• Journal of Hydrogen and New Energy
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2017

Hydrogen forms metal hydrides with some metals and alloys leading to solid-state storage under moderate temperature and pressure that gives them the safety advantage over the gas and liquid storage methods. However, it has disadvantages of slow hydrogen adsorption-desorption time and low thermal conductivity. To improve characteristics of metal hydrides, it is important that activation and thermal conductivity of metal hydrides are improved. In this study, we have been investigated hydrogen storage properties of Hydralloy C among Ti-Mn alloys. Also, the characteristics of activation and thermal conductivity of Hydralloy C were enhanced to improve kinetics of hydrogen adsorption-desorption. As physical activation method, PHEM (planetary high energy mill) was performed in Ar or $H_2$ atmosphere. Hydralloy C was also activated by $TiCl_3$ catalyst. To improve thermal conductivity, various types of ENG (expanded natural graphite) were used. The prepared samples were compacted at pressure of 500 bar. As a result, the activation properties of $H_2$ PHEM treated Hydralloy C was better than the other activation methods. Also, the amounts of hydrogen storage showed up to 1.6 wt%. When flake type ENG was added to Hydralloy C, thermal conductivity and hydrogen storage properties were improved.

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.30-42
• /
• 2008

The disease-specific (dsp) region and the hypersensitive response and pathogenicity (hrp) genes, including the hrpW, $hrpN_{Ep}$, and hrpC operons have previously been sequenced in Erwinia pyrifoliae WT3 [Shrestha et al. (2005a)]. In this study, the remaining hrp genes, including the hrpC, hrpA, hrpS, hrpXY, hrpL and hrpJ operons, were determined. The hrp genes cluster (ca. 38 kb) was comprised of eight transcriptional units and contained nine hrc (hrp conserved) genes. The genetic organization of the hrp/hrc genes and their orientation for the transcriptions were also similar to and collinear with those of E. amylovora, showing ${\geq}80%$ homologies. However, ORFU1 and ORFU2 of unknown functions, present between the hrpA and hrpS operons of E. amylovora, were absent in E. pyrifoliae. To determine the HR active domains, several proteins were prepared from truncated fragments of the N-terminal and the C-terminal regions of $HrpN_{Ep}$ protein of E. pyrifoliae. The proteins prepared from the N-terminal region elicited HR, but not from those of the C-terminal region indicating that HR active domains are located in only N-terminal region of the $HrpN_{Ep}$ protein. Two synthetic oligopeptides produced HR on tobacco confirming presence of two HR active domains in the $HrpN_{Ep}$. The HR positive N-terminal fragment ($HN{\Delta}C187$) was further narrowed down by deleting C-terminal amino acids and internal amino acids to investigate whether amino acid insertion region have role in faster and stronger HR activity in $HrpN_{Ep}$ than $HrpN_{Ea}$. The $HrpN_{Ep}$ mutant proteins $HN{\Delta}C187$ (D1AIR), $HN{\Delta}C187$ (D2AIR) and $HN{\Delta}C187$ (DM41) retained similar HR activation to that of wild-type $HrpN_{Ep}$. However, the $HrpN_{Ep}$ mutant protein $HN{\Delta}C187$ (D3AIR) lacking third amino acid insertion region (102 to 113 aa) reduced HR when compared to that of wild-type $HrpN_{Ep}$. Reduction in HR elicitation could not be observed when single amino acids at different positions were substituted at third amino acids insertion region. But, substitution of amino acids at L103R, L106K and L110R showed reduction in HR activity on tobacco suggesting their importance in activation of HR faster in the $HrpN_{Ep}$ although it requires further detailed analysis.

• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.197-205
• /
• 1997

Improved hypophysectomy technique and the efficacy of bGH in hypophysectomized female rats were studied as a basis for the function of endocrine gland and hormones. 1. With improved sublaryngeal a, pp.oach by hypophysectomy, 34 rats out of 40 were successfully hypophysectomized(more than 80% of success). The surgical time for hypophysectomy per rat was taken about 3.0$\pm$1.0 min. 2. For the effect of hypophysectomy and bGH on body weight gain among the 5 gruops of A, B, C, D, and E, the weight gains for A, B, C, D, and E, were 93g, 9.2g, 10.7g, 25.1g and 36.2g, respectively, which implied that hypophysectomy had a major effect on body weight. And also, the effect of bGH was paralleled with the level of bGH. There were significant difference between control and hypophysectomized groups, and between the bGH treated and bGH non-treated groups after hypophysectomy(p<0.01). 3. For the effect of hypophysectomy and bGH on the length of femur, tibia, humerus, and anterbrachi, longest was for A, shortest for B, and longer in order of C, D, and E. The A group was significantly longer than B, C, D, and E groups. The B group was shorter than C, D, and E groups(p<0.01). 4. For the effect of hypophysectomy and bGH on the weight of femur, tibia, humerus, and antebrachi, heaviest was for A, lightest for B, and heavier in order of C, D, and E. The A group was significantly heavier than B, C, D, and E groups. The B group was lighter than C, D, and E groups(p<0.01). 5. In changes of body length, and weights of liver and heart, A group was most drastically increased. Among the hypophysectomized groups, the change was increased in order of B, C, D, and E. Especially, the change of A group was significantly greater than B, C, D and E gruops. However, no significant differences were found among B, C, D, and E groups. 6. The hypophysectomy in rat had a significant effect on body growth. The effect of hormone was remarkably different depending upon the level of hormone. It was found that 300$\mu\textrm{g}$ of bGH/kg of body wt/day was slightly lower for normal growth.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.69-75
• /
• 1997

