• 한국전문물리치료학회지
• /
• 제13권3호
• /
• pp.67-74
• /
• 2006

The purpose of this study was to investigate the effects of walking aid on hemiplegic gait of chronic stroke patients. Twelve stroke patients participated in this study. Physiological cost index (PCI), gait speed, and climbing stairs with and without walking aid were measured and analyzed. The results showed that walking with walking aid significantly improved gait speed and reduced physiological cost index and time needed to climb stair (height 7 cm) in comparison with a walking without walking aid. In conclusion, walking aid may improve the speed and efficiency of hemiplegic gait in chronic stroke patients.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.725-730
• /
• 2004

This paper has regarded mechanism design of cane-like passive type walking aid for the elderly using 3-RPS parallel manipulator. First, gait patterns of the elderly have been experimented. By means of motion capturing and image processing, we decided loaded forces and places of the cane when the elderly walked with a cane. Using these results we have developed a passive type walking aid. Second, the walking pattern has been simulated using dynamic analysis program, ADAMS and we find out the similarity between the real walking and the simulated walking. Finally after assuring the similarity, with adjusting the new mechanism design to the simulated walking we will decide whether the walking aid is safe and stable when the elderly walks with this cane-like walking aid. This paper will be basis for the development of the mechanism design applying 3-RPS parallel manipulator.

• 대한물리의학회지
• /
• 제10권3호
• /
• pp.73-79
• /
• 2015

PURPOSE: This study aims to examine the impact of the location of a walker-aid pocket that is attached to the walker while walking. METHODS: The research subjects included 10 male adults and 10 elderly people. The subjects used a two-wheeled walker for the walking analysis, and a firm velcro-type pocket that can be attached to the walker aid was used for weight loading. The size of the external loads was set at 2kg, which corresponds to approximately 2.5% of the mean body weight of the subjects. The pocket was attached to the left, center, and right sides of the walker aid. Stride length, stride, step width, and time were investigated according to the location change. RESULTS: No statistical differences were observed in all the walking factors among the adults and elderly people regardless of the changes in the location of the walker pocket. In cases of no weight and the 2kg walker pocket, stride length and strides were longer for the adults, while the step width was greater and walking time was longer for the elderly people. CONCLUSION: The weight of the walker pocket turn out to retard walking speed, although the location of the walker pocket is not affect walking with the walker-aid.

• 한국지능시스템학회논문지
• /
• 제18권5호
• /
• pp.692-699
• /
• 2008

본 논문은 보행보조기 사용자의 사용자 의지 파악을 통해 보행보조기의 최적 구동 방법을 제시하고자 한다. 최근에 노인인구의 증가로 인해 노인 및 장애인을 위한 보행 보조기에 대한 관심이 증가되고 있다. 그러나 대부분의 경우 동력이 없는 시스템으로써 경사 등의 공간에서 취약성을 가지고 있다. 이에 동력형 보행보조기에 대한 관심이 증가되고 있으나, 대부분의 경우 보행보조기 조종이 여의치 않다. 이에 본 논문에서는 사용자의 보행 의지를 파악할 수 있는 시스템을 도입하고 이를 기초로 보행자의 안정적인 구동을 수행할 수 있도록 퍼지 기반의 알고리즘을 적용한다. 먼저 사용자의 의지력은 FSR 센서를 이용하여 파악하고, 이를 기초로 사용자가 이동하고자 하는 이동 방향과 이동속도에 대해 퍼지 알고리즘을 적용하였다. 퍼지알고리즘으로부터 나온 데이터를 기초로 보행보조기의 차량 속도와 방향에 대해 구동 바퀴의 차동 구동을 통해 사용자의 의지에 맞춰 구동할 수 있도록 하였다. 이를 통해 사용자의 이동하려는 의지에 대해 안정적으로 차량을 이동시킬 수 있도록 최적의 보행 시스템을 구축하였다. 이 모든 과정을 실험을 통해 검증하였다.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.371-376
• /
• 2022

The purpose of this study is to develop a walking assistance system with mobility support and life support functions so that the elderly with reduced physical ability and patients who are uncomfortable when moving can move comfortably indoors and outdoors, and help social life. An obstacle recognition sensor module that can be applied indoors and outdoors is installed on a lightweight walking aid. The purpose of this study is to develop a walking assistance system with mobility support and life support functions so that the elderly with reduced physical ability and patients who are uncomfortable when moving can move comfortably indoors and outdoors, and help social life. An obstacle recognition sensor module that can be applied indoors and outdoors is installed on a lightweight walking aid. It is a system structure of an integrated actuator and brake system that can avoid obstacles in consideration of the safety of the elderly and is easy to install on the device. In this paper, the design of a lightweight walking aid was designed to increase the convenience of the socially disadvantaged and the elderly with reduced exercise ability. In addition, in order to overcome the disadvantage of being inconvenient to use indoors due to the noise and vibration of the motor during operation, an In-Wheel type motor is applied to develop and apply a low noise, low vibration and high efficiency drive system.

