• 보존과학회지
• /
• 제36권4호
• /
• pp.284-295
• /
• 2020

This study focuses on reinforcement agents for wall damage, such as cracks, breakage, or delamination, for mural paintings from the Payathonzu temple. Experiments were conducted with filling and grouting agents based on the reinforcing method. In the filling reinforcement experiment, different mixing ratios of lime to sand, and additives (jaggery, seaweed glue, and Primal SF-016) were used. In the grouting reinforcement experiment, the mixing ratio of lime and pozzolan was the same, and the additive types were identical to the filling reinforcement experiment. The filling reinforcement experiment showed that there were fewer physical changes such as contraction, with a greater mixing ratio of lime to sand, however, the compressive strength decreased as the mixing ratio increased. With additives, the change in volume of agent decreased and the compressive strength increased, which was especially prominent for jaggery and Primal SF-016. The grouting reinforcement experiment showed that there was a remarkable contraction with an increased amount of moisture that originates from the characteristic of grouting agents that requires flowability. With additives, the water content of the agent decreased, whereas the compressive strength and adhesion increased. Among the additives, Primal SF-016 exhibited the highest compressive strength, and seaweed glue exhibited the most considerable viscosity and adhesion. The study results showed that the characteristics of reinforcement agents vary according to the mixing ratio and additives of the filling and grouting agents. Therefore, it is necessary to selectively apply the mixing ratio and additives for different reinforcement agents considering the wall damage for conservation treatments.

• 접착 및 계면
• /
• 제15권2호
• /
• pp.63-68
• /
• 2014

주형으로 구형의 폴리스티렌을 사용하고 질소와 탄소원으로 시안아미드를 사용하여 열처리 과정을 거친 후 구형의 할로우 메조포러스 질화탄소 물질을 합성하였다. 이때 할로우 메조포러스 질화탄소 물질을 합성하는 과정에서 실리카와 같은 무기물 주형을 사용하지 않기 때문에 이차적인 실리카 제거 공정이 필요 없고 용매를 전혀 사용하지 않는다. 구형의 폴리스티렌 입자는 약 170 nm 크기였고 그리고 할로우 메조포러스 질화탄소 구형입자의 할로우 직경은 약 82 nm, 벽 두께는 약 13 nm이었다. 또한 할로우 메조포러스 질화탄소 물질의 표면적, 나노세공 크기, 세공부피는 각각 $188m^2g^{-1}$, 3.8 nm, $0.35cm^3g^{-1}$이었다. 한편, 할로우 벽은 흑연구조와 유사한 박막층의 쌓임 구조를 가졌으며 이러한 할로우 메조포러스 질화탄소 물질은 연료전지, 촉매, 광촉매, 전자방출 소자 등과 같은 분야에 매우 높은 응용 가능성을 가질 것으로 기대된다.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.596-608
• /
• 1997

The purpose of this study was to compare the apical leakage and adaptation to the dentinal wall of a glass ionomer root canal cement(Ketac-Endo) with those of AH-26 and Tubli-Seal. 102 single-rooted teeth were insrumented with step-back technique and randomly divided into four groups according to kinds of root canal cements: Ketac-Endo, AH-26, Tubli-Seal, and no root canal cement. Four experimental groups were as follows; Group 1 : Filling with gutta-percha and Ketac-Endo Group 2 : Filling with gutta-percha and AH-26 Group 3 : Filling with gutta-percha and Tubli-Seal Group 4 : Filling with gutta-percha without root canal cement All the specimens were obturated with lateral condensation technique, and stored in 100% humidity for 4 days. 20 teeth in each group were placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. And they were evaluated for linear dye leakage using a stereoscope and analyzed by one-way ANOVA. 22 teeth were split longitudinally and evaluated the adaptation to the dentinal wall using scanning electron microscope(4 teeth in each group) and stereoscope(2 teeth in 1, 2, 3 group). The obtained results were as follows ; 1. In case of not used root canal cement(Group 4), there was showed much degree of dye penetration comparerd with used root canal cements (Group 1, 2, 3)(P<0.01). 2. In the case of used root canal cements(Group 1, 2, 3), there was no significant difference in linear leakage in groups(P>0.01). 3. In the case of used root canal cements(Group 1, 2, 3), there was showed intimate adaptation to the dentinal wall independent on kinds of root canal cements. 4. Fractured surfaces indicated failure of cohesion in Ketac-Endo, and failure of adhesion to dentine in AH-26 and Tubli-Seal. 5. According to similar apical leakage and adaptability to the dentinal wall to another root canal cements, it is possible to be used glass-ionomer cement as root canal cement.

