• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• Plant Resources
• /
• v.5 no.3
• /
• pp.206-209
• /
• 2002

This study was performed to investigate the effect of Mentha arvensis Herba extract on the treatment of chromaticity and colorfastness. Mentha arvensis Herba has been used as a Korean medicine. It is effective in headache and stress. It is also good as a aphtha and in treating cold. In the long history of Korea, dyeing has been applied for a means representing the grace of natural and inner esthetic consciousness of man. Vegetable dyes give us such great benefits, diversified color, but no pollution. And ramie fabric has distinctive features such as beautiful brilliance, elegance, and strong durability. So, it is regarded as a special product of Korea traditionally. These studies were carried out to treat with acetate iron, dichloride copper and alum with a mordant to ramie fabric. The ramie fabric was died with Mentha arvensis Herba extract. The results of experiment showed as follows: First, the chromophoric degree was the highest in acetate iron but not distinction in another mordants. Second, the light colorfastness was the highest in non treated and dichloride copper, but alum was the lowest. Third, the discoloration was alum and dichloride copper showed first grade in washing colorfastness. Abrasion colorfastness was not significant in this test. According the previous results, Mentha arvensis Herba has an efficiency in removing aphtha and in treating cold. So it is considered that Mentha arvensis Herba can be applied effectively to headache and stress.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.747-753
• /
• 2013

The physicochemical properties of sweet potato (SP) starches reclaimed from an SP-processing sludge without freezing (RC/NF) and with freezing (RC/FR) were investigated. Lab-isolated (LI) SP starch, as a control, were prepared from raw SP. RC/NF and RC/FR SP starches were recovered from SP-processing sludges by the repeated sieving and washing procedure. The total starch contents and amylopectin branch-chain distributions did not differ for three SP starches. Relative to LI and RC/NF SP starches (possessing similar physicochemical characteristics), the apparent amylose and phosphorus contents, swelling factor, and pasting viscosity were reduced for RC/FR SP starch. However, the freezing treatment altered X-ray diffraction pattern (at $5.5^{\circ}$, $11-12^{\circ}$, and $24^{\circ}$ $2{\theta}$) of RC/FR SP starch, which likely increased its gelatinization peak and completion temperatures. Its amorphous region in total diffractogram was reduced, resulting in the enhanced relative crystallinity. Overall results suggested SP starches recovered from an SP-processing sludge would have the potential to replace commercial SP starch products.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5331-5335
• /
• 2015

Purpose: The aim of this study was to compare the tumor-free and overall survival rates between patients with low-risk endometrial cancer who underwent surgical staging and those who did not undergo surgical staging. Materials and Methods: Data, including demographic characteristics, grade of the tumor, myometrial invasion, cervical involvement, peritoneal washing, lymph node involvement, lymphovascular space invasion, postoperative complication, adjuvant treatment, cancer recurrence, and tumor-free and overall survival rates, for patients with low-risk endometrioid endometrial cancer who were treated surgically with and without pelvic and paraaortic lymph node dissection (LND) were analyzed retrospectively. The patients diagnosed with endometrioid endometrial cancer including the following criteria were considered low-risk: 1) a grade 1 (G1) or grade 2 (G2) endometrioid histology; 2) myometrial invasion of <50% upon magnetic resonance imaging (MRI); 3) no stromal glandular or stromal invasion upon MRI; and 4) no evidence of intra-abdominal metastasis. Then the patients at low-risk were divided into two groups; group 1 (n=117): patients treated surgically with pelvic and paraaortic LND and group 2 (n=170): patients treated surgically without pelvic and paraaortic LND. Results: There was no statistical significance when the groups were compared in terms of lymphovascular space invasion, cervical involvement, positive cytology, and recurrence, whereas the administration of an adjuvant therapy was higher in group 2 (p<0.005). The number of patients with positive pelvic nodes and the number of metastatic pelvic nodes were significantly higher in the group with positive LVI than in the group without LVI (p<0.005). No statistically significant differences were detected between the groups in terms of tumor-free survival (p=0.981) and overall survival (p=0.166). Conclusions: Total hysterectomy with bilateral salpingo-oophorectomy and stage-adapted postoperative adjuvant therapy without pelvic and/or paraaortic lymphadenectomy may be safe and efficient treatments for low-risk endometrial cancer.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.778-789
• /
• 2011

The natural dyeing of silk fabrics with guava leaf extract was investigated. Mixed components of flavonoid and tannin seem to be the components of guava leaf extract. The temperature and time for dyeing of silk fabrics with guava leaf extract were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. The dyeing equilibrium was shown at the fourth time of repeated dyeing. The highest K/S value was recorded at pH 3. Fe-mordanted fabrics showed the highest K/S value. High K/S values were shown in the post-mordanting of dyed fabrics at $40^{\circ}C$ and the pre-mordanting of dyed fabrics at $90^{\circ}C$. After repeated dyeing and mordanting, various color change occurred with mordant treatment. Surface colors were changed to YR color in alkaline water extract and to Y color in acidic water and ethanol extract, respectively. The washing fastness was level 3-4 for Sn-mordanted fabrics and level 4 for Fe-mordanted fabrics, and the dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was satisfactory with level 3-4. The light fastness was above level 4 only when Fe-mordanting was conducted, and the rest of dyed fabrics was not fast enough. In the antibacterial activity, the powder of guva leaf extract showed 99.9% of high antibacterial activity and Staphylococcus aureus showed 99.6% in dyed fabric. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.930-934
• /
• 2002

