes, processing techniques, revenues from waste processing, simulating waste management as closely as possible. The constraints include those linking waste flows and mass balance, processing plants capacity, landfill capacity, transport vehicle capacity and number of trips. The linear programming model integrating different functional elements was solved by LINGO optimization software and various possible waste management options were considered during analysis. The model thus serves as decision support tool to evaluate various waste management alternatives and obtain the least-cost combination of technologies for handling, treatment and disposal of solid waste.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.323-329
• /
• 2018

The municipal solid waste (MSW) management system in one of the Class II Indian cities i.e. Rishikesh was studied and analysed to identify the key issues in solid waste management in the city. A total of 329 solid waste samples from 47 households were collected to characterize the household solid waste (HSW). The average (HSW) generation rate was 0.26 kg/c/d and it was composed of organic waste (57.3%), plastics (14%), paper (10.9%), and glass and ceramic (1.3%) and other materials (16.5%). There was an inverse relationship between household waste generation rate and family size (p < 0.05). The MSW management system practiced in Rishikesh is unsound. There is no waste segregation at source, no provisions of composting and no recycling by formal sector. The collection and transportation of waste is inadequate and inappropriate. Collected waste is dumped in open dumping site without scientific management. Following are some recommendations for developing a sustainable solid waste management system in Rishikesh city: (1) sensitize people for segregation at source; (2) promote reduction, reuse and recycling of wastes; (3) promote community based composting; (4) provision for 100% door to door collection and; (5) formalize the informal sectors such as rag pickers and recycling industries.

• Tribology and Lubricants
• /
• 제19권2호
• /
• pp.94-101
• /
• 2003

Used motor oil contains pollutants, including organic chemicals and meta]s. When disposed of improperly - in the trash, on the ground or in a sewer system - the pollutants may reach rivers, lakes or the ground water. Thus, all the waste oil products such as waste motor oil, waste oil container, and waste oil filter should be collected and transported for recycling or disposal by waste oil regulations. Because waste oil container is a valuable resource, waste oil containers can be reused, cleaned, buried, and burned for recycling processes. This paper presents the integrated management system that may increase the efficiency and productivity for collecting and reprocessing waste oil containers such as steel can and plastic container. The integrated management system consists of collection and transportation process management system and confirmation and certification process management system for waste oil containers.

• 환경영향평가
• /
• 제8권1호
• /
• pp.17-27
• /
• 1999

Applicability of LCA in establishing the integrated solid waste management were examined. Data were collected from current waste management system. LCA method was then applied to find environmentally sustainable waste management. The process comprises five steps : (1) collecting data, comparing the data with comprehensive urban planning as well, (2) analyzing the current waste treatment procedure leading to the database establishment, (3) LCA for the waste management system, (4) finding alternative scenarios based on the former steps, (5) establishing the optimum method in Ecopolis, best fitted to the local situation. The results and suggestions in this study are expected to yield comprehensive analysis as to current practices in waste management. More importantly it will be a valuable data in minimizing environmental burdens in connecting with living environments of Ecopolis. Information regarding the urban system and total environmental quality are expected from this study.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.709-720
• /
• 2018

Since the import ban of plastic waste in China has been enforced, plastic wastes were not properly collected and recycled in Korea. Hence, the management strategies for plastic waste in Korea should be improved by examining the regulations and policy in developed countries such as United States, Japan, EU and United Kingdom. The management strategy for the recycling cycle should be implemented to expand the labeling system of separation and discharge, reduce the consumption of plastic products, automate the separation and sorting method in recycling facilities, and improve the economical efficiency of the recycling cycle. The concept of residual waste (secondary waste) in the material flow analysis should be implemented to identify the shortage point in the plastic waste stream. Finally, the cooperation with international communities is required for a transboundary movement of plastic waste, which includes participation at the working group of international standards to recycle plastic waste.

• 한국BIM학회 논문집
• /
• 제12권2호
• /
• pp.26-39
• /
• 2022

The purpose of this study is to establish a novel system for on-site management of construction and demolition waste. Construction waste has always been one of largest waste in the world and has long lacked an effective management system. Although various countries have planned the disposal of waste at the political level, the real-time and effective management of construction sites has not been mentioned. Especially in China, the continuous development of the construction industry also generates a large amount of waste, and China is not prepared for a large amount of construction waste. In order to alleviate the huge impact of construction waste on society and the environment, this study proposes a waste management method that combines Building Information Modeling technology and Radio Frequency Identification technology. Through this research, by using information technology to manage the generation and discharge of construction waste, and record the amount and information of waste generation, also improve the management method of construction waste.

• 임상간호연구
• /
• 제29권3호
• /
• pp.327-336
• /
• 2023

Purpose: This study aimed to identify the factors affecting the practice of medical waste management of nurses in tertiary general hospitals after the coronavirus disease 2019 (COVID-19). Methods: The participants were 154 nurses working in two tertiary general hospitals. Data were collected using structured questionnaires and analyzed using an Independent t-test, One-way ANOVA, Scheffé test, Pearson correlation coefficients, and multiple regression analysis using the SPSS/WIN 27.0 program. Results: Factors significantly influencing the subject's practice of medical waste management include medical waste education(β=.18, p=.013), recognition of infection control organizational culture (β=.26, p=.007), and attitudes toward medical waste management (β=.23, p=.011). The explanatory power of these variables for medical waste management practice was 29.0% (F=7.34, p<.001). Conclusion: To improve the practice of medical waste management, a strategy to provide positive attitudes toward medical waste management should be needed when developing medical waste management training programs, and various measures are necessary to make the organizational culture positive for the implementation of infection control guidelines at the organizational level.