This study describes the effects of a thrust labyrinth seal applied to the backside of a centrifugal impeller on the axial thrust force for high speed turbomachinery. The bulk flow model using Neumann's equation calculates the seal cavity pressures and leakage flow rate of the thrust labyrinth seal based on three configurations: teeth-on-rotor (TOR), teeth-on-stator (TOS), and interlocking labyrinth seal (ILS). Prediction results show that the ILS is superior to the TOR and TOS in terms of leakage flow rate. A mathematical model of a centrifugal impeller with a thrust labyrinth seal on its backside calculates the force components corresponding to the impeller inlet, shroud, impeller backside outer, backside seal, and backside inner pressures. A summation of the force components renders the total axial thrust force acting on the centrifugal impeller. The Newton-Raphson numerical scheme iteratively calculates the pressures and leakage flow rate through the impeller wall gap. The prediction results reveal that the leakage flow rate and total axial thrust force increase with rotor speed, and the ILS significantly decreases the leakage flow rate, whereas it slightly increases the axial thrust force when compared to TOR and TOS. Increasing the seal clearance causes an increase in the leakage flow rate and a slight decrease in the axial thrust force with the ILS.
The C-shaped canal system is an anatomical variation mostly seen in mandibular second molars, although it can also occur in maxillary and other mandibular molars. The main anatomical feature of C-shaped canals is the presence of fins or web connecting the individual root canals. The complexity of C-shaped canals prevents these canals from being cleaned, shaped, and obturated effectively during root canal therapy, and sometimes it leads to an iatrogenic perforation from the extravagant preparation. The purpose of this study was to provide further knowledge of the anatomical configuration and the minimal thickness of dentinal wall according to the level of the root. Thirty extracted mandibular second molars with fused roots and longitudinal grooves on lingual or buccal surface of the root were collected from a native Korean population. The photo images and radiographs from buccal, lingual, apical direction were taken. After access cavity was prepared, teeth were placed in 5.25% sodium hypochlorite solution for 2 hours to dissolve the organic tissue of the root surface and from the root canal system. After bench dried and all the teeth were embedded in a self-curing resin. Each block was sectioned using a microtome (Accutom-50, Struers, Denmark) at interval of 1 mm. The sectioned surface photograph was taken using a digital camera (Coolpix 995, Nikon, Japan) connected to the microscope. 197 images were evaluated for canal configurations and the minimal thickness of dentinal wall between canal and external wall using 'Root Thickness Gauge Program' designed with Visual Basic. The results were as follows : 1. At the orifice level of all teeth, the most frequent observed configuration was Melton's Type C I (73%), however the patterns were changed to type C II and C III when the sections were observed at the apical third. On the other hand, the type C III was observed at the orifice level of only 2 teeth but this type could be seen at apical region of the rest of the teeth. 2. The C-shaped canal showed continuous and semi-colon shape at the orifice level, but at the apical portion of the canal there was high possibility of having 2 or 3 canals 3. Lingual wall was thinner than buccal wall at coronal, middle, apical thirds of root but there was no statistical differences.
Kim, Yoon Soo;Singh, Adya P.;Wong, Andrew H.H.;Eom, Tae-Jin;Lee, Kwang Ho
Journal of the Korean Wood Science and Technology
/
v.34
no.2
/
pp.68-77
/
2006
The heartwood of cengal (Neobalanocarpus heimii) is known to have a high degree of decay resistance by virtue of its high extractive content. After 30 years in ground contact an utility pole of this tropical hardwood was found to be degraded only in the surface layers by cavity-forming soft rot fungi. The present work was undertaken 1) to characterize the degradation of cengal heartwood from the aspect of ultrastructure and chemistry and 2) to investigate the correlation between soft rot decay and its extractive microdistribution in wood tissues. The chemical analysis of cengal heartwood revealed the presence of a high amount of extractives as well as lignin. The wood contained a relatively high amount of condensed lignin and the guaiacyl units. Microscopic observations revealed that vessels, fibers and parenchyma cells (both ray and axial parenchyma) all contained extractives in their lumina, but in variable amounts. The lumina of fibers and most axial parenchyma were completely or almost completely filled with the extractives. TEM micrographs showed that cell walls were also impregnated with extractives and that pit membranes connecting parenchyma cells were well coated and impregnated with extractives. However, fungal hyphae were present in the extractive masses localized in cell lumina, and indications were that the extractives did not completely inhibit fungal growth. The extent of cell wall degradation varied with tissue types. The fibers appeared to be more susceptible to decay than vessels and parenchyma. Middle lamella was the only cell wall region which remained intact in all cell types which were severely degraded. The microscopic observations suggested a close correlation between extractive microdistribution and the pattern and extent of cell wall degradation. In addition to the toxicity to fungi, the physical constraint of the extractive material present in cengal heartwood cells is likely to have a profound effect on the growth and path of invasion of colonizing fungi, thus conferring protection to wood by restricting fungal entry into cell walls. The presence of relatively high amount of condensed lignin is also likely to be a factor in the resistance of cengal heartwood to soft rot decay.