우리나라는 그동안 가스산업에서 고속성장을 이룩해 왔으나, 근래에는 중대가스산업사고가 빈번하게 일어나고 있다. 그건 이유로 1996년도에는 중대산업사고 예방제도가 전면적으로 실시되고 공정안전보고서를 작성하여 제출하도록 함으로서 위험성 평가의 중요성이 점차 높아가고 있으며, 위험성 평가 기법들에 대하여 여러 연구 단체에서 연구ㆍ시도되고 있다. 또한 이러한 연구ㆍ보고된 위험성 평가 기법들을 프로그램화하고 적용하려는 시도가 많이 있어 왔다. 본 연구에서는 기존에 연구ㆍ개발된 위험성 평가 기법들에 최근 컴퓨터 산업의 발달에 힘입어 각광을 받고 있는 지리정보시스템을 적용하고자 한다. 이러한 가스산업시설의 위험성 평가 시스템은 위험성을 평가하기 위해서 필요한 여러 가지 정보들을 지리정보시스템이 속성 데이터로서 저장하고 있으나, 가스산업시설에 관련된 주변의 도면들을 공간 데이터로서 저장하고 있다. 그리고 위험성 평가 시스템의 세부적인 기능을 모듈화하였다. 우선 위에 언급한 속성 데이터와 공간 데이터를 관리하는 모듈과 이러한 데이터를 가지고 사고영향 범위를 산출해내기 위한 모듈, 그리고 산출된 사고 영향 범위를 도면에 나타내는 모듈로 나뉘어져 있다. 이렇게 지리정보시스템에 구축되어 있는 도면에 위험성을 평가한 결과치를 나타냄으로서 위험성 평가 숙련자가 아니더라도 위험성 평가를 할 수 있고 결과를 분석하도록 도와 줄 수 있도록 할 수 있다. 또한 향후 재난관리시스템에서는 도면상의 도로에 교통량 가중치와 인근 소방서와 경찰서등의 위치를 관리하도록 지리정보시스템을 적용할 수 있으면, 가스시설물 관리시스템에서는 최근 대형가스사고의 대부분이 타공사에 의한 것임을 고려하여 가스배관망을 포함하여 기타 다른 지하배관망을 관리하도록 지리정보시스템을 적용할 수 있다. (중략)램프에서 좋은 광학적 특성을 얻기 위해 가장 중요한 것은 수축이 없이 방전을 확산시키는 것이다. 이를 위해서 램프구조와 구동법을 최적화하는 것이 필요하다. 또한 기체압력을 높임으로서 Xe의 여기복사를 얻을 수 있었다. 동시에 새로운 적용영역의 가능성을 탐구하는데 있다 하겠다.[C/N]의 값을 나타내었다.다.다.화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.었다.다._{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/m

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.496-504
• /
• 1996

The study was conducted to obtain the basic information on increasing aromatic degrees by shading and organic matter application on Condonopsis lanceolata. The result were as followings : Fresh root wt. in shading 55 % treatment was increased about twices, whereas fresh root weight in non-shading was decreased. But growth of ground parts such as vine length, leaf width, and leaf number was promoted under non-shading treatment. Macroelements such as K, Ca, and Mg, were increased in non-shading and higher organic matter application. The components such as crude protein, fiber, and ash were increased in the shading 55% treatment compared with non-shading. In the sixteen amino acids, arginine contents were the highest in non-shading and organic matter 30M/T. Recovery yield of essential oil was 0.005% in non-shading. The highest was organic matter 30M/T in the non-shading as 0.007%. Major aromatic constituents were 11 kinds of aliphatic alcohols such as I-hexanol, cis-3-hexenol, and trans-2-hexanal. As a result, major aromatic degree was higher in shading 55%, also increased in the much organic matter application. It was considered to be applied dense shading 55% and much organic matters to produce Condonopsis lanceolata plants which have high aroma and good quality.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.30-30
• /
• 2001

