• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.75-78
• /
• 2000

There are several effective factors to influence die life in the warm forging process. For instance process design die design and die materials etc This study presented heat treatment method which could improve toughness and wear resistance simultaneously in high temperature to apply high speed tool steels like SKH51 to die material for warm forging process. To verify the feasibility of application of heat treatment method mentioned above wear test was performed under the condition of constant time in 40$0^{\circ}C$ Wear coefficient was examined to search a relation between wear amount and time for each material and heat treatment method in 30, 60, and 130 minutes. To quantify the toughness-behavior between room and high temperature impact test was performed and heat fatigue test also fulfilled to compare with the resistance of heat check in room, 200, 400, and $600^{\circ}C$ temperature. On the basis of experimental results mentioned above high speed tool steel was applied to verify appropriateness of newly proposed heat treatment method for die of rotor pole used in automobile alternator. As a result die life of high speed tool steel applied newly proposed heat treatment is longer than that of STD61.

• Journal of the korean society of oceanography
• /
• 제34권1호
• /
• pp.1-21
• /
• 1999

A two-layer quasi-geostrophic numerical model is used to investigate the temporal variability of the East Korea Warm Current (EKWC), especially the separation from the Korean coast and the generation of warm eddies. An attention is given on the active role of the nonlinear boundary layer process. For this, an idealized flat bottom model of the East Sea is forced with the annual mean wind curl and with the inflow-outflow specified at the Korea (Tsushima) and Tsugaru Straits. Two types of separation mechanisms are identified. The first one is influenced by the westward movement of the recirculating leg of the EKWC (externally driven separation),the second one is solely driven by the boundary layer dynamics (internally driven separation). However, these two processes are not independent, and usually coexist. It is hypothesized that 'internally driven separation' arises as the result of relative vorticity production at the wall, its subsequent advection via the EKWC, and its accumulation up to a critical level characterized by the separation of the boundary flow from the coast. It is found that the sharp southeastern corner of the Korean peninsula provides a favorable condition for the accumulation of relative vorticity. The separation of the EKWC usually accompanies the generation of a warm eddy with a diameter of about 120 km. The warm eddy has a typical layer-averaged velocity of 0.3 m/s and its lifespan is up to a year. In general, the characteristics of the simulated warm eddy are compatible with observations. A conclusion is therefore drawn that the variability of the EKWC is at least partially self-excited, not being influenced by any sources of perturbation in the forcing field, and that the likely source of the variability is the barotropic instability although the extent of contribution from the baroclinic instability remains unknown. The effects of the seasonal wind curl and inflow-outflow strength are also investigated.

• Korean Journal of Acupuncture
• /
• 제34권3호
• /
• pp.109-115
• /
• 2017

Objectives : Many researches have studied warm needling technique to standardize its treatment by temperature measurement and material differences in the effectiveness. The purpose of this study is to compare the temperature changes of the acupuncture needle shaft during the combustion process of the moxa stick to determine the heat transfer pattern of the warn needling. Methods : A moxa stick($7{\times}8mm$) was connected to one side of the needle shaft using a stainless steel needle(ø 0.3 mm, ø 0.5 mm, ø 0.8 mm, shaft length 40 mm) with the needle handle removed. During the warm needling, temperature changes of the needle shaft were observed with an infrared camera(Flir E30) and an infrared thermometer(TESTO 845). Results : In the normal condition, heat transmit of needle shaft increased at spots 10 mm and 25 mm below the moxa stick. The amount of heat transmit increased with the diameter of needle shaft. However, when the heat shield was installed to exclude radiant heat from the moxa stick, heat transfer was less at 10 mm below the moxa stick and no temperature change was observed at 25 mm below the moxa stick. Heat transfer by warm needling does not reach the end of needle shaft even in ø 0.8 mm needle. Conclusions : It is suggested that the radiant heat of moxa stick results in the heat transmit of acupuncture needle shaft. Thus, radiant heat transmit must be considered as one of the heat transfer characteristics of the warm needling.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.95-100
• /
• 1998

The purpose of this study is to describe the change of the spring bloom and oceanographic condition. The variation of pigment concentration derived from the satellite ocean color data has been analyzed. According to the movement of blooming area, blooming was very concerned with a rising trend of sea surface temperature and a supply of nutrients. A nutrient rich water carried by the Oyashio encounters with the warm Core ring, where mixings and blooms are observed. We examined the correlation by using the satellite observations of the temperature and chlorophyll-a for the spring seasons (May, June, July) of 1998 the off Sanriku area (38-43N, 141- l50E). Using the SeaWiFS data, we process the data into the level-3, which contains the geophysical value of chlorophyll-a. And chlorophyll-a data is mapped for the water between 110E and 160E, and 15N and 52N with a 0.08 * 0.05 degree grid for each image. And Sea Surface Temperature (SST) data is produced using the AVHRR onboard the NOAA. The SST is derived by the MCSST. Then, the data is mapped for the water as much as chi-a data. And these gridded image was made by detection of each water masses, which are Kuroshio Extension, the warm-core ring and the Oyashlo Intrusion, etc., using those satellite images to determine short term change. Off Sanriku is a place where warm-water pool and the Oyashio at-e mixed. When warm streamer has intruded in cold water, the volume of phytoplankton increases at the tip of warm streamer. Warm water streamer was trigger of occurring blooming. And also, SeaWiFS images provided as much information for the studies of chlorophyll-a concentrations in the surface.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.482-490
• /
• 2021

