• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.40-43
• /
• 1999

Electrochemical surface treatment of PAN-based carbon fibers in acidic electrolyte has been studied in increasing the surface functional groups on fiber surfaces for the improvement of fiber-matrix adhesion of the resulting composites. According to the FT-IR and XPS measurements, it reveals that the oxygen functional groups on fibers are largely influence on the composite mechanical behaviors, whereas the nitrogen functional groups are not affected in the system. In this work, a good correlation between surface functionality and mechanical properties is established.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.674-680
• /
• 2013

Basic studies for the treatment of particulate organic substances contained in wastewater by flotation have been conducted. Four kinds of plastics were chosen as the possibly existing organic particles in wastewater and the Zisman plots for these substances were constructed by measuring the contact angle of liquids on their surfaces. The critical surface tensions for these organic substances were estimated based on the constructed Zisman plot and the floatability of organic substances were regarded to be related with their molecular structure. The existence of dissolved organic substances such as a surfactant was observed to affect the extent of flotation of particulate organics. In addition, the consideration of work of adhesion was thought to be better than adopting the critical surface tension as the analytical basis in the operational design of flotation process of organic particles.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2000년도 추계학술발표회 논문집
• /
• pp.144-147
• /
• 2000

• 접착 및 계면
• /
• 제4권1호
• /
• pp.18-27
• /
• 2003

Micromechanical 시험법과 표면 젖음성 측정을 이용하여 플라즈마 처리된 생분해성 poly(p-dioxanone) (PPDO) 섬유강화 poly(L-lactide) (PLLA) 복합재료의 계면물성과 미세파괴 분해메카니즘을 연구하였다. PPDO 섬유강화 PLLA 복합재료는 장기간의 사용기간 동안 우수한 기계적 물성을 제공할 수 있다. PPDO 섬유와 PLLA 기지재료의 분해정도는 열분석과 광학적인 관찰을 통해서 확인하였다. PPDO 섬유와 PLLA 기지재료 사이의 계면전단강도와 접착일은 플라즈마 처리 시간이 60초 일때 가장 컸으며, 접착일과 polar 표면자유에너지는 계면전단강도와 비례하였다. 초기상태의 PPDO 섬유는 연성파단 형상이 나타났으나, 분해시간이 진행됨에 따라 분자량 감소로 인해 점차적으로 취성 파단 형상으로 변하였다. 계면물성과 미세파괴 분해메카니즘은 분해가 진행됨에 따라 변하기 때문에 섬유강화 생분해성 복합재료의 성능을 조절하는데 중요한 요인들이다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.53-58
• /
• 2013

Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.254-255
• /
• 2005

In this work, the effects of plasma treatment on surface properties of semi conductive silicone rubber were investigated in terms of X-ray photoelectron spectroscopy(XPS). The adhesion characteristics of semiconductive-insulating interface layer of silicone rubber were studied by measuring the T-peel strengths. As a result, semiconductive silicone rubber surfaces treated with plasma discharge led to and increase in oxygen-containing functional groups, resulting in improving the degree of adhesion of the semiconductive-insulating interface layer of silicone rubber. these results are probably due to the modifications of surface functional groups or polar component of surface free energy of the semi conductive silicone rubber.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.124.1-124.1
• /
• 2016

In this work, uniform thickness and good adhesion of electrodeposited copper layer were achieved on AZ91 Mg alloy in alkaline noncyanide copper solution containing pyrophosphate ion by employing appropriate zincate pretreatment. Without zincate pretreatment, the electrodeposited copper layer on AZ91 Mg alloy was porous and showed poor adhesion which was explained by small number of nucleation sites of copper due to rapid dissolution of the magnesium substrate in the pyrophosphate solution. The zincate pretreatment was found as one of the most important steps that can form a conducting layer to cover AZ91 surface which decreased the dissolution rate of AZ91 Mg alloy about 40 times in the copper pyrophosphate solution. Electrodeposited copper layer on AZ91 Mg alloy after an appropriate zincate pretreatment showed good adhesion and uniform thickness with bright surface appearance, independent of the deposition time but the surface roughness of the electrodeposited copper layer increased with increasing Cu deposition time.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.405-412
• /
• 1995

In order to estimate the wettability of the borosilicate glasses with different composition on the noble metals of gold and silver, the measurements of the contact angle between the solid and the liquid were made at various temperatures and holding times using the sessil-drop method. The wetting behavior and the adhesion of the phases were strongly influenced by the thermal or the physical characteristics of the materials. The dependence of wetting angle ($\theta$) on the holding time (t) could be represented by the relation of $\theta$=a.tb, whereby the wettability of the systems was quantitatively compared. Also with increasing content of borosilicate glass in the glass-gold matrix composite, the tensile strength was decreased whereas the elastic modulus was increased.

• 한국표면공학회지
• /
• 제24권1호
• /
• pp.18-24
• /
• 1991

In the present work the adhesion failure of a hot-dip galvanized coating has been studied as a function gas composition temperature of strip and of atmospheric gas in furnace. The adhesion failure of the hot-dip galvani-zed coating is classified as three mechanisms : carbon deposition, oxide film formation and alloy layer formation. The adhesion failure due to oxide film formation decreased markedly by increasing the gases temperature of direct fired furnace(DFF) in order to improve the reducing ability of steel strip. Optimum conditions of operating and manufacturing facilities for improving the coating adherence are suggested by analyzing the interface between steel substrate and coating layer.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 2004년도 Annual Meeting of KSAP : New Drug Development from Natural Products
• /
• pp.61-77
• /
• 2004

Present review is built on base of research work on Ganoderma lucidum in our laboratory. A great deal of experimental evidence has suggested that the pharmacological activities of Ganoderma lucidum(Lingzhi) are related to anti-oxidative and free radical scavenging activity. The anti-oxidative and free radical scavenging effects of polysaccharides and triterpenoids isolated from Ganoderma lucidum in different oxidative injury models including tert-butylhydroperoxide (tBOOH)- damaged mice peritoneal macrophages, alloxan-induced diabetes, experimental liver injury models induced by carbon tetrachloride (CC14), D-galactosamine (DGal) and Bacillus Calmette-Guerin(BCG) plus lipopolysaccharides(LPS) were investigated. It is also demonstrated that Lugu lingzhi, one of Ganoderma product, significantly inhibited LDL oxidation mediated by endothelial cells and decreased monocyte adhesion to endothelial cell (EC) induced by Oxidative low-density lipoprotein (ox-LDL) and advanced glycation endproducts(AGE). Lugulingzhi-treated serum could markedly inhibit the expression of intercellular cell adhesion molecule-l (ICAM-1) and vascular cell adhesion molecule-l (VCAM-1) induced by ox-LDL and AGE.