• 한국염색가공학회지
• /
• 제7권2호
• /
• pp.70-76
• /
• 1995

The polyepichlorohydrine(poly(ECH)) was prepared by the condensation polymerization of epichlorohydrine. The cationic agent was prepared from poly(ECH) by amination of poly(ECH) with dimethyleneamine. Pretreatment of cellulosic fabric with the poly(ECH)amine produced a modified fabrics that could be dyed under neutral condition with reactive dye using small amount of the salt. Colour yield of cellulosic fabric were increased by increasing salt concentraction. cationic agent concentration. The optimum condition for colour yield was the concentration of cationic agent 5%(o.w.f), that of NaCl 4g/l, and that of $Na_{2}CO_{3}$5g/l. The dyeing of treated fabrics exhibits improved colour yield and high wash fastness.

• Fibers and Polymers
• /
• 제3권4호
• /
• pp.140-146
• /
• 2002

Non-genotoxic diamines 2,2'-dimethyl-5,5'-dipropoxybenzidine and 5,5'-dipropoxy-benzidine were employed as potential alternatives to benzidine in the synthesis and evaluation of new direct dyes for cotton. Assessment of the resultant dyes indicated that both diamines can be used to prepare new direct dyes having colors and fastness properties that make them comparable to commercial direct dyes, and that the structures of the new direct dyes can be confirmed by negative ion electrospray mass spectrometry (ESMS). The mutagenic properties of new direct dyes were established using the standard Ames Salmonella mammalian mutagenicity assay.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.1-9
• /
• 1997

Four aminoazobenzene disperse dyes derived from different N-ethyl-N-substitutedalkylanilines and 2-chloro-4-nitroaniline, were synthesized and their chemical structure were analyzed by 500 MHz NMR spectroscopy. The wavelength of maximum absorption of the synthesized dyes, which was dependent on the electron withdrawing ability of the substituent, was in the range of 499.5~526.0nm. As terminal substituent became polar, the dyeing rate of disperse dye increased, and the exhaustion rate of dyes having cyano or hydroxy group became lower, that of the dye having acetoxy group higher. The wash fastness of polyester fabric dyed with disperse dyes possessing the polar group improved probably due to the increased dye-fiber interaction.

• Current Research on Agriculture and Life Sciences
• /
• 제30권2호
• /
• pp.76-81
• /
• 2012

본 연구에서는 검정팥 종피에 함유된 천연색소에 대한 연구의 일환으로, 천연염료로서의 적용을 위해 염색조건 즉 염색온도, 염색시간, 염색 pH, 욕비에 따른 K/S 값을 측정하여 적정 염색조건을 설정하고, 여러 매염제를 적용하여 색상변화에 미치는 영향 및 견뢰도를 측정하여 다음과 같은 결과를 얻었다. 1. pH에 따른 염색성에서는 견직물의 경우 pH 4에서 가장 염착량이 많았고, 면직물의 경우에는 주어진 범위 내에서 는 pH가 높을수록 염착량이 많았다. 2. 염색온도와 시간에 따른 염색성은, 견직물의 경우, 염색온도 $40^{\circ}C$와 $60^{\circ}C$에서는 전반적으로 염착량이 낮고 시간에 따른 염착량의 차이도 크지 않았으나 염색온도 $80^{\circ}C$에서는 시간이 경과할수록 K/S 값이 크게 나타났다. 면직물의 경우도 견직물과 비슷한 결과로 온도가 높아질수록 염색시간이 경과될수록 K/S 값이 크게 나타났다. 3. 견직물에 대한 매염제 종류별 표면색의 변화에서는 Fe 매염포만 YR${\rightarrow}$Y 로 변화되었을 뿐 다른 매염제에서는 매염후에도 색상 변화는 크지 않았다. Sn 매염과 Ti 매염포는 무 매염포 보다 $L^*$값이 상승하였으나 나머지 매염제는 $L^*$값이 크게 감소되었다. 면직물에 대한 표면색의 변화는 견직물에서와 같은 경향으로 나타났으며, $L^*$값에 있어서는 견직물과 다르게 Ni 매염포만 무매염포보다 $L^*$ 값이 크게 나타났다. 4. 매염처리 전 견직물의 일광 견뢰도는 무매염이 4~6등급, Al 처리포는 4~5등급, Cu와 Sn은 3~4등급으로 나타났고 Fe는 2~3등급으로 가장 낮게 나타났으며, 세탁견뢰도에서는 무매염 2등급, 매염제 처리포는 전부 2내지 3등급으로 나타났다. 무매염 면직물의 일광견뢰도는 1~2등급, Fe 매염은 2~3등급, Cu 2등급 Al과 Sn은 1~2등급으로 매염처리에 의해 전혀 개선되지 않았으며, 세탁견뢰도의 경우 Cu매염이 4등급으로 양호하게 나타났으며 무매염, Al, Sn과 Fe는 3등급으로 나타났다.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.34-42
• /
• 1996