• 한국지능시스템학회논문지
• /
• 제21권1호
• /
• pp.42-48
• /
• 2011

본 논문은 비평탄 지형에서 능동형 보행보조기를 구동하고자 할 때, 바닥 지형에 의해 발생하는 보행의지 센서의 영향을 줄이기 위한 논문이다. 최근 보행보조기에 대한 관심이 증가되고 있으며, 외부 경사지형, 둔턱, 계단 등의 비평탄 지형에서도 안정적으로 차량을 이동시킬 수 있도록 고안된 능동형 보행보조기에 대한 연구가 진행되고 있다. 이러한 실외에서 사용되는 능동형 보행보조기에 있어 진동해석 및 비평탄 지형을 이동하면서 발생하는 기계적 충격을 줄일 수 있는 알고리즘의 개발은 능동형 보행보조기에 있어 해결해야 할 문제 중 하나이다. 이에 본 논문에서는 비평탄 지형에서의 진동을 해석할 수 있도록 가속도 센서를 적용하였으며, 둔턱을 넘을 때 발생하는 진동에 의해 보행의지 센서에 가해지는 진동에 의한 충격을 감쇠시킬 수 있는 알고리즘을 제안하였으며, 이를 실험을 통해 검증하였다.

• 한국전문물리치료학회지
• /
• 제12권1호
• /
• pp.54-62
• /
• 2005

The purpose of this study was to find the effects of using aid in enhancing walking ability inpatients with spinal cord injury who have received rehabilitative care. The study population consisted of 24 spinal cord injury patients referred to the Department of Rehabilitation Medicine in the National Rehabilitation Center (NRC). All subjects were ambulatory with or without an assistive devices. All of the participants were assessed on SCIM II, WISCI II, FIM, MBI, gait speed (m/s), and walking endurance (120 min/m). The data were analyzed using a paired t-test, a one-way ANOVA, and a Duncan test. The results revealed that TSCIM II and all of the items of SCIM II of the cervical ASIA D group patients were higher than those of the Thoracic ASIA A and C group patients (p<.05). The FIM, MBI, and WISCI II of the cervical ASIA D group patients were higher than those of the Thoracic ASIA C group patients (p>.05). The walking velocities of the lumbar ASIA C group patients were higher than those of Thoracic ASIA A group patients (p<.05). The walking endurance of the lumbar ASIA C group patients was higher than that of the thoracic ASIA C group patients (p<.05). The ASIA D group patients used bilateral standard canes or crutches, but none used AFO. The ASIA A and C group patients used bilateral standard walkers with KAFO for standing and walking. The findings suggest that injury level as well as the functionality of walking aids should be considered when formulating a rehabilitative plan for patients with spinal cord injury.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.32.2-32
• /
• 2001

We have developed the power assistive leg called HAL (Hybrid Assistive Leg) which provide the walking aid for walking disorder persons or aged persons without nursing person. We developed HAL-3 by considering some problems of HAL-1,2 which had developed previously. The mechanism of HAL-3 actuator could be simplified and sophisticated by using the harmonic drive. As the control signal of HAL-3 EMG signal was used. We proposed a calibration method to identify parameters which relates the EMG to joint torque by using HAL-3. We could obtain suitable torque estimated by EMG and realize power assist in walking according to the intention of the operator To the remove discomfort for quick motion power assist, the feedforward controller was installed at the beginning of motion ...

• 로봇학회논문지
• /
• 제11권2호
• /
• pp.108-114
• /
• 2016

This paper presents a sensor-based cane mechanism for walking aid of the visually impaired person. We also describe an approach to decide properly the length of the specified cane mechanism. The cane mechanism has some sensors to identify the possibility of a collision between the cane user and an object and/or a person, and a signal processing unit that enables the user to recognize such a collision is attached in the mechanism. Thus, the walker using this cane can recognize in advance the possibility of such a collision in his walking process. Consequently, it is helpful for the visually impaired person to walk on a pedestrian road safely. The feature of the proposed cane mechanism and its availability have been shown through experimental works in a typical walking environment.

• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.162-169
• /
• 2010

This paper deals with the recognition algorithm of walking will based on torque estimation. Recently, concern about walking assistant aids is increasing according to the increase in population of elder and handicapped person. However, most of walking aids don't have any actuators for its movement. So, general walking aids have weakness for its movement to upward/download direction of slope. To overcome the weakness of the general walking aids, many researches for active type walking aids are being progressed. Unfortunately it is difficult to control aids during its movement, because it is not easy to recognize user's walking will. Many kinds of methods are proposed to recognize of user's walking will. In this paper, we propose walking will recognition algorithm by using torque estimation from wheels. First, we measure wheel velocity and voltage at the walking aids. From these data, external forces are extracted. And then walking will that is included by walking velocity and direction is estimated. Here, all the processes are verified by simulation and experiment in the real world.