This research was conducted to analyze the sound absorption effect of air-dried leaves from two evergreen tree species found in Korea's warm-temperate and subtropical regions. As eco-friendly sound absorption materials, Dendropanax morbiferusa, and Fatsia japonica leaves were prepared in three specimen units sizes 0.5 × 0.5 cm², 1.0 × 1.0 cm², and 2.0 × 2.0 cm², and each of them was formed at a thickness of 1.00 cm, 1.75 cm, and 2.50 cm. The measured sound absorption coefficients (SAC) for 18 conditions were comparatively analyzed in this study. The SAC of both tree species was significantly improved by increasing the dried leaf layer thickness. These results showed a more consistent and distinct trend for both tree species under the condition of 0.5 cm² in dried leaf size compared to other leaf specimen sizes. However, as the thickness increased, the difference in sound absorption effect according to the leaf size tends to decrease overall. In the case of D. morbiferus, there was no significant difference in SAC based on leaf size under the condition of 2.5 cm thickness (p < 0.05). The highest mean SAC was found in a 2.5 cm thick condition with a leaf size of 0.5 × 0.5 cm², 0.549 for D. morbiferusa, and 0.594 for F. japonica, respectively.

• 사상체질의학회지
• /
• 제21권3호
• /
• pp.89-106
• /
• 2009

1. Objectives: The aim of this study was to survey the tendency of perspiration and health condition of Sasang Constitution and to analysis the relationship between health condition and perspiration. 2. Methods: We recruited 1565 subjects in multi-oriental hospitals and researched their perspiration and health condition. Subjects were diagnosed by the Sasang Constitutional specialists in oriental hospitals, and had remarkable improvement in their chief complains after Sasang Constitutional Medication. All subjects answered the questionnaire about the tendency of perspiration including the amount and region of sweating, and the health condition such as meal, appetite, tiredness, health degree, and warm-cold preference. Based on these clinical data, we analyzed the Sasang Constitutional deviation of health condition according to the tendency of perspiration. We found the differences of answering using Chi-square test between-group comparison. We analyzed using SPSS 14.0 for Korean. 3. Results: The amount of sweating was related with degree of health condition such as tiredness, health degree, meal, appetite, and warm-cold preference. However there was no significant differences between Sasang Constitutional groups. 4. Conclusions: According the region of sweating, there was some deviation of health conditions between Sasang Constitution. Especially sweating of head and neck meant good symptom for SE type but not for SY type. And the sweating on the chest and axilla meant bad symptoms for all Sasang Constitutional types.

• Ocean and Polar Research
• /
• 제31권1호
• /
• pp.121-131
• /
• 2009

In an effort to better understand the physiological and ecological differences between warm and cold water copepod species in Korean waters using lipid contents and compositions, two species of copepods (Pleuromamma sp. as a warm water species and Neocalanus plumchrus as a cold water species) were collected from the Northwest Pacific and East Sea/Sea of Japan, respectively. The cold water species showed two fold higher lipid contents than the warm water species (11% vs. 5% of dry weight). Wax esters, known as one of the major storage lipid classes, were found to be the dominant lipid class (accounting for 64% of total lipids) in the cold water species, whereas, in the warm water species, phospholipids, which are known as membrane components, were the dominant lipid class (accounting for 43% of total lipids),with a trace amount of the storage lipids as a form of triacylglycerols (${\leq}1%$ of total lipids). With regard to the fatty acid compositions, saturated fatty acids (SAFA), especially 16:0 (about 30% of total fatty acids), were most abundant in the warm water species, whereas the polyunsaturated fatty acids (PUFA), particularly eicosapentaenoic acid (EPA : 20:5(n-3)) (${\geq}16%$ of total fatty acids), were most abundant in the cold water species. Among the neutral fraction of lipids, phytol, originating from the side chain of chlorophyll and indicative of active feeding on phytoplankton, was detected only in the warm water species. Significant quantities of fatty alcohols were detected in cold water species, particularly long-chain monounsaturated fatty alcohols (i.e. 20:1(n-9) and 22:1(n-11)), which are well known to abound in cold water herbivorous copepods. However, only trace amounts of short-chain fatty alcohols were detected in the warm water species. Twelve different kinds of sterols were detected in these copepod species, with cholest-5-en-$3{\beta}$-ol (cholesterol) and cholesta-5, 24-dien-$3{\beta}$-ol (desmosterol) dominating in cold and warm water species, respectively. In addition, for the warm water species (Pleuromamma sp.), we assessed the latitudinal gradients of lipid contents and compositions using samples from three different latitudinal regions (Philippine EEZ, Japan EEZ, and the East China Sea). Although no latitudinal gradients of lipid contents were detected, the lipid compositions, particularly dietary fatty acid markers, varied significantly with the latitude. The findings of this study confirm that the distribution of lipid contents and compositions in copepods may not only indicate their nutritional condition and diet history, but may also provide insights into their living strategies under different environmental conditions (i.e., water temperature, food availability).

