• 소성∙가공
• /
• 제15권1호
• /
• pp.3-8
• /
• 2006

The demand fer small and high-capacity optical data storage devices has rapidly increased. The areal density of optical disk is increased by using higher numerical aperture objective lens and shorter wavelength source. A wafer-scale stacked micro objective lens with a numerical aperture of 0.85 and a focal length of 0.467mm for the 405nm blue- violet laser was designed and fabricated. A diffractive optical element (DOE) was used to compensate the spherical aberration of the objective lens. Among the various fabrication methods for micro DOE, the UV-replication process is more suitable fur mass-production. In this study, an 8-stepped DOE pattern as a master was fabricated by photolithography and reactive ion etching process. A flexible mold was fabricated for improving the releasing properties and shape accuracy in UV-replication process. In the replication process, the effects of exposing time and applied pressure on the replication quality were analyzed. Finally, the surface profiles of master, mold and molded pattern were measured by optical scanning profiler. The geometrical deviation between the master and the molded DOE was less than $0.1{\mu}m$. The diffraction efficiency of the molded DOE was measured by DOE efficiency measurement system which consists of laser source, sample holder, aperture and optical power meter, and the measured value was $84.5\%$.

• 전자공학회논문지A
• /
• 제29A권1호
• /
• pp.33-40
• /
• 1992

4인치(100) 실리콘 기판상에 센서용 다이아프램을 제조할 때 생기는 식각 현상들을 관찰하고 분석하였다. 115$^{\circ}C$의 "F etch' 용액을 사용하여 300$\mu$ 이상의 깊은 식각을 행하였을 때 식각 표면에 발생하느 식각 결함은 hillock, 반응 생성물, 그리고 횐색 잔유물로 구분될 수 있었따. 특히 hillock의 경우 식각 표면에 부착된 반응 생성물의 밀도나 크기에 관계하여 |111|면들로 이루어질는 피라밋 구조나 사다리꼴 육면체등의 형태를 취함이 확인되었다. 또한 용해된 실리콘의 국부적인 과잉 포활 발생하는 흰색 잔유물의 IR 흡수 스펙트럼을 조사한 결과, Si-N-O 성분에 미량의 h와 C가 포함된 것임을 알 수 있었다. 아울러 식각면을 식각용액에 대해 아래쪽, 위쪽, 그리고 측면을 향하도록 놓았을때 식각 결함의 존재 확률과 분포 그리고 식각율의 분포를 비교한 결과 식각율의 균일성면에서는 하측방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가 유리하게 나타났으며 이를 반응조내의 흐름 패턴을 이용하여 해석하였다.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.27-31
• /
• 2015

고성능 소자의 전력밀도가 증가함에 따라 소자의 열 관리는 주요 핵심 기술로 부각되었고, 기존의 heat sink나 TIM(thermal interface material)으로는 소자의 열 문제를 해결하는데 한계가 있다. 이에 최근에는 열 유속(heat flux)을 증가시키고자 액체 냉각 시스템에 관한 연구가 활발히 진행되고 있으며, 본 연구에서는 TSV(through Si via)와 microchannel을 이용하여 칩 레벨 액체 냉각 시스템을 제작하고 시스템의 냉각 특성을 분석하였다. TSV와 microchannel은 Si 웨이퍼에 DRIE(deep reactive ion etching)을 이용하여 공정하였고, 3가지 다른 형상의 TSV를 제작하여 TSV 형상이 냉각 효율에 미치는 영향을 분석하였다. TSV와 microchannel 내 액체흐름 형상은 형광현미경으로 관찰하였고, 액체 냉각에 대한 효율은 실온에서 $300^{\circ}C$까지 시편을 가열하면서 적외선현미경을 이용하여 온도를 측정 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.388-388
• /
• 2010

