• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.642-643
• /
• 2006

Direct reduction and carburization process was thought one of the best methods to make nano-sized WC powder. The oxide powders were mixed with graphite powder by ball milling in the compositions of WC-5,-10wt%Co. The mixture was heated at the temperatures of $600{\sim}800^{\circ}C$ for 5 hours in Ar. The reaction time of the reduction and carburization was decreased as heating temperatures and cobalt content increased. The mean size of WC/Co composite powders was about 260 nm after the reactions. And the mean size of WC grains in WC/Co composite powders was about 38 nm after the reaction at $800^{\circ}C$ for 5 hours.

• Asian Journal of Innovation and Policy
• /
• 제12권3호
• /
• pp.304-322
• /
• 2023

Text data mining ('big data methods') is one of the most widely used approaches during the COVID-19 pandemic. In particular, text data mining on Scopus databases or Web of Science (WoS). Text data mining is widely used to collect literature for later bibliometric analysis, and in the end, it becomes a literature review article. Therefore, in this article, we reveal the trend of publication of literature reviews in Scopus journals from Indonesia, Japan, South Korea, Vietnam, Singapore, and Malaysia. This article describes two essential parts, namely 1) a comparison of international publication trends and subject area of literature review publications, and 2) a comparison of Top 5 for Authors, Affiliation, Source Title, and Collaboration Country.

• 자원환경지질
• /
• 제12권4호
• /
• pp.181-195
• /
• 1979

The Nambu orebodies of the Okbang tungsten mine are hosted in the Precambrian amphibolite and Weonnam formation. These orebodies can be classified into two types; The scheelite-bearing ore vein occurring in the amphibolite (the Nambu 1, 2 adits) and tungsten-bearing quartz vein along the contact between the amphibolite and the Weonnam formation (the Young-ho, -1, -2, -3 levels). The scheelite-bearing ore vein in the amphilbolite is discontinuous, narrow, and highly irregular in geometry, occurring only within the amphibolite with which of the vein is graduational. Based on these feature of the mode of occurrence, the origin of this ore type might be attributed to a potential segregation of tungsten ore fluid in situ from hornblenditic basic magma of the host rock. Tungsten-bearing quartz vein, however, is considered to have deposited along the N30-60E trending fractures as a later hypothermal vein after the hornblendite was emplaced. The principal ore mineral is scheelite with minor amount of wolframite, and the gangue minerals are quartz, and small amounts of fluorite, pyrrhotite, chalcopyrite and calcite. Fluid inclusion study of minerals from the Nambu orebody reveals that the fluids in fluorite of the scheelite-bearning ore vein attained a temperature range of $208{\sim}256^{\circ}C$ and those in quartz from the tungsten-bearing quartz vein a temperature range of $220{\sim}357^{\circ}C$. The real formation temperatures can be somewhat higher than filling temperatures, if pressure correction is made. Chemical analysis of 8 amphibolitc samples on major and some trace elements indicate that the amphibolite is igneous origin. On a Niggli diagram (al-alk)versus c, the analytical values are plotted on an igneous field, and on a Niggli diagram mg versus c they follow a karroo igneous trend line. According to the Ba, Cr, and Ni versus Niggli mg plots suggested by Leake (1964), Okbang amphibolite fall outside a pelitic field and compare favorably with his plots form ortho-amphibolites. Analitical values of $MoO_3$ of 8 samples of scheelite minerals from the Nambu orebody indicate that the tungsten-bearing quartz vein (type n) of Nambu orebody shows a range from 1. 69% to 4.38% which is higher than 0.94%~3.25% $MoO_3$ for the scheelite-bearing ore vein (type I). This fact indicates that the type II was deposited in a lower $fO_2/higher$ $fO_2$ environment and under lower temperature than the type I. Analysis of major components $WO_3$, MnO, and FeO of 6 samples of wolframite from the type II veins revealed that they contain 73.35~76.2% $WO_3$, 7.94~11.63% MnO, and 10.53~14.82% FeO. MnO/FeO ratios of wolframite shows the range of 0.85~1.17 which suggests a slightly higher temperature type of deposits than other major tungsten deposits in the country.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.47-54
• /
• 2003

