• Journal of the Korean earth science society
• /
• v.40 no.4
• /
• pp.406-413
• /
• 2019

Red-Green-Blue (RGB) imagery techniques are useful for both forecasters and public users because they are intuitively understood, have advantageous visualization, and do not lose observational information. This study presents a novel RGB convective cloud product and its application to tropical cyclone analysis using Communication, Oceanography, and Meteorology (COMS) satellite observations. The RGB convective cloud product was developed using the brightness temperature differences between WV ($6.75{\mu}m$) and IR1 ($10.8{\mu}m$), and IR2 ($12.0{\mu}m$) and IR1 ($10.8{\mu}m$) as well as the brightness temperature in the IR1 bands of the COMS, with the threshold values estimated from the Korea Meteorological Administration (KMA) radar observations and the EUMETSAT RGB recipe. To verify the accuracy of the convective cloud RGB product, the product was applied to the center positions analysis of two typhoons in 2013. Thus, the convective cloud RGB product threshold values were estimated for WV-IR1 (-20 K to 15 K), IR1 (210 K to 300 K), and IR1-IR2 (-4 K to 2 K). The product application in typhoon analysis shows relatively low bias and root mean square errors (RMSE)s of 23 and 28 km for DANAS in 2013, and 17 and 22 km for FRANCISCO in 2013, as compared to the best tracks data from the Regional Specialized Meteorological Center (RSMC) in Tokyo. Consequently, our proposed RGB convective cloud product has the advantages of high accuracy and excellent visualization for a variety of meteorological applications.

• The Korean Journal of Physiology
• /
• v.22 no.1
• /
• pp.63-77
• /
• 1988

This study was carried out to investigate relationships between maximal running time (MRT) and glycogen supercompensation in fast twitch white fibers (white vastus, WV), fast twitch red fibers (red vastus, RV) and slow twitch red fibers (soleus muscle, SM) of endurance-trained rats. Male rats of a Sprague-Dawley strain were divided into the trained groups and untrained groups. Untrained groups were acquired to run on the treadmill 10 minutes for 3 days and remained rest and maintained with mixed diet for 4 weeks. For last 10 days of resting period, the untrained rats were divided into 3 groups i.e. mixed diet (untrained control), high and low carbohydrate (CHO) diet groups. And each group was subdivided into 2 groups, one group was tested for the MRT and the other was sacrificed to measure the blood glucose, blood lactate, glycogen contents of liver and muscles. The experimental groups were trained on treadmill by a modified method of Constable et al. (1984) maintained with mixed diet for 4 weeks. After measurement of MRT of this group, they were also divided into high and low CHO groups and fed with these diet for 2 days and MRT of each group was measured again to see the effect of high or low CHO feeding on the MRT. Each group was maintained with the same diet for next 2 days during which some of the rats were sacrificed at given time intervals for the measurements of blood glucose and lactate, liver and the muscles glycogen. The results were summarized as follows; 1) In the untrained group, there were no significant differences between subgroups in MRT, glycogen conent of SM, RV and WV. But blood glucose concentration and glycogen content of liver of low CHO group were significantly lower than those of mixed diet group. 2) The MRT and glycogen content of SM, RV and WV of trained mixed diet group were significantly increased compared to those of untrained mixed diet group, but there was no significant difference in glycogen content of liver. 3) MRT of trained mixed, high CHO and low CHO groups were $137{\pm}9.8,\;176{\pm}9.8\;and\;129{\pm}7.3\;min$ respectively with the significant difference between them. 4) There were no differences in blood lactate concentrations between the trained high and low CHO groups immediately after maximal running and during recovery period. 5) Glycogen contents in RV and SM of trained high CHO group were significantly increased, and glycogen contents in RV, WV and liver of trained low CHO group were significantly decreased compared to those of trained mixed diet group. 6) Immediately after maximal running, the blood glucose concentrations of trained high CHO and low CHO groups were $73{\pm}4.0\;and\;67{\pm}6.9mg%$ respecitively. The blood glucose of the trained high CHO group was fully recovered within one hour by feeding. But blood glucose concentration of low CHO group was slowly recovered up to $114{\pm}4.1mg%$ after two hours of feeding and maintained. Those values were still significantly lower than that of trained mixed diet group. The synthetic rates of glycogen in liver and muscles during the recovery period followed the similar time course of the blood glucose recoveries in each group. These results suggest that an increase in MRT of trained high CHO group was attributed to the glycogen supercompensation in slow twitch muscle fibers. And a decrease in MRT of trained low CHO may be due to decreased glycogen contents of liver and muscles. The results also suggest that glycogen supercompensation was more evident in slow twitch red fibers of endurance-trained rats and blood glucose is one of the limiting factors of glycogen synthesis.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.279-286
• /
• 2001