• Journal of Chest Surgery
• /
• 제11권1호
• /
• pp.81-84
• /
• 1978

A 15 years Old girl was admitted with chief complaints of intermittent claudication of lower extremity, dizziness, and headache for 5 years. On admission, malignant hypertension was noted in the upper part of body [190-150/120-110] but femoral & dorsalis pedis pulse could not palpate. Once she had experienced C. V. A. due to hypertension of upper part, about years ago. On auscultation, systolic murmur was audible along the left sternal border. E.C.G. Showed left ventricular hypertrophy pattern, and others within normal limit. Retrograde aortography demonstrated diffuse narrowing of entire thoracic aorta with underdeveloped lower abdominal aorta [below the renal artery] & both common lilac artery, and rich collaterals, but normally visualized greater arteries in the aortic arch. On left posterolasteral thoracotomy, entire descending thoracic aorta revealed marked narrowing with mild perivascular adhesion, but no mediastinal pleura adhesion. These findings suggest as congenital type of atypical coarctation in the entire thoracic aorta with mild secondary change. But histopathology was showed the findings of chronic non-specific aortitis, later. Dacron by pass graft was performed with end to side anastomosis between graft and aortic wall. After operation, all her preoperative symptoms & signs were disappeared, and discharged with good general condition.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.153-156
• /
• 2005

Nondestructive sensing of electrospun PYDF web and multi-wall carbon nanotube (MWCNT)/epoxy composites were investigated using electro-micromechanical technique. Electrospinning is a technique used to produce micron to submicron diameter polymeric fibers. Electrospun PVDF web was also evaluated for the sensing properties by micromechanical test and by measurement electrical resistance. CNT composite was especially prepared for high volume contents, 50 vol% of reinforcement. Electrical contact resistivity on humidity sensing was a good indicator for monitoring as for multifunctional applications. Work of adhesion using contact angle measurement was studied to correlate acid-base surface energy between carbon fiber and CNF composites, and will study furher for interfacial adhesion force by micromechanical test.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.1-7
• /
• 2008

생분해성이 있는 polycaprolactone을 사용하여 용액 상태에서 건조시키는 방법으로 마이크로 캡슐을 제조하였다. 심물질로는 화장품 분야에서 중요한 성분으로 쓰이는 retinol을 선택하였으며 안정제로는 poly(vinyl alcohol)을 사용하였다. 제조 조건에 따른 마이크로캡슐의 형태 변화와 물성 변화를 scanning electron microscope와 differential scanning calorimeter를 이용하여 측정하였으며 심물질의 방출 속도에 미치는 영향들을 UV를 이용하여 측정하였다. 사용한 벽재 물질 용액의 농도, 교반속도, 안정제의 농도 등을 변화 시켜 가면서 마이크로캡슐을 제조하여 보았으며, 최적 조건에서 지름이 5~6 um인 구형 모양의 균일한 크기를 갖는 마이크로캡슐들이 형성되었음을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.19-26
• /
• 1994

Sulfonated poly (ethyleneoxide)-grafted polyurethane (PU-PEO-$SO_3$) prepared by bulk modification was coated on a blood sac for electrohydraulic left ventricular assist device (ELVAD) implanted in dogs and its in vivo blood compatibility on shear stress was studied as compared with untreated Po. The effect of the wall shear stress on the protein adsorption unlike platelet adhesion is dependent on the surface characteristics of the material, although less proteins seem to be adsorbed in the region of the high shear stress. The thickness of total proteins adsorbed on PU-PEO-SOJ (400 ${\AA}$) by trans¬mission electron microscopy(TEM) was considerably lower than that of untreated PU(l,000~1,600 ${\AA}$), but PU-PEO-$SO_3$ showed high albumin adsorption, low fibrinogen and IgG adsorption, and low platelet adhesion as compared with untreated PU, suggesting that PU-PEO-$SO_3$ is more in vivo blood compatible. Therefore, it appears that such a blood compatible PU-PEO-$SO_3$ is useful for blood contacting biomaterials including artificial organs.