This paper have examined the optimum combination of SNCR and SCR by varying SNCR injection temperature and NSR ratio along with SCR space velocity. NOx reduction experiments using a SNCR/SCR combined process have been conducted in simple NO/NH$_3$/O$_2$ gas mixtures. Total gas flow rate was kept constant 4 liter/min throughout the SNCR and SCR reactors, where initial NOx concentration was 500 ppm in the presence of 5% O$_2$. Commercial catalyst, sulfated V$_2$O$\_$5/-WO$_3$/TiO$_2$, was used for SCR NOx reduction. The residence time and space velocity were around 1.67 sec, 2,400 h$\^$-1/ and 6,000 h$\^$-1/ in the SNCR and SCR reactors, respectively. SNCR NOx reduction effectively occurred in a temperature window of 900-950$^{\circ}C$. About 88% NOx reduction was achieved with an optimum temperature of 950$^{\circ}C$ and NSR=1.5. SCR NOx reduction using commercial V$_2$O$\_$5/-WO$_3$-SO$_4$/TiO$_2$ catalyst occurred in a temperature window of 200-450$^{\circ}C$ 80-98% NOxreduction was possible with SV=2400 h$\^$-1/ and a molar ratio of 1.0-2.0. A SNCR/SCR(SV=6000 h$\^$-1/) combined process has shown same NOx reduction compared with a stand-alone SCR(SV=2400 h$\^$-1/) unit process of 98% NOx reduction. The NH$_3$-based chemical could routinely achieve SNCR/SCR combined process total NOx reductions of 98% with less than 5 ppm NH$_3$ slip at NSR ranging from about 1.5 to 2.0, SNCR temperature of 900$^{\circ}C$-950$^{\circ}C$, and SCR space velocity of 6000 h$\^$-1/. Particularly, more than 98% NOx reduction was possible using the combined process under the conditions of T$\_$SNCR/=950$^{\circ}C$, T$\_$SCR/=350$^{\circ}C$, 5% O$_2$, SV=6000 h$\^$-1/ and NH$_3$/NOx=1.5. A catalyst volume was about three times reduced by SNCR/SCR combined process compared with SCR process under the same controlled conditions.

• Journal of Information Display
• /
• 제6권2호
• /
• pp.25-29
• /
• 2005

The luminescent properties of $Eu^{3+}$ and $Sm^{3+}$ doped potassium tungstate phosphor are investigated. The $K_{4-3x}(WO_4)_2:Eu^{3+}\;_x,Sm^{3+}\;_y$ phosphor is produced by firing the mixed precursors, followed by re-firing with a flux. The re-firing process results in the defect-free surface and uniform growth of the particles. The strong absorption in the region of ultra violet light is observed due to the 4f-4f electron transitions of the $Eu^{3+}$ and $Sm^{3+}$ ions. The doping concentration of europium into potassium tungstate is relatively high, compared to other host materials. It is revealed that the crystal structure is a monoclinic with space group, C2/c. This crystal structure facilitated the $Eu^{3+}$ ions to be located with the Eu-Eu distance larger than 5 ${\AA}$ so that concentration quenching does not occur even at high doping concentration. The excitation spectrum could be adjusted by the introduction of the samarium. A small amount of the $Sm^{3+}$ ions that acts as a sensitizer increases the energy absorption peak around 405 nm.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.178-179
• /
• 2014

In this study, $Ni-W-Si_3N_4$ alloy composite coatings were prepared by pulse electrodeposition method using nickel sulfate bath with different contents of tungsten source, $Na_2WO_4.2H_2O$, and dispersed $Si_3N_4$ nano particles. The structure and microstructure ofcoatings was separately analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). Results indicated that nano $Si_3N_4$ and W content in alloy had remarkable effect on microstructure, microhardness and scratch resistant properties. Tungsten content in Ni-W and $Ni-W-Si_3N_4$ alloy ranged from 7 to 14 at.%. Scratch test results suggest that as compared to Ni-W only, $Ni-W-Si_3N_4$ prepared from Ni/W molar ratio of 1:1.5 dispersed with 20 g/L $Si_3N_4$ has shown the best result among different samples.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.171-172
• /
• 2015

$Ni-W-Si_3N_4$ alloy composite coatings were prepared by pulse electro-deposition method using nickel sulfate bath with different contents of tungsten source, $Na_2WO_4.2H_2O$, and dispersed $Si_3N_4$ nano-particles. The structure and micro-structure of coatings was separately analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). Results indicated that nano $Si_3N_4$ and W content in alloy had remarkable effect on micro-structure, micro-hardness and scratch resistant properties. Tungsten content in Ni-W and $Ni-W-Si_3N_4$ alloy ranged from 7 to 14 at.%. Scratch test results suggest that as compared to Ni-W only, $Ni-W-Si_3N_4$ prepared from Ni/W molar ratio of 1:1.5 dispersed with 20 g/L $Si_3N_4$ has shown the best result among different samples.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2365-2378
• /
• 2018