Park, In-Cheon;Lee, Chang-Seop;Lee, Nan-Young;Lee, Sang-Ho
Journal of the korean academy of Pediatric Dentistry
/
v.30
no.2
/
pp.272-285
/
2003
This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).
This study was designed to investigate the number of the growing and mature follicles following gonadotrophin treatments for superovulation in mature rats. Eighteen mature rats (Sprague-Duwely, initially 190~230gm) were randomly alloted into 3 groups. One group was control group, another FSH-treated group was injected intramuscularly with 0.5 units of follicular stimulating hormone (FSH) / rat, and third PMS and HCG-treated group was intramuscularly injected with 20~25IU of pregnant mare serum (PMS) / rat and then at the 48 hrs later, with 20~25IU of human chorionic gonadotrophin (HCG) / rat. The uteri and ovaries of rats were collected and then were observed grossly and serial sections of paraffin embedding ovaries were stained with H-E. Number of ovarian follicles by following 3 grades of large, middle and small follicles from secondary and tertiary follicles were investigated by LM photography of preparations. Small follicles were classified as secondary follicles of preantral follicles with more than 2 layers of granulosa cells surrounding the oocyte and middle follicles were classified as secondary follicles with early signs of antral cavity or with more than one small cavity on either side of the oocytes and large follicles were classified as tertiary follicles with a single medium sized antral cavity or large well-formed antral cavity. In gross findings, the uteri were slightly swelling in FSH-treated group and markedly swelling or filled with fluid in the uterine lumen in PMS and HCG-treated group. In histological findings, the shape and size of the follicles were diverse in middle and large follicles of FSH-treated group and PMS and HCG-treated group, and proportion of atretic follicles was increased in FSH-treated group and PMS and HCG-treated group than those in control group. The uteri of FSH-treated group and PMS and HCG-treated group were hypertropied or filled with fluid in the lumens and walls of uteri. The wall tissue layers were flattened and their blood and lymph vessels were dilated. The mean number of follicle per ovary in control group were appeared to be $17.1{\pm}5.6$($14.0%{\pm}4.6%$), $37.8{\pm}9.1$($30.9{\pm}7.4%$) and $67.6{\pm}30.1$($55.2{\pm}24.6%$) respectively at large, middle and small follicles and total number of these 3 grade follicles were appeared to be $122.5{\pm}40.0$. The mean number of follicle per ovary in FSH-treated group were appeared to be $22.8{\pm}7.0$($17.4%{\pm}5.3%$), $43.4{\pm}6.6$($33.2{\pm}5.1%$) and $64.5{\pm}13.0$($49.3{\pm}9.9%$) respectively at large, middle and small follicles and total number of these 3 grade follicles were appeared to be $130.7{\pm}16.6$. The mean number of follicle per ovary in PMS and HCG-treated group were appeared to be $29.7{\pm}11.0$($16.3%{\pm}6.0%$), $61.9{\pm}17.2$($33.9{\pm}9.4%$) and $91.1{\pm}28.2$($49.9{\pm}15.4%$) respectively at large, middle and small follicles and total number of these 3 grade follicles were appeared to be $182.6{\pm}32.7$. The above findings reveal that large follicles were increased 29.8% in FSH-treated group and 73.7% in PMS and HCG-treated group than those in control group and in histologic findings, proportion of atretic follicles were more increased in ovaries with more number of more developing follicles.