• 접착 및 계면
• /
• 제13권4호
• /
• pp.151-155
• /
• 2012

본 연구에서는 중공형 나노 입자의 구조체가 되는 구형 폴리스티렌을 조절된 유화중합법으로 여러 크기의 구형 폴리스티렌을 제조하는 연구를 수행하였다. 유화중합에 사용되는 유화제의 농도를 조절하여 구형 폴리스티렌의 크기를 임의로 조절하였다. 이 폴리스티렌을 구조체로 이용하여 중공형 중간세공 실리카를 합성하였으며, 합성 과정 시 반응속도의 조절을 위해 에탄올을 넣어 실리카 전구체의 가수분해 속도를 조절하고, 실리카 전구체의 투여량을 조절하여 중공형 중간세공 실리카의 벽 두께를 조절하였다.

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.873-893
• /
• 1999

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue and repair of function. For more than a decade there have been many efforts to develop materials and bioactive molecule(such as growth factor and differentiation factors) to promote periodontal wound healing. Among the bioactive molecules, bone morphogenetic protein(BMP) was studied for periodontal wound healing. Since Urist demonstrated that demineralized bone matrix could induce the formation of cartilage and bone in ectopic site, many studies on BMP have been reported. Among those BMPs, it was reported that rhBMP-2 enhanced the healing of bone defects in animal studies and clinical studies. However, its efficacy in periodontal regeneration, especially 1-wall intrabony defects is still unknown. The purpose of this study was to examine the effect of rhBMP-2/ACS on the epithelial migration, gingival connective tissue adhesion, cementum formation, alveolar bone regeneration in intrabony defects of dogs. Four millimeter deep and four millimeter wide 1-wall defects were surgically created in the mesial aspects of the 3rd incisors. The test group received rhBMP-2/ACS with a flap procedure and the control underwent buffer/ACS with a flap procedure. Histologic analysis after 8 weeks of healing revealed the following results: 1. The length of epithelial growth(the distance from alveolar crest to the apical end of JE) was $0.9{\pm}1.5mm$ in the control group and $1.2{\pm}1.4mm$ in the test group. There was no statistically significant difference between the two groups. 2. The length of connective tissue adhesion was $2.4{\pm}1.3mm$ in the control group and $1.2{\pm}1.1mm$ in the test group. The control group showed significantly enhanced adhesion(P<0.05). 3. The length of new cementum was $0.9{\pm}1.0mm$ in the control group and $1.7{\pm}0.8mm$ in the test group. The test group showed significantly enhanced cementum regeneration(P<0.05). 4. The length of new bone height was $1.9{\pm}0.6mm$ in the control group and $2.4{\pm}0.9mm$ in the test group. There was no statistically significant difference between the two groups. 5. The new bone area was $4.7{\pm}1.7mm^2$ in the control group and $8.0{\pm}2.0mm^2$ in the test group. The test group showed significantly enhanced bone formed area(P<0.05). 6. The new bone density was $73.0{\pm}8.6%$ in the control group and $66.6{\pm}15.3%$ in the test group. There was no statistically significant difference between the two groups. These results suggest that the use of rhBMP-2 in 1-wall intrabony defects has significant effect on new cementum and new bone formation area, but doesn't have any significant effect on the prevention of junctional epithelium migration and new bone formation height.

• 접착 및 계면
• /
• 제10권4호
• /
• pp.191-198
• /
• 2009

지방족 에폭시 수지인 glycerol diglycidyl ether (GDE)에 단관능성 아크릴 수지인 2-carboxyethyl acrylate (2-CEA) 또는 2-hydroxyethyl acrylate (2-HEA)를 반응시켜 지방족 에폭시 아크릴레이트를 제조하였다. FT-IR, $^1H$-NMR, 그리고 $^{13}C$-NMR를 사용하여 생성물을 확인하였고, 수율은 prep-LC를 사용하여 얻었다. 생성물의 자외선 경화거동은 photo-DSC를 사용하였고, 열경화 반응성은 DSC를 사용하여 얻었다. 2-CEA의 반응성이 2-HEA보다 월등히 높음을 알 수 있었고, 2-CEA로부터 제조한 지방족 에폭시 아크릴레이트(GEA-C)의 수율은 약 83%이었다. 촉매를 제거한 GEA-C 생성물의 자외선 경화반응($T_{max}$)은 약 10 s로 빠르게 진행되었다. GEA-C는 투명하고, 내열성이 우수하며 저점도를 갖고 있음을 확인할 수 있었다. ${\Delta}E^*$는 2.51, 점도는 192 cps, 5% 중량감소 때의 온도는 $299^{\circ}C$이었다. Kissinger와 Ozawa-Flynn-Wall 식으로 얻은 GEA-C의 열경화 반응의 활성화에너지($E_a$)는 91~92 kJ/mol이었다.