The purpose of this study were to organize a sorting system, to develop an algorithm of image processing for the shape sorting, and to finally develop a scientific and objective shape sorting system of Korean Red-Ginseng for mechanization of the shape sorting. The results of this study are followed. 1. The shape sorting system of Korean Red-Ginseng consists of a control computer, a color CCD camera(WV-CP4110) for image processing, an image processing board(DT3153), and an image acquisition unit. 2. Many image processing skill, such as sliding, stretching, threshold, binary and D$\sub$t/ were used to analyze the shape sorting factors of Korean Red-ginseng. 3. The sorting accuracy of the shape sorting system for the Korean Red-Ginseng was 74.7%. It is 21.1% lower than that of human inspector. Although the system has low accuracy, using more cameras may improve its sorting accuracy.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.175-190
• /
• 2001

We propose, a new process capability index $C_{psk}$(WV) applying the weighted variance control charting method for non-normally distributed. The main idea of the weighted variance method(WVM) is to divide a skewed or asymmetric distribution into two normal distributions from its mean to create two new distributions which have the same mean but different standard deviations. In this paper we propose an example, a distributions generated from the Johnson family of distributions, to demonstrate how the weighted variance-based process capability indices perform in comparison with another two non-normal methods, namely the Clements and the Wright methods. This example shows that the weighted valiance-based indices are more consistent than the other two methods in terms of sensitivity to departure to the process mean/median from the target value for non-normal processes. Second method show using the percentage nonconforming by the Pearson, Johnson and Burr systems. This example shows a little difference between the Pearson system and Burr system, but Johnson system underestimated than the two systems for process capability.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.61-68
• /
• 2003

The H/V ratio (Horizontal to Vertical spectral ratio) has been used to infer site amplification without previous knowledge of near-surface geology and in fact may provide useful general site condition information. This method is used to classify the site characteristics of seismic stations in Korea by comparison with known H/V ratios representative of various sites all over the world. In addition, differences between horizontal and vertical kappa values were evaluated for each seismic stations by comparing WV ratio and Weak Motion amplification derived from inversion of stochastic ground motion parameters and were used as index to quantitatively classify the site characteristics.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.227-236
• /
• 2009

This study investigates the characteristics of cloud top brightness temperature (CTBT) of WV and IR1 from MTSAT-1R when lightning strikes in South Korea. For temporal and spatial collocations, lightnings, occurred only within ${\pm}5$ minutes from the six minutes added official satellite observation time (e.g., not 0600 UTC but 0606 UTC, considering the real scan time over South Korea), were selected. And the CTBTs corresponding to lightning spots were determined using the nearest pixel within 5 km. The brightness temperature difference (BTD, defined as WV - IR1) between two channels is negatively large when no lightning occurrs, whereas it increases up to positive values (sometimes, +5 K) and the largest frequency distributes around 225 K and 205 K in lightning cases. The probablistic approach for lightning frequency forecast, presented by Machado et al. (2008) in Southern America, was applied over South Korea and new exponential equations, with high coefficients of determination around 0.95 to 0.99, were developed using two channels' BTDs when lightning strikes. Moreover, a case study on 10th June, 2006, the largest number of lightning occurred between 2002 and 2006, was made. The major finding is that lightning activity is closely related to the dramatic decreases in BT and the increases in BTD (esp., equal to or larger than 0 K). Lightning frequency increases exponentially when BTD increases up to 0 K. Therefore, lightning forecast skill will be improved when the integrated strategy (synoptic background and satellite-based CTBT and BTD) is applied. It is believed that this study contributes to the application of the Korean first geostationary satellite (COMS), scheduled to launch at the end of this year, to severe weather detections.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.257-274
• /
• 2021