We investigated the correlation between vanadium surface density and VOx structure species in the selective catalytic reduction of NOx by $NH_3$. The properties of the $VOx/TiO_2$ catalysts were investigated using physicochemical measurements, including BET, XRD, Raman spectroscopy, FE-TEM, UV-visible DRS, $NH_3-TPD$, $H_2-TPR$, $O_2-On/Off$. Catalysts were prepared using the wet impregnation method by supporting 1.0-3.0 wt% vanadium on $TiO_2$ thermally treated at various calcination temperatures. Through the above analysis, we found that VOx surface density was $3.4VOx/nm^2$, and the optimal V loading amounts were 2.0-2.5 wt% and the specific surface area was $65-80m^2/g$. In addition, it was confirmed that the optimal VOx surface density and formation of vanadium structure species correlated with the reaction activity depending on the V loading amounts and the specific surface area size.

• 한국지구과학회지
• /
• 제21권5호
• /
• pp.553-562
• /
• 2000

본 연구에서는 경상북도 청송 주왕산지역 대전사 현무암의 산출 상태 및 분포 양상을 검토하고, 암석기재적 특성을 알아보았다. 야외 조사 결과, 주왕산 화산암체의 최하부층에 해당하는 대전사 현무암층은 전체적으로 12매의 용암과 9매의 페페라이트가 교호하며, 각 용암과 페페라이트의 암층의 두께는 다양하다. 본 층에서 나타나는 페페라이트는 현무암과 세일이 혼합되어 있으며, 현무암은 쇄설의 형태로 나타나고 세일은 현무암의 기질을 메우는 간극상을 이룬다. 이는 용암이 분출하여 고화되지 않은 젖은 세일층 위를 흐르거나, 관입으로 인해서 용암과 퇴적물 사이의 접촉부에서 생성된 것으로 사료되며, 이들 페페라이트는 조직상으로 구상 페페라이트로 분류할 수 있다. 현무암류는 육안으로 반정이 관찰되지 않으며 기공이 없는 치밀한 현무암이지만, 한 단위의 용암층 내에서 상부에는 다공질의 현무암이 발견되기도 한다. 경하에서의 현무암류는 주된 반정 광물로 가상의 감람석을 가지며, Mg#이 높은 암석에서는 사장석과 단사휘석의 반정도 보인다. 석기는 주로 서브오피틱 조직을 보이지만, 국지적인 냉각률의 차이로 인한 오피틱 조직과 인터그래뉼라 조직도 관찰된다. 사장석은 대부분 라브라도라이트(An$_{55.0}{\sim}_{67.7}$)이며, 일부 안데신(An$_{44.3}$)과 바이토우나이트(An$_{74.5}$)로 분류된다. 단사휘석의 평균 조성은 Wo$_{41.6}$En$_{45.1}$Fs$_{13.3}$으로써 보통휘석에 해당한다. 불투명 광물은 티탄자철석과 티탄철석으로 구성되어 있다.

• 공업화학
• /
• 제5권2호
• /
• pp.327-336
• /
• 1994

본 연구는 아크롤레인의 선택산화반응에서 Mo-V-O와 금속산화물의 기계적 혼합촉매에 대한 synergy 효과를 고찰한 것으로 금속산화물로는 $SnO_2$, ${\alpha}-Sb_2O_4$, $WO_3$, ${\alpha}-Al_2O_3$, CuO, $MnO_2$, $Cu_2O$, MgO, CoO 그리고 ZnO 등을 사용하였다. $SnO_2$나 ${\alpha}-Sb_2O_4$와 Mo-V-O의 혼합물 촉매는 Mo-V-O보다 높은 전화율과 수율을 나타내었는데 이것은 이들이 산소 빈자리에 해리 홉착된 산소를 형성하여 Mo-V-O에 전달하는 상간협동에 의한 것으로 판단된다 그러나 $Cu_2O$, MgO, CuO, $MnO_2$와 Mo-V-O의 혼합물 촉매의 경우 전화율은 증가하였으나 수율은 감소하였고, CoO와 ZnO는 Mo-V-O의 촉매성능을 억제하였다. 각 금속산화물의 역할이 서로 다른 점을 그들의 산화-환원 특성으로 설명하였다.