In this study, Ferroelectric vinylidene fluoride-trifluoroethylene (VF2-TrFE) copolymer films were directly deposited on degenerated Si (n+, $0.002\;{\Omega}{\cdot}cm$) using by spin coating method. A 1~5 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene (VF2:TrFE = 70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers at a spin rate of 2000 ~ 4000 rpm for 2 ~ 30 seconds. After annealing in a vacuum ambient at 100 ~ $200^{\circ}C$ for 60 min, upper aluminum electrodes were deposited by vacuum evaporation for electrical measurement. X-ray diffraction results showed that the VF2-TrFE films on Si substrates had $\beta$-phase of copolymer structures. The capacitance on highly doped Si wafer showed hysteresis behavior like a butterfly shape and this result indicates clearly that the copolymer films have ferroelectric properties. The typical measured remnant polarization ($P_r$) and coercive filed ($E_c$) values were about $5.7\;{\mu}C/cm^2$ and 710 kV/em, respectively, in an applied electric field of ${\pm}$ 1.5 MV/em. The gate leakage current densities measured at room temperature was less than $7{\times}10^{-7}\; A/cm^2$ under a field of 1 MV/cm.

• 융합정보논문지
• /
• 제10권6호
• /
• pp.28-34
• /
• 2020

본 논문에서는 VCSEL (Vertical Cavity Surface Emitting Laser) 레이저를 만드는 구조와 유사한 GaAs 웨이퍼상에 MOCVD (Metal Organic Chemical Vapor Deposition) 장비로 GaAs와 AlGaAs 에피층을 형성시킨 구조를 사용한다. 3차원 공진현상에 의해 자연 발생되는 광양자테 (PQR: Photonic Quantum Ring) 소자를 건식 식각 방법인 CAIBE (Chemically Assisted Ion Beam Etching) 기술로 제작하였지만, 진공 분위기에서 진행해야 하는 문제점 때문에 저가격으로 쉽게 소자를 제작할 수 있는 방법이 연구되었고, 그 결과 인산, 과산화수소, 메탄올이 혼합된 용액의 습식식각 기술로 가능성을 확인하였으며, 이 방법을 적용하여 소자를 제작한 내용에 대해 논한다. 또한, 제작된 광소자의 스펙트럼을 측정하였고, 이 결과들을 이론적으로 해석하여 얻은 파장값과 비교한다. 광양자테 소자는 3차원 형상으로 세포를 모델링하거나, 디스플레이 분야로의 응용이 가능할 것으로 기대한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.79-79
• /
• 1999

The varous techniques for fabrication of si or metal tip as a field emission electron source have been reported due to great potential capabilities of flat panel display application. In this report, 240nm thermal oxide was initially grown at the p-type (100) (5-25 ohm-cm) 4 inch Si wafer and 310nm Si3N4 thin layer was deposited using low pressure chemical vapor deposition technique(LPCVD). The 2 micron size dot array was photolithographically patterned. The KOH anisotropic etching of the silicon substrate was utilized to provide V-groove formation. After formation of the V-groove shape, dry oxidation at 100$0^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have a etch-mask for dry etching. The thicknesses of the grown oxides on the (111) surface and on the (100) etch stop surface were found to be ~330nm and ~90nm, respectively. The reactive ion etching by 100 watt, 9 mtorr, 40 sccm Cl2 feed gas using inductively coupled plasma (ICP) system was performed in order to etch ~90nm SiO layer on the bottom of the etch stop and to etch the Si layer on the bottom. The 300 watt RF power was connected to the substrate in order to supply ~(-500)eV. The negative ion energy would enhance the directional anisotropic etching of the Cl2 RIE. After etching, remaining thickness of the oxide on the (111) was measured to be ~130nm by scanning electron microscopy.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.88-93
• /
• 1994

We fabricated a large-scale photovoltaic device for detecting-3-5$\mu$m IR, by forming of n$^{+}$-p junction in the $Hg_{1-x}Cd_{x}$Te (MCT) layer which was grown by LPE on CdTe substrate. The composition x of the MCT epitaxial layer was 0.295 and the hole concentration was 1.3${\times}10^{13}/cm^{4}$. The n$^{+}$-p junction was formed by B+ implantation at 100 keV with a does 3${\times}10^{11}/cm^{2}. The n$^{+}$ region has a circular shape with 2.68mm diameter. The vacuum-evaporated ZnS with resistivity of 2${\times}10^{4}{\Omega}$cm is used as an insulating layer over the epitaxial layer. ZnS plays the role of the anti-reflection coating transmitting more than 90% of 3~5$\mu$m IR. For ohmic contacts, gole was used for p-MCT and indium was used for n$^{+}$-MCT. The fabrication took 5 photolithographic masks and all the processing temperatures of the MCT wafer were below 90$^{\circ}C$. The R,A of the fabricated devices was 7500${\Omega}cm^{2}$. The carrier lifetime of the devices was estimated 2.5ns. The junction was linearly-graded and the concentration slope was measured to be 1.7${\times}10^{17}/{\mu}m$. the normalized detectivity in 3~5$\mu$m IR was 1${\times}10^{11}cmHz^{12}$/W, which is sufficient for real application.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.493-499
• /
• 2007

