• 한국해안·해양공학회논문집
• /
• 제26권5호
• /
• pp.335-341
• /
• 2014

이 연구에서는 단면 수리모형실험을 통해 파의 여러 위상에 따라 단일 및 이중유수실 유공케이슨 방파제의 연직벽에 작용하는 최대 수평파력을 계측하고 그 크기를 서로 비교하였다. 본 실험 자료 분석 결과 이중유수실 케이슨의 유수실 전체 폭이 단일유수실의 폭과 동일한 경우 이중유수실 케이슨에 작용하는 총 수평파력이 평균적으로 9.6% 작은 것으로 나타났다. 이러한 파력 저감 효과는 이중유수실 케이슨 방파제의 유공 전면벽과 무공 후면벽 사이에 위치한 유공 중간벽에서 파 에너지가 소산되기 때문인 것으로 파악되었다.

• Steel and Composite Structures
• /
• 제37권3호
• /
• pp.341-351
• /
• 2020

Steel plate shear wall with self-centering energy dissipation braces (SPSW-SCEDB) is a lateral force-resisting system that exhibits flag-shaped hysteretic responses, which consists of two pre-pressed spring self-centering energy dissipation (PS-SCED) braces and a wall plate connected to horizontal boundary elements only. The present study conducted a series of cyclic tests to study the hysteretic performances of braces in SPSW-SCEDB and the effects of braces on the overall hysteretic characteristics of this system. The SPSW-SCEDB with PS-SCED braces only exhibits excellent self-centering capability and the energy loss caused by the large inclination angle of PS-SCED braces can be compensated by appropriately increasing the friction force. Under the combined effect of the two components, the SPSW-SCEDB exhibits a flag-shaped hysteretic response with large lateral resistance, good energy dissipation and self-centering capabilities. In addition, the wall plate is the primary energy dissipation component and the PS-SCED braces provide supplementary energy dissipation for system. The PS-SCED braces can provide up to 90% self-centering capability for the SPSW-SCEDB system. The compressive bearing capacity of the wall plate should be smaller than the horizontal remaining restoring force of the braces to achieve better self-centering effect of the system.

• Earthquakes and Structures
• /
• 제16권2호
• /
• pp.209-219
• /
• 2019

Unbonded Post-Tensioned (UPT) precast concrete systems have been shown to provide excellent seismic resistance. In order to improve understanding of the dynamic response of UPT systems, a series of snap back tests on four UPT systems was undertaken consisting of one Single Rocking Wall (SRW) and three Precast Wall with End Columns (PreWEC) systems. The snap back tests provided both a static pushover and a nonlinear free vibration response of a system. As expected the SRW exhibited an approximate bi-linear inertia force-drift response during the free vibration decay and the PreWEC walls showed an inertia force-drift response with increased strength and energy dissipation due to the addition of steel O-connectors. All walls exhibited negligible residual drifts regardless of the number of O-connectors or the post-tensioning force. When PreWEC systems of the same strength were compared the inclusion of further energy dissipating O-connectors was found to decrease the measured peak wall acceleration. Both the local and global wall parameters measured at pseudo-static and dynamic loading rates showed similar behaviour, which demonstrates that the dynamic behaviour of UPT walls is well represented by pseudo-static tests. The SRW was found to have Equivalent Viscous Damping (EVD) between 0.9-3.8% and the three PreWEC walls were found to have maximum EVD of between 14.7-25.8%.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.83-89
• /
• 2011

Laminar flow over a cube near a plane wall is numerically investigated in order to understand the effects of the cube-wall gap on the flow characteristics as well as the drag and lift coefficients. The main focus is placed on the three-dimensional vortical structures and its relation to the lift force applied on the cube. Numerical simulations are performed for the Reynolds numbers between 100 and 300, covering several different flow regimes. Without a wall nearby, the flow at Re=100 is planar symmetric with no vortical structure in the wake. However, when the wall is located close to the cube, a pair of streamwise vortices is induced behind the cube. At Re=250, the wall strengthens the existing streamwise vortices and elongates them in the streamwise direction. As a result, the lift coefficients at Re=100 and 250 increase as the cube-wall gap decreases. On the other hand, without a wall, vortex shedding takes place at Re=300 in the form of a hairpin vortex whose strength changes in time. The head of hairpin vortex or loop vortex, which is closely related to the lift force, seems to disappear due to the nearby wall. Therefore, unlike at Re=100 and 250, the lift coefficient tends to decrease more or less as the cube approaches the wall.

• Steel and Composite Structures
• /
• 제22권5호
• /
• pp.1055-1071
• /
• 2016

The paper presents an innovative steel moment frame with the replaceable reinforced concrete wall panel (SRW) structural system, in which the replaceable concrete wall can play a role to increase the overall lateral stiffness of the frame system. Two full scale specimens composed of the steel frames and the replaceable reinforced concrete wall panels were tested under the cyclic horizontal load. The failure mode, load-displacement response, deformability, and the energy dissipation capacity of SRW specimens were investigated. Test results show that the two-stage failure mode is characterized by the sequential failure process of the replaceable RC wall panel and the steel moment frame. It can be found that the replaceable RC wall panels damage at the lateral drift ratio greater than 0.5%. After the replacement of a new RC wall panel, the new specimen maintained the similar capacity of resisting lateral load as the previous one. The decrease of the bearing capacity was presented between the two stages because of the connection failure on the top of the replaceable RC wall panel. With the increase of the lateral drift, the percentage of the lateral force and the overturning moment resisted by the wall panel decreased for the reason of the reduction of its lateral stiffness. After the failure of the wall panel, the steel moment frame shared almost all the lateral force and the overturning moment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1676-1681
• /
• 2003