$Bi_2Te_3$계 열전재료는 200~400K 정도의 저온에서 네어지 변환효율이 가장 높은 재료로써 열전냉각, 바런재로 등에 응요하기 위하여ㅠ 제조법 및 특서에 관한 많은 연구가 진행되어 왔다. $Bi_2Te_3$계 화합물은 rhombohedral의 결정 구조를 가지는 층상 화 ;물로 결정대칭성으로 인해 연전기적으로 큰 이방성을 나타낸다. 현재는 일반향용고법에 의해서 입자를 a축 방향으로 성장시켜 큰 결정립을 가진 다결정재료를 사용하고 있으나, c면이 매우 취약하기 때문에 가공서이 나쁘다. 따라서 이와같은 단점을 개선하기 위하여 기계적 강도를 높일 수 있는 가공공정 및 합금설계에 대한 연구가 활발히 진행되고 있다. 측히 열간 압출법으로 제조된 열전재료는 결정립의 미세화와 높은 이방성으로 성능지수와 기계적 강도를 향상시킬 수 있다는 연구결과가 보고되고 있다 또한 Schultz드의 연구결과에 의하면 $Bi_2Te_3$ 계 열전재료는 소성변형에 의하여 발생한 점결함에 의하여 캐리어 농도가 변화되며 이로 인하여 재료의 전기적 성질이 결정된다고 하였다. 따라서 상당히 큰 소성가공량과 열전측성과의 관계를 규명하는 것은 매우 중요하다. 이에 본 연구에서는 압출변수 중 소성가공량에 중요한 변수로 작요아는 압출비를 변화시켜 최적의 열간 소성가공량을 검토하고, 이에 따른 열전측성과 압출비와의 상관관계에 대하여 연구하는 것을 목적으로 하였다. 연구에 사용된 N형의 조성은$Bi_2Te_{2.75}Se_{0.15}$로서 순도 99.99를 사용하였고, dopant로 0.1wt%의 $SbI_3$를 사용하였다. $Bi_2Te_{2.75}Se_{0.15}$ 분말은 가스분사법(Gas atomization Process)를 이용하여, 용탕제조시 아르곤가스로 산화를 방지하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기ㅖ적 분급법을 이용하여 분급하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기계적 분급ㅂ법을 이용하여 분급하였고, 압출에 이용된 분말은 250$\mu\textrm{m}$이하의 크기를 사용하였다. 또한 분말제조과정 중 형성되는 표면산화층을 제거하기 위하여 36$0^{\circ}C$에서 4시간동안 수소 환원처리를 행하였다. 제조된 분말은 열간 압출을 위하여 Aㅣcan에 넣고 냉간성형체를 만들고, 진공처리를 한 후 밀봉하여 탈가스처리를 하였다. 압출다이는 압출비가 각각 28:1과 16:1인 평다이(9$0^{\circ}C$)를 사용하여 각각 내경이 9, 12cm이고, 길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10$mm^3$ 크기의 시편을 준비하였다.준비하였다.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.341-350
• /
• 2002

Twenty four Hanwoo bulls(mean initial body weight 162$\pm$8.1kg) were employed to induce the regression equations on body weight gain and dry matter intake. The diets were fed in a 3${\times}$4 factorial arrangement; three roughage sources(rice straw, hay, corn silage) and four roughage ratios in ration(100, 60, 40, 20%). Bulls were alloted by incomplete turn over design with four replications. Daily body weight gain was greatest in bulls fed the corn silage as a roughage source and the 20% of roughage ratio, respectively. Bulls fed hay or corn silage only as feed kept in their body weight gain during the whole experimental period, however those fed rice straw only were in a negative body gain hereafter fatteningⅠperiod(350kg of body wt.). Dry matter intake per metabolizable body weight was decreased with increasing body weight. Dry matter intake was greatest in bulls fed the corn silage as a roughage source and the 20% of roughage ratio, respectively. The regression equations on daily body weight gain(DG, kg) and dry matter intake(DMI, kg/day) according to body weight(BW, kg) of Hanwoo bulls were derived as follows; DG = －0.842 + 17.5DMI/$BWkg^{0.75}$ DMI = 4.125 + 0.013BW + 1.075DG － 0.045NDF where, NDF is the percentage of neutral detergent fiber in ration.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2011