본 연구에서는 UV photo-lithography 방식의 particle replication in non-wetting templates(PRINT) 법을 이용하여 약물 전달에 운반체로 사용되는 $3{\mu}m{\times}3{\mu}m{\times}2{\mu}m$ 사이즈의 균일한 고분자 하이드로젤 입자를 제조하였다. 몰드(mold)와 기재(substrate)는 PRINT 방식을 통하여 탄성을 지닌 perfluoropolyethers(PFPE)로 제작하였으며 이를 반복적으로 사용할 수 있도록 하였다. 제작된 입자는 점착성이 있는 수용성 고분자를 이용하여 회수하였다. 입자의 주요 성분은 생분해성 고분자인 poly(ethylene glycol) diacrylate(PEG-diA)이며, 세포 uptake에 적합하도록 aminoethylacrylate(AEM)와 2-acryloxyethyltrimethyl ammonium chloride(AETMAC)를 첨가하였다. 본 연구를 통해 균일하고 원하는 크기의 생체분해성 고분자 입자를 제작하는 PRINT 기술이 약물 전달 및 유전자 전달에 필요한 수송체인 비바이럴 벡터를 제작하기 위한 효과적인 기술임을 제시하였다.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.16-21
• /
• 2005

Using a cantilever type nanoprobe having a 100㎚m aperture at the apex of the pyramidal tip of a near-field scanning optical microscope (NSOM), nanopatterning of polymer films are conducted. Two different types of polymer, namely a positive photoresist (DPR-i5500) and an azopolymer (Poly disperse orange-3), spincoated on a silicon wafer are used as the substrate. A He-Cd laser with a wavelength of 442㎚ is employed as the illumination source. The optical near-field produced at the tip of the nanoprobe induces a photochemical reaction on the irradiated region, leading to the fabrication of nanostructures below the diffraction limit of the laser light. By controlling the process parameters properly, nanopatterns as small as 100㎚ are produced on both the photoresist and azopolymer samples. The shape and size variations of the nanopatterns are examined with respect to the key process parameters such as laser beam power, irradiation time or scanning speed of the probe, operation modes of the NSOM (DC and AC modes), etc. The characteristic features during the fabrication of ordered structures such as dot or line arrays using NSOM lithography are investigated. Not only the direct writing of nano array structures on the polymer films but also the fabrication of NSOM-written patterns on the silicon substrate were investigated by introducing a passivation layer over the silicon surface. Possible application of thereby developed NSOM lithography technology to the fabrication of data storage is discussed.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.256-259
• /
• 2006

Vapor phase epitaxy(VPE)법을 사용하여 amorphous $SiO_x$. nanowires를 성장시켰다. Ni thin film을 촉매로 사용하여 Si 기판위에 $800{\sim}1100^{\circ}C$ 범위의 온도에서 성장시켰으며, $SiO_x$ nanowires의 성장 메커니즘은 Vapor-liquid-solid(VLS)으로 확인되었다. $SiO_x$ nanowires의 shape와 morphology는 scanning electron microscope(SEM)으로 분석하였으며, cotton-like형태이고 길이는 $10{\mu}m$정도였다. 그리고 구조적 특징은 transmission electron microscope(TEM)으로 관찰하였고, $SiO_x$ nanowires의 성분 분석은 energy dispersed X-ray spectroscopy(EDS)로 하였다. EDX spectrum으로 nanowires가 Si와 O로 구성되어졌음을 확인하였다.