The attachment of mobile vehicle is necessary for the automated operation on the inclined or vertical walls of steel structures. Since the vehicle requires attaching devices additionally, its overall efficiency can be reduced by the devices. Therefore, external shapes of mobile vehicles have to be researched to give the effective movement on the vertical face. For the design of mobile vehicle, the guideline has been derived from the modeling of wall-climbing, so that the vehicle should have a specific external shape for vertical movement due to the gravitational force. Hence, some adequate arrangement of attaching device to the mobile vehicle has been presented for the effective movement. In the experiments with four permanent magnetic wheels, a plausible result was achieved as a vertical attaching force of 185.2(N), a friction force of 153.8(N) and a curvature radius of 1.4m. The mobile vehicle should be modified according to the proposed design guideline. and then it could be applied to a specific operation as an appropriate external shape. Also, Further research is recommended on an optimal posture and a moving method in a specific application. as the attaching force ortho vehicle can be affected by its posture.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.77-84
• /
• 2004

The attachment of mobile vehicle is necessary for the automated operation on the inclined or vertical walls of steel structures. Since the vehicle requires attaching devices additionally, its overall efficiency can be reduced by the devices. Therefore, external shapes of mobile vehicles have to be researched to give the effective movement on the vertical face. For the design of mobile vehicle, the guideline has been derived from the modeling of wall-climbing, so that the vehicle should have a specific external shape for vertical movement due to the gravitational force. Hence, some adequate arrangement of attaching device to the mobile vehicle has been presented for the effective movement. In the experiments with four permanent magnetic wheels, a plausible result was achieved as a vertical attaching force of 185.2(N), a friction force of 153.8(N) and a curvature radius of 1.4m. The mobile vehicle should be modified according to the proposed design guideline, and then it could be applied to a specific operation as an appropriate external shape. Also, Further research is recommended on an optimal posture and a moving method in a specific application, as the attaching force of the vehicle can be affected by its posture.

• 한국지반공학회논문집
• /
• 제39권11호
• /
• pp.7-22
• /
• 2023

최근 지하안전에 관한 특별법이 시행(2022년 1월)되었으며, 지하안전영향평가를 통해 계획단계부터 지하안전에 관한 사전검토가 실시되고 있다. 지하굴착을 위해서는 가설 흙막이의 구조 안전성을 확보하는 것이 중요하므로 지하안전 검토는 더욱 강화되고 있다. 본 연구에서는 토사지반에서 Soil-Cement 흙막이의 벽체 두께를 확대하고 H-pile의 선택과 설치간격을 자유롭게 할 수 있는 MFS(Multi-axis Flat Continuous Soil Cement Earth Retaining Wall) 흙막이 벽체 공법의 거동 특성을 분석하였다. 실내모형실험을 통해 MFS 공법의 H-pile 설치간격에 따른 벽체에 작용하는 하중-변위 거동을 확인하였으며, MFS 흙막이 벽체의 두께별 H-pile 설치간격 및 크기 변화에 따른 하중-변위를 3차원 수치해석으로 분석하여 벽체에 작용하는 아칭효과 높이를 산정하였다. MFS 공법에서 산정한 최대 아칭높이를 기존의 부재력 검토 방법에 적용하여 벽체에 작용하는 축력, 전단력을 정량적으로 분석하는 설계방법을 제시하였다. 그 결과 MFS 흙막이 벽체에 적용되는 H-pile 설치 간격 및 크기에 따른 축력 및 전단력이 24.6~62.9%가 저감하는 것을 확인하였다.

• 한국해안·해양공학회논문집
• /
• 제32권3호
• /
• pp.161-169
• /
• 2020

테트라포드로 피복된 경사식방파제 상부구조물에 파가 경사 입사할 때의 파력 변화를 관찰하기 위한 수리모형실험을 수행하였다. 입사파향은 0, 15, 30, 45° 4가지로 변화시켰으며 상부구조물 전면 및 하부면에 파압계를 부착하여 수평 및 연직파력을 계측하였다. 실험을 통해 입사각과 구조물 전면이 이루는 각도가 증가할수록 수평 및 연직 파력이 모두 감소함을 확인하였다. 실험자료 분석 결과로부터 입사파향에 대한 수평 및 연직 파력 감소율 산정식을 각각 제시하였다.

• 전산구조공학
• /
• 제11권1호
• /
• pp.251-259
• /
• 1998

개구부를 갖는 콘크리트 전단벽을 두께가 얇은 직사각형 평판으로 모델화하였다. 판의 두가지 경계조건에 대한 안정해석 결과를 판좌굴계수 k로 표시하였다. 경계조건이 다른 변수로는 휨으로 인한 힘/연직하중비 .alpha., 수평 전단력/연직하중비 .betha. 및 개구부의 위치 및 크기 변화이다. 유한요소법에 의한 결과를 얻기 위하여 예제의 판을 27*9의 정사각형 요소로 분할하였으며 node에서 3가지 자유도를 갖는 c.deg. 유한요소를 택하였다. 일반적으로 개구부의 크기가 증가함에 따라 판 개구부가 판 중앙에서 자유연(free edge)으로 접근할수록 좌굴계수는 감소하는 현상을 보이고 있다.