Although image segmentation is a critical part of object-based analysis of high resolution imagery, there has been lack of studies to evaluate the quality of image segmentation. In this study, we aimed to find practical and effective methods to obtain optimal parameters for image segmentation. Evaluations of image segmentation are divided into unsupervised, supervised, and qualitative visual interpretation methods. Using the multispectral UAV images, sampled from urban and forest over the Incheon Metropolitan City Park, three evaluation methods were compared. In overall, three methods showed very similar results regardless of the computational costs and applicability, although the optimal parameters determined by the evaluations were different between the urban and forest images. There is no single measure that outperforms in the unsupervised evaluation. Any combinations of intra-segment measures (V, COV, WV) and inter-segment measures (MI, BSH, DTNP) provided almost the same results. Although supervised method may be biased by subjective selection of reference data, it can be easily applied to detect object of interest. The qualitative visual interpretation on the segmentation results corresponded with the unsupervised and supervised evaluations.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.311-319
• /
• 2001

All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. Therefore, $C_{s}$ is proposed which extends the most useful index to date, the Pearn-Kotz-Johnson $C_{pmk}$, by not only taking into account that the process mean may not lie midway between the specification limits and incorporating a penalty when the mean deviates from its target, but also incorporating a penalty for skewness. Therefore we propose, a new process capability index $C_{psk}$( WV) applying the weighted variance control charting method for non-normally distributed. The main idea of the weighted variance method(WVM) is to divide a skewed or asymmetric distribution into two normal distribution from its mean to create two new distributions which have the same mean but different standard distributions. In this paper we propose an example, a distribution generated from the Johnson family of distributions, to demonstrate how the weighted variance-based process capability indices perform in comparison with another two non-normal methods, namely the Clements and the Wright methods. This example shows that the weighted valiance-based indices are more consistent than the other two methods In terms of sensitivity to departure to the process mean/median from the target value for non-normal process.s.s.s.

• The Korean Journal of Ecology
• /
• v.13 no.4
• /
• pp.297-309
• /
• 1990

The distribution of aquatic macrophytes in TanChon basin, a stream of the Han River, were investigated in terms of environmental gradient from June 1989 to March 1990. In the basin, 12 species of aquatic macrophytes were listed and four communities of Potamogeton crispus community. $P. octandrus$ community, $Hydrilla verticillata$ community and $Vallisneria$ asiatica community were recongized by character species. $P. crispus, P. octandrus$ and $V. asiatica$ were found in rapids while $H. verticillata , Ceratophyllum demersum$ and $Trapa japonica$ were done in pools. The depth of sediment $TanCh\u{o}n$ was showed as a exponential function of water velocity, Bd=exp (-K Wv). The values of Biochemical Oxygen Demand(BOD), Chemical Oxygen Demand(COD) and Suspendid Solid(SS) were recorded as range of 3.2~121.0mg/1, 4.2~54.5mg/1 and 4.1~114.0mg/1, respectively. And the linear positive correlation between BOD(X) and COD(Y) were expressed as Y=3.904+0.4308 X with $R^2$=0.9808 and also the correlation between BOD value(X) and SS value(Y) were done as Y=5.333+0.9606X with $R^2$=0.9700. In two dimensional analysis of BOD and water velocity, their clusters were showed similar types matching to communities classified by character species. However, no aquatic macrophyes were found at the site with BOD$\geq$50mg/l or DO$\leq$0.2mg/l.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.319-325
• /
• 1991

Aluminum phosphate gel was synthesized by reacting aluminum sulfate as a soluble aluminum salt to tribasic sodium phosphate in this study. The optimal synthesis conditions based on the yield of product were investigated by applying Box-Wilson experimental design. It was found that optimal synthesis conditions were as follows: Reaction temperature; $61~71^{\circ}C$, concentration of two reactants; 12.27~13.83%, concentration ratio of two reactants; [AI$_{2}$(SO$_{4}$)$_{3}$]/[Na$_{3}$PO$_{4}$]= 0.5, reaction time; 10.9~12.1 minutes, drying temperature of product; $60~72^{\circ}C$. Aluminum phosphate gel prepared by the optimal synthesis conditions was suspended with four types of natural and synthetic gums at the concentration of 0.375~1.5wv%. Their Theological properties of aluminum phosphate gels were examined with Haake-Rotovisco RV 20 rotational viscometer. It showed that the higher concentration of suspending agents and lower temperature, the higher viscosity. Aluminum phosphate gel suspended by pectin and agar showed plastic flow with rheopexy, and their gels suspended by sodium alginate and sod. CMC showed plastic flow with thixotropy.