• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.909-911
• /
• 2000

This paper introduce of program package for the numerical analysis of Electromagnetic field analysis using Finite Element Method, called Electro Magnetic Field(EMF). This software tool is developed by Changwon Nat'l Univ. cooperative with Hanyang Univ. and produced on a commercial scale. EMF has a simple, easy to use graphical interface which steps user through th problem setup, high accurate solution, and fast computation.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.675-677
• /
• 2000

In the paper the eddy current loss in brushless DC motor due to switching frequency supplied by PWM inverter, is analyzed. The compensated conductivity is used in order to analyze the eddy current loss in brushless DC motor which has lamination structure. The eddy current loss is deceased when switching frequency supplied by PWM inverter is gradually increased from 1.2kHz up to 12kHz. The high switching frequency of PWM inverter make the output wave into a similar sine wave and this leads to the decreasing eddy current loss.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.154-155
• /
• 2014

The object of this research is showing the effect of additional hydration of BS with OPC and less amount of gypsum in WA for the binder of BS with RFA mortar on strength development. The test performed was using factors of 0, 10, 30, and 50 % of OPC replacement for effect on strength development with additional stimulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.36-41
• /
• 2012

In this study, we turning plastic mold steel (STAVAX) against cutting speed, depth of cut, feed rate using whisker reinforced ceramic tool (WA1). To predict cutting force, analyze principal, radial, feed force with multi-regression analysis. Results are follows: From the analysis of variance, affected factor to cutting force feed rate, depth of cut, cutting speed in order and cutting speed was very small affect to cutting force. From multi-regression analysis, we extracted regression equation and the coefficient of determination$(R^2)$ was 0.9, 0.88, 0.856 at principal, radial and feed force. It means regression equation is significant. From the experimental verification, it was confirmed that principal, radial and feed force was predictable by regression equation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.105-106
• /
• 2014

본 논문에서는 대용량 푸시 전송을 위한 효율적인 아키텍처를 제안한다. MINA 프레임워크 상에서 XMPP 프로토콜을 이용한 푸시 전송은 세션이 연결된 환경에서 실시간 메시지를 전달하는 기술로 최근 푸시 전송 서버에서 많이 활용되고 있다. 하지만 웹 어플리케이션에서 전송함에 있어 WAS위에 푸시 모듈이 위치함으로 서버의 메모리 사용량이 오버로드 되는 부담을 안고 있다. 따라서 본 논문에서 제안하는 아키텍처는 서버를 이중화 하여 WAS와 MINA를 분리시켜 하나의 서버가 감당해야 하는 메모리 사용량을 감소 시키도록 하며 멀티큐와 프록시를 사용하여 대량의 푸시 전송시의 메시지 큐의 병목형상을 해결하고자 한다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.57-60
• /
• 1999

Amplification factor spectrum using the observed strong ground motions database in the Korean Peninsula has been obtained and compared with Standard Rpectrum which wa suggested by United States Nuclear Regulatory Committee. The observed ground motions from the Yongwol and the Kyoungju Earthquakes respectively which are supposed to represent domestic seismotectonic characteristics such as seismic source attenuation of the propagation meium and site specific effect are used for the analysis of amplification factor spectrum,. The database are slightly different from the those of the second study. Amplification factors have been calculated by comparing the observed peak ground motions with results from responses to the observed horizontal na vertical ground motions. The comparison have shown that the amplification factors resultant from this study exceeds those of Standard Response Spectrum The results suggest that the characteristics of seismic strong ground motion which are supposed to represent the domestic seismotectonic characteristics differs from those of Standard Response Spectrum especially at higher frequencies. The results from the 2nd study are similar to those of 1st analysis.

• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.109-115
• /
• 2013

Fast-grown wood generally contains a high proportion of juvenile wood that results in inferior dimensional stability and durability against biological deteriorations. In the present research, the Acacia mangium wood from plantation forests in Vietnam was treated with high temperature in air. The effects of heat treatment on physical properties of Acacia mangium wood, including mass loss (ML), water absorption (WA), water-repellent effectiveness (WRE) and anti-swelling efficiency (ASE) were examined. The results showed that the dimensional stability and the water-repellent effectiveness are increased by about 15-46% and 8-18%, respectively. However, the mass and dimension of wood are decreased. The results also indicated that both treatment temperature and treatment duration significantly affect the wood properties of Acacia mangium. It is thus concluded that heat treatment demonstrates an interesting potential to improve the wood quality of Acacia mangium for solid timber products. This technology provides an environmentally safe method of protecting sustainable common woods to give a new generation of value-added biomaterials with increased stability without the use of toxic chemicals.

• Annual Conference on Human and Language Technology
• /
• 2000.10d
• /
• pp.383-389
• /
• 2000

본고는 한영번역기 개발을 위한 기초 작업으로 '와/과'구문에 나타나는 여러 가지 패턴을 정리하고 이들 구문에서 보이는 중의성 문제를 해결하고자 하였다. 이러한 작업을 위해서는 자료 수집 및 분석이 우선이기 때문에 코퍼스에서 '와/과'구문을 뽑아서 분석하여 규칙을 마련하였다. 여기에서 사용된 자질연산문법(FCG)은 자연언어처리를 위한 문법으로 변형규칙과 수형도의 개념 없이 자질을 이용한 연산 체계로서 언어처리를 하고자 하는 문법이다. 이 이론을 바탕으로 규칙을 세우고 실제 언어 자료를 뽑아서 테스트를 하여 95%의 성공률을 보여주었다. 그러나 여기서의 연구는 '와/과'구문의 처리를 위한 가장 뼈대가 되는 기초연구이며, 앞으로 좀 더 많은 처리가 이루어져야 하리라 생각된다.

• Proceedings of the Zoological Society Korea Conference
• /
• 2003.08a
• /
• pp.205.3-205
• /
• 2003

No Abstract, See Full Text

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.4
• /
• pp.47-54
• /
• 2008

Preconstruction process in a lean project delivery system was studied in one large healthcare project working for a general contractor. Researchers joined a new lean delivery project for approximately six weeks and participated in preconstruction process including design coordination, management coordination, and target costing while concurrently interviewing other project participants and employees, recording activity in meetings, and otherwise observing the process. The preconstruction process in lean project delivery system, called integrated project design, showed many benefits such as brining expertise of downstream players (i.e., mechanical and electrical contractors) into the design phase. However, lack of leadership and lack of design-integrator blocked the successful application of a new concept of design process.