Methods of producing hydrogen include steam reforming, electrochemical decomposition of water, and the SI process. Among these methods, the Sulfur iodine process is one of the most promising processes for hydrogen production. The thermochemical sulfur-iodine (SI) process uses heat from a high-temperature-gas nuclear reactor to produce $H_2$ gas; this process is known for its production of clean energy as it does not emit $CO_2$ from water. But the SI-process takes place in an extremely corrosive environment for the materials. To endure SI environments, the materials for the SI environment will have to have strong corrosion resistance. This work studies the corrosion resistances of the Fe-Si, Ni-Ti and Ni Alloys, which are tested in SI-process environments. Among the SI-process environments, the conditions of boiling sulfuric acid and decomposed sulfuric acid are selected in this study. Before testing in boiling sulfuric acid environments, the specimens of Fe-4.5Si, Fe-6Si, Ni-4.5Si, Ni-Ti-Si-Nb and Ni-Ti-Si-Nb-B are previously given heat treatment at $1000^{\circ}C$ for 48 hrs. The reason for this heat treatment is that those specimens have a passive film on the surface. The specimens are immersed for 3~14 days in 98wt% boiling sulfuric acid. Corrosion rates are measured by using the weight change after immersion. The corrosion rates of the Fe-6Si and Ni-Ti-Si-Nb-B are found to decrease as the time passes. The corrosion rates of Fe-6si and Ni-Ti-Si-Nb-B are measured at 0.056 mm/yr and 0.16 mm/yr, respectively. Hastelloy-X, Alloy 617, Alloy 800H and Haynes 230 are tested in the decomposed sulfuric acid for one day. Alloy 800H was found to show the best corrosion resistance among the materials. The corrosion rate of Alloy 800H is measured at -0.35 mm/yr. In these results, the corrosion resistance of materials depends on the stability of the oxide film formed on the surface. After testing in boiling sulfuric acid and in decomposed sulfuric acid environments, the surfaces and compositions of specimens are analyzed by SEM and EDX.

• Industry Promotion Research
• /
• v.5 no.2
• /
• pp.9-17
• /
• 2020

This study analyzed SWOT based on existing literature data to establish strategic tasks and strategic directions for revitalization of social economic organizations (Chungnam region). First, as a result of SWOT analysis of social economic organizations, a total of 16 factors were derived from the factors for strength (S), weakness (W), opportunity (O), and threat (T), with 4 factors each. Second, for strategic factors for social economic organizations, 16 strategic tasks were derived from SO strategy, ST strategy, WO strategy, and WT strategy through SWOT Matrix Mapping for factors established through SWOT analysis. Strategic direction 1 was established as a strategic direction to improve self-sufficiency by establishing a sustainable management body as a "advancing the support policy base of social economic organizations". Strategic Direction 2 is "Creating a Growth Foundation for Social Economic Organizations", which means a strategic direction for social economic organizations to grow and develop on their own. Strategic direction 3 is "discovering and fostering social economic organizations," which means a strategic direction for sustainable growth by discovering and fostering organizations that meet local characteristics so that social economic organizations can solve various problems in the region. Strategic direction 4 was 'promotion and promotion of social economic organizations', which means strategic directions for promotion of social economic organizations and promotion of education for employees.

• Journal of Aquaculture
• /
• v.9 no.4
• /
• pp.395-407
• /
• 1996

A feeding experiment for 160 days was conducted to evaluate effects of dietary soybean meal (SBM) on the apparent digestibility, ammonia excretion and body composition of rainbow trout (Oncorhynchus mykiss). Seven diets containing $0\~70\%$ SBM were formulated based on iso-nitrogenous and iso-caloric basis of $44\%$ crude protein and approximately 4,200 Kcal/kg of gross energy. To evaluate the nutritional utilization of the SBM diets at the end of 60 and 120-day rearing with test diets, digestion rates of protein and lipid of SBM diets were measured. Fish fed the diets containing above $46\%$ SBM showed higher apparent digestibility for protein, but lower for lipid than did fish fed the control diet in both trials. Protein and fat contents in the carcass were similar for all experimental fish, except for fish fed $58\%$ and $70\%$ SBM which showed lower fat content than the others, but composition of fatty acid and amino acids were not affected by dietary SBM levels. Gill and urinary post-prandial ammonia ($NH_3-N$) excretions were measured at 12 and 24 hours after single feeding of the experimental diets. Excretions of $NH_3-N$ measured after 24 hours were almost 1 times higher than those measured after 12 hours. Total excretion fer the 24 hours by fish fed $70\%$ SBM was $15\%$ higher than that of fish fed the control diet. Results of present study may suggest that the rainbow trout which were fed above $34%\;or\;46\%$ of SBM diet showed a decrease gradually in lipid bioavailability compared to the control group.