Nanosized $WO_3$ powders were synthesized by the sol-precipitation process using $WCl_{6}$ as the starting material, ethanol as a solvent and $NH_4$OH solution as a precipitant, followed by a washing-drying treatment and calcination. The effects on the powder crystallinity and microstructure of calcination temperature were investigated with XRD and FE-SEM. The $WO_3$ powders calcined at $500^{\circ}C$ and $700^{\circ}C$ showed good crystallinity and their mean particle size was 30nm and 70nm, respectively. These powders were used for the preparation of pastes which were printed as thick films on alumina substrates with comb-type Pt electrodes. The particle size strongly influenced the $NO_2$ gas sensing property of the thick films. A significant reduction in the $NO_2$ sensitivity was observed for the film prepared from larger particle size, having thus a larger grain size. For the film having a smaller grain size, on the other hand, the higher $NO_2$ sensitivity was observed and the sensitivity increased with $NO_2$ concentration.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.447-459
• /
• 1994

The purpose of this study is to evaluate of shear bond strength of light-curing composite resin to light-curing glass ionomer cement. Composite resin and glass ionomer cement have been widely used as an esthetic filling materials in dental clinics. To achieve better clinical results, sandwich technic was developed with conpensating for disadvantages of these two materials. Especially, light-curing glass ionomer cement provided greately improved bonding strength of teeth or composite resin, and then excellent clinical results can be acquired. In this study, 6 commercial light-curing glass ionomer cements(3 commercial restorative materials : Fuji II LC, Variglass VLC, Vitremer, and 3 commercial lining materials : Fuji Lining LC, Baseline VLC, Vitrebond) were devided two groups. According to manufacturer's appointment, no surface treatment was referred to N groups. Supposing. of clinical practice, surface grinding with water spray at 320 grit sand paper, 40 seconds etching with 37% phosphoric acid, 20 seconds washing, 20 seconds air drying was referred to N groups. Totally 12 experimental groups were devided, and all 120 specimens from 10 specimens of each groups were made. After light-curing composite resin was bonded to light-curing glass ionomer cement, shear bond strength was tested by Instron universal testing machine between glass ionomer cement and composit resin. The data were analyzed statistically by Student's t-test and ANOVA. The obtained results were as follows; 1. In light-curing glass ionomer cement, restorative materials showed higher shear bond strength to composite resin than lining materials(p<0.05). 2. Variglass VLC of restorative material group and Baseline VLC of lining material group have highest shear bond strength to composite resin(p<0.001). 3. In light-curing glass ionomer cement, surface grinding and acid etching reduced shear bond strength to composite resin(p<0.001)}. 4. VGN group 1s highest shear bond strength to composite resin, VBE group is lowest shear bond strength to composite resin(p<0.001).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.891-900
• /
• 2001

The purpose of this study were to evaluate the physical properties and dyeability of cellulase and alkali(NaOH, KOH) treated ramie/man-made fiber mixture fabrics. The mixture fabrics were plain weave made by rayon and polyester fiber as warp yarn, and ramie as weft yarn. The crease resistance, drape, tensile strength, and water absorbancy were measured for test fabrics. The K/S value of dyed fabrics were calculated using color difference meter. Also colorfastness to washing and sunlight of dyed fabrics were evaluated. The results obtained from this study were as follows: Thickness and weight per unit area of alkali treated two mixture fabrics(rayon/ramie, polyester/ramie) increased compared to those of untreated fabrics, but cellulase treated fabrics did not changed a little. And alkali treated rayon/ramie mixture fabrics showed more change than polyester/ramie mixture fabrics on the thickness and weight. Tensile strength and water absorbancy of cellulase treated fabrics decreased compared to those of untreated, but crease resistance increased. Crease resistance, tensile strength(warp direction), water absorbancy and drape of NaOH treated rayon/ramie mixture fabrics decreased compared to those of untreated, but tensile strength(weft direction) increased. Water absorbancy and drape of NaOH treated polyester/ramie mixture fabrics decreased compared to those of untreated, but crease resistance and tensile strength(weft direction) increased. Tensile strength of KOH treated two mixture fabrics increased compared to that of untreated, but water absorbancy and drape decreased. Total hand of cellulase and alkali treated rayon/ramie mixture fabrics was improved compared to untreated. Dyeability of treated mixture fabrics was increased compared to untreated.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.247-260
• /
• 2005

Extractable concentrations (0.1 N & 1.0 N HCI) of heavy metals in roadside sediments are lower than guidelines for soil recommended by Ministry of Environment. Heavy traffic areas (such as No. 7 national road) show high contents of heavy metals, especially, at curved areas, gully pot, crackdown areas on overspeed, pedestrian crossing etc. Fine fractions $(<63\;{\mu}m)$ of roadside sediments have the highest concentrations of heavy metals, but mass loadings of heavy metal are determined by coarse fractions $(>100{\mu}m)$, due to washing out of fine fraction sediment by runoff water. Proper treatment facilities are needed to control the inflow of fine roadside sediments from No. 7 national road and bridge such as Hanmul bridge.