• 한국환경생태학회지
• /
• 제25권1호
• /
• pp.47-56
• /
• 2011

본 연구는 기후변화에 따른 한반도 난온대 상록활엽수의 분포변화와 CT분석을 이용하여 난온대 상록활엽수의 분포를 규정하는 기후요인과 분포적지를 밝히는 것을 목적으로 실시하였다. CT분석을 통해 구축된 한반도 난온대 상록활엽수 분포 모델(EG-model)에서 TMC(최한월최저기온)가 분포를 규정하는 주요 요인으로 작용하였으며, TMC(최한월최저기온)의 $-5.95^{\circ}C$이상을 난온대 상록활엽수의 분포적지로 하고 있다. 이러한 TMC값을 CMT(최한월평균기온)으로 환산한 값인 $-1.7^{\circ}C$는 동아시아 지역 상록활엽수림의 내성한계 온도인 최한월평균기온 $-1^{\circ}C$다 약간 낮은 것으로 분석되었다. 한반도의 난온대 상록활엽수는 최한월최저기온(TMC) $-5.95^{\circ}C$이상의 따듯한 지역에서는 하계강수량 (PRS)이 826.5mm이상인 지역에서, 최한월최저기온(TMC) $-5.95^{\circ}C$미만의 추운 지역에서는 하계강수량이 1219mm이상인 기후조건에서 높은 분포확률을 나타내었다. 이러한 분포경향은 일본의 난온대 상록활엽수의 분포경향과 비슷하였다. 또한, 난온대 상록활엽수는 한반도의 기온상승에 따라 고위도 및 남부내륙으로 분포를 확대하고 있으며 난온대 상록활엽수의 북방한계선 변화를 시사하고 있다.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.41-55
• /
• 1987

The purpose of this study is to investigate the effects of napping of knitted fabric on wear sensation and physiological responses. Experimental garments were four types of warm-ups made of either $100\%$ PET or $65/35\%$ P /C and either napped or unnapped respectively. Two healthy young female adults were chosen as subjects for the experiment. Experimental room conditions were as follows: Temp., $22\pm0.5^{\circ}C$ R.H., $54\pm3\%$ and Air Velocity, 0.25m/ sec or 2. 86m/sec. The subjects exercised on bicycle ergometer and rested alternatively for totally 45-min. The results are summarized as follows. 1) With napped Warm-up, chest, back, mean skin temp. and microclimates, i.e., temp., relative humidity and water vapor pressure inside the clothing, were higher than with unnapped warm-up. And there was no difference in pulse rate between napped and unnapped warm-ups. 2) Wear sensations of thermal, humidity, tactile and comfort were 'more hot' and 'more uncomfortable' in 0.25m/sec air velocity. but in 2.86m/sec condition the tactile sensation was 'better' and 'more comfortable' with napped warm-ups. According to Pearson's Correlation, among various kinds of wear sensations, tactile is most related with comfort. From these results, it can be concluded that napped fabric decreases the rate of heat trans? mission and moisture diffusion through the clothing. Therefore skin and body temp. and temp., R.H., Vapor Pressure inside the clothing are increased.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.49-54
• /
• 2010

자동차의 A.C 제너레이터(alternating current generator) 부품으로 사용되는 로터폴(rotor pole)을 가공할 때는 트랜스퍼온간단조금형(transfer warm forging die)으로 성형한다. 소재를 온간가공 영역으로 가열한 후 즉시 금형안으로 이송시켜 제1스테이지(1st stage)에서 업세팅가공(upsetting work)하고 제2스테이지(2nd stage)로 이송하여 측방압출(lateral extrusion)가공을 한다. 이때 측방압출 스테이지의 금형에서 다이블록(die block), 다이부싱(die bushing), 센터펀치(center punch), 사이드펀치(side punch)의 접촉면이 압출시의 과혹(過酷)한 조건에 견디지 못하여 쉽게 마멸(abrasion)되어 금형수명(die life)을 단축시키고 있다. 이 때문에 생산량 감소로 인한 납기지연, 금형의 수리보수시간 과다, 제품의 정밀도 저하 등의 문제점이 발생되고 있다. 이러한 문제점을 해결하기 위하여 금형재질 선정과 열처리 작업 싸이클 개선, 방전가공시의 트러블 해소, 핵심부품의 구조변경 등을 연구하여 금형수명을 40~50% 연장 하고자 하였다.