This Study was made to investigate alkaline dyeing systems for a new dyeing applicable polyester fibers. Disperse dyes for dyeing of polyester fibers were C.I. Red 60, Blue 56 and Yellow 54 as three primary colors of E type which used widely on the scene. Dyeing properties of dispers dyes on the polyester fibers are discussed according to variation of pH values for application of alkaline dyeing method compared with to ordinary acidic dyebath. Alkaline pH of the dyebath was controlled to pH 9 and 10.5 with buffer solutions using each hydrochloride and disodiumtetraborate, disodiumtetraborate and sodium hydroxide to promote the reproducibility of dyeing. Dyeing properties of dispers dyes on the polyester fibers by alkaline dyeing method compared with to ordinary acidic dyebath were discussed by estimation of color, wash-fastness, bleeding and migration of dyed polyester fabric.

• 복식문화연구
• /
• 제13권4호
• /
• pp.576-588
• /
• 2005

The effect of chitosan pretreatment on the dyeing of cotton fiber and silk fiber was investigated. However, it has been difficult to evaluate the effect of the chitosan precisely, since the characterization of the molecular weight and effect of the degree of deacetylation were not elucidated for the application. The treatment effect may change diversely since the chitosan solution viscosity differs a lot based on the chitosan molecular weight. In this study, three chitosan specimens, varying in molecular weight, were applied for the fabric pretreatment in order to investigate the effect of chitosan molecular weight. Also, in order to maximize the efficacy of the chitosan, highly deacetylated chitosan specimens, meeting the deacetylation degree of $100\%$, were selected far the application. The air-permeability change according to the chitosan molecular weight change, influence on the mordanting, color change, and wash fastness change were investigated.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.788-799
• /
• 1999

This study was performed to investigate the effect of mordants on the dyeability colorfastness to light and to laundering and biological properties of mordanted and natural-dyed cotton and silk substrates. Natural red dyes were extracted from Caesalpinia Sappan L. (Sappan wood) and Rubia Akane Nakai (Madder) by boil water Five different compounds of Al, Cr, Cu, Fe and Sn were used as mordanting agents. The result of this study are sumarized as follows ; 1. In the of the fabrics mordanted and dyed with sappan wood K/S value increases and λmax shifts to the longer wavelength as mordant concentration increases. Color of the fabrics dyed with sappan wood and madder change to redder bluer and lighter after mordanting. 2. As the number of repetition of dyeing-mordnating process increase the color of the dyed fabrics tend to be redder bluer and darker. Mordanted dyes with Al and Sn make chroma increase. The quantity of mordant absorbed in the silk fabric increase as mordant concentration increase. More Fe is absorbed in silk than Cr is. 3. After being exposed to light the fabrics dyed with sappan wood and madder change to less red Fe and Cu mordanting yeild better colorfastness to light than others does. Natural-dyed fabrics exposed to light tend to be faded and whitened in CIELAB chromaticity co-ordinates. So we might trace back the original color of ancient faded fabrics by changes in color of natural dyes. 4. After washing the colors of natural dyes change to more blue, Fe and Cu mordanting give better colorfastness to wash than others do. 5. The soil-burial cotton is more susceptible to mildew and rot than the silk is. Antimicrobial activity of the natural-dyed cotton can be enhanced by Cu and silk can be enhanced by Cu and Cr mordanting respectively.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.