Journal of the korean academy of Pediatric Dentistry
/
v.30
no.3
/
pp.406-414
/
2003
Chemomechanical approach to caries removal was introduced in order to preserve the maximum amount of sound tooth structure. The efficacy of chemomechanical caries removal was assessed using microcomputed tomography which offers 3 dimensional data without destroying the tooth, and the V works program. In group 1, the density values of the sound dentin, carious dentin, and remaining dentin after chemomechanical treatment were analyzed. In group 2, the density values of the sound dentin, cavity wall prepared using high speed bur, and the remaining dentin after additional $Carisolv^{TM}$ gel application on the same cavity were analyzed. The results were as follows; 1. The density value of the remaining dentin after the $Carisolv^{TM}$ treatment was 81.8% of the sound dentin(p < 0.001). 2. The density value of the remaining dentin after the conventional rotary instrument showed no statistically significant difference from that of the sound dentin(p = 0.234).
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.14
no.2
/
pp.24-29
/
2015
In this paper, a microstrip antenna with isoflux radiation patterns is presented for Low Earth Orbit(LEO) medium-sized satellites. Because of making isoflux patterns, the ground of proposed antenna under the patch was transform into a trapezoid for adjusting fringing field between the patch and ground. Next, the cavity walls were located at end of the ground for reducing back radiation. The proposed antenna was designed to receive S-band uplink(2.025 ~ 2.110 GHz) and the dimensions of the designed antenna with the ground are $160mm{\times}160mm{\times}40mm$ ($1.1{\lambda}{\times}1.1{\lambda}{\times}0.3{\lambda}$, ${\lambda}$ is the free-space wavelength at 2.068 GHz). Measured -10 dB bandwidth was 90 MHz(4.4 %) and it covers the required system bandwidth. Also, measured 3 dB axial ratio was 18 MHz(0.9 %). On the other hand, measured radiation patterns were isoflux patterns and its measured gain was 5.31 dBi at E-plane $46^{\circ}$ in the y-axis pol.
The objective of this study is applied to office buildings to evaluate quantitative evaluation method about performance of double-skin at design stage to establish the basis for the purpose of evaluation performance. Select the evaluation building about design plan for applying the double-skin using the dynamic heat load analysis program the annual heating and cooling load of before and after the double-skin. Using CFD to analyze wind factor and applied ventilation for realistic results. Effects of double-skin to apply, and control techniques that can be done more realistically proposed through to set and control for shade control mode of ventilator and inside cavity wall of double-skin. Apply for the building the double-skin due to interpretation of the annual heating and cooling loads applied to interpret the quantitative effect confirmed the possibility. According to the form of a double skin was confirmed cavity environmental changes.
This study was designed to investigate the number of the growing and mature follicles in each stage of estrus cycle in mature rats. Eighteen mature rats(Sprague-Dawley, initially 190~230gm) were randomly alloted into 4 groups(proestrus, estrus, metestrus, and diestrus) according to estrus cycles. The uteri and ovaries of rats were collected and then alternative sections of paraffin embedding ovaries were stained with H-E. Numbers of large, middle and small follicles or only large and middle follicles from secondary and tertiary follicles were investigated by LM photography of preparations. Small follicles were defined as secondary follicles with 2~5 cell layers of granulosa cells surrounding the oocyte, and middle follicles were defined as secondary follicles with more than 5 cell layers or with early signs of antral cavity or with more than one small cleft on either side of the oocytes and large follicles were defined as tertiary follicles with a single medium or large antral cavity. The number of follicles in a pair ovary per rat was appeared to be ranged from 207 to 370 and the mean number of these follicles was $270.4{\pm}52.6$ and the mean number of follicles per ovary was $134.9{\pm}32.0$. The mean number of large, middle and small follicles per ovary was appeared to be $16.4{\pm}4.4$($12.2{\pm}3.3%$), $36.2{\pm}8.6$($26.8{\pm}6.4%$), and $82.7{\pm}24.0$($61.3{\pm}17.8%$), respectively. The mean number of large and middle follicles in each stage group of estrus cycle was appeared to be $17.8{\pm}2.1$ and $38.3{\pm}7.4$ at proestrus stage group, $15.7{\pm}5.2$ and $38.0{\pm}10.0$ at estrus stage group, $16.5{\pm}3.5$ and $33.8{\pm}7.0$ at metestrus stage group, $16.7{\pm}5.8$ and $29.7{\pm}5.5$ at diestrus group, respectively. In histological findings of large follicles during each estrus cycle, the large follicles in proestrus group contain single small antrum, thick granulosa cell layers, and were $300{\sim}500{\mu}m$ in diameter and were growing follicles with PCNA-positive cells in the granulosa cell layers, and other luteinizing follicles of proestrus cycle stage were decreased in size and were thicker in wall thickness and more luteinized than those in metestrus and diestrus stage groups. The large follicles in estrus stage group contain thick granulosa cell layers and nonprominent cumulus-oocyte complexes in antrum, and were $400{\sim}700{\mu}m$ in diameter and were growing follicles with PCNA-positive cells in the granulosa cell layers. The large follicles in metestrus and diestrus stage groups contain enlarged antrums, thinner layers of walls and prominent cumulus-oocyte complexes, and were $700-950{\mu}m$ in diameter, and were nongrowing follicles without PCNA-positive cells or another large follicles contain cells with dark stainability and distinct boundary.
Kim, Young-Jo;Lee, Dong-Keun;Um, In-Woong;Min, Seung-Ki;Chung, Chang-Joo;Kim, Eun-Cheol
Maxillofacial Plastic and Reconstructive Surgery
/
v.16
no.2
/
pp.186-195
/
1994
Fibromatosis is benign fibroblastic proliferative lesion with abundant collagenous neo-formation located principally in the abdominal wall and in the upper and lower extremities (Masson & Soule, 1966). Wilkins and Waldron, in 1975, suggested that the title aggressive fibromatosis was a more appropriate term, reflecting the invasive characteristics of the disease. Synonyms listed were extra-abdominal desmoid, juvenile fibromatosis, aggressive infantile fibromatosis and congenital fibrosarcoma. A total of 12% of all fibromatosis arise in head and neck. Fibromatosis of the oral cavity is uncommon and is even more rare when in involve the mandibule. It is a locally aggressive fibrous tissue tumor, generally does not metastasize, but may cause considerable morbility and even death due to local infiltration. The degree of microscopic cellularity is variable, not only from tumor to tumor but also from area to area in the same tumor. Some tumors present with proliferation of mature fibroblasts and a dominating collagenous component : others may show a lack of the tumor in both types. The common histologic denominator appears to be cellular interlacing bundles of elongated fibroblasts, showing little or no mitotic activity and no pleomorphism. Mitosis are not a consistent index of malignancy when found in younger age groups. Fibromatosis still posses difficult problems of diagnosis and treatment. It is frequently recurrent and infliltrates neighbouring tissues. These lesion infliltrate widely and replace muscle, fat, and even bone with fibrous tissue of varying cellularity. Lesion representing fibromatosis in the oral cavity must be carefully evaulated by both surgeon and pathologists to ensure proper diagnosis and treatment planning. When these lesions involve bone, surgeon must be aware of the lesion's potential to perforate the cortex and expand while remaining hidden from the surgeon's view. Careful and precise clinical correlation with histologic appearance is essential to preclude misdiagnosis of fibrosarcoma yet provide surgical treatment plan that provides adequate local excision and long-term follow up. As regards cause, little is known. It is attributed to trauma or alteration in the sex hormone(Carlos, et al, 1986). Clinially, the lesion is reported to be not painful in most cases, but capable of rapid growth. The treatment is essentially surgical excision with wide margin of adjacent uninvolved tissue. Radiotherapy, hormone treatment or chemotherapy are of no use (WIkins et al, 1975 ; Majumudar and Winiarkl, 1978). We report a case of aggressive fibromatosis of 15-year-old with a lesion in the soft tissue of the parotid area that invaded the underlying bone of the mandibular body.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.