• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.19-25
• /
• 2008

In this paper, the front end module (FEM) was proposed for 2.4GHz WLAN band by LTCC multilayer application. The FEM was composed of power amplifier IC, switch IC, and LTCC module. LTCC module consists of output matching circuit and lowpass filter as Tx part, bandpass filter as Rx part. Design of output matching circuit for LTCC was used matching parameter from output matching circuit based on lumped circuit on the PCB board. The dielectric constant of LTCC substrate is 9. The substrate was composed of total 26 layers with each 30um thickness. Ag paste was used for the internal pattern as the conductor material. The size of the module is $4.5mm{\times}3.2mm{\times}1.4mm$. The fabricated FEM showed the gain of 21dB, ACPR of less than -31dBc first side lobe and Less than -59dBc second side lobe and the output power of 23Bm at P1dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.595-604
• /
• 2009

The HCCA reserves the channel resources based on the mean data rate in IEEE 802.11e. It may cause either the waste of channel resource or the increase of transmission delay at MAC layer if the frame size is rapidly varied when a compressed mode video codec such as MPEG video is used. To solve these problems, it is developed that the packet scheduler allocates the wireless resource adaptation by according to the packet size. However, it is difficult to perform the admission control because of the difficulty with calculating the available resources. In this paper, we propose a CAC mechanism to solve the problem that may not satisfy the QoS by increasing traffic load in case of using EDCA. Especially, the proposed CAC mechanism calculates the EB of TSs using the traffic information transmitted by the application layer and the number of average transmission according to the wireless channel environment, and then determines the admission of the TS based on the EB. According to the simulation results of the proposed CAC mechanism, it admitted the TSs under the loads which are satisfied within the delay bound. Therefore, the proposed mechanism guarantees QoS of streaming services effectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1373-1392
• /
• 2017

WiFi Direct (WD) is a state of the art technology for a Device-to-Device (D2D) communication in 802.11 networks. The performance of the WD system can be significantly affected by some key factors such as the type of application, specifications of MAC and PHY layer parameters, and surrounding environment etc. It is, therefore, important to develop a system model that takes these factors into account. In this paper, we focus on investigating the design parameters of the PHY layer that could maximize the efficiency of the WD 802.11 system. For this purpose, a basic theoretical model is formulated for a WD network under a 2x2 Multiple In Multiple Out (MIMO) TGn channel B model. The design level parameters such as input symbol rate and antenna spacing, as well as the effects of the environment, are thoroughly examined in terms of path gain, spectral density, outage probability and Packet Error Rate (PER). Thereafter, a novel adaptive algorithm is proposed to choose optimal parameters in accordance with the Quality of Experience (QoE) for a targeted application. The simulation results show that the proposed method outperforms the standard method thereby achieving an optimal performance in an adaptive manner.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.352-358
• /
• 2012

A sensor network system can be an efficient tool for healthcare telemetry for multiple users due to its power efficiency. One drawback is its limited data size. This paper proposed a real-time application of data compression/decompression method in u-Health monitoring system in order to improve the network efficiency. Our high priority was given to maintain a high quality of signal reconstruction since it is important to receive undistorted waveform. Our method consisted of down sampling coding and differential Huffman coding. Down sampling was applied based on the Nyquist-Shannon sampling theorem and signal amplitude was taken into account to increase compression rate in the differential Huffman coding. Our method was successfully tested in a ZigBee and WLAN dual network. Electrocardiogram (ECG) had an average compression ratio of 3.99 : 1 with 0.24% percentage root mean square difference (PRD). Photoplethysmogram (PPG) showed an average CR of 37.99 : 1 with 0.16% PRD. Our method produced an outstanding PRD compared to other previous reports.

• Journal of Information Management
• /
• v.35 no.3
• /
• pp.75-107
• /
• 2004

The concept of "ubiquitous", which has been recently discussed in several industries, implies accessing a network using a computer from anywhere at anytime. The ubiquitous technology has been widely researched for distribution, construction, and medical treatments. Now, it has extended its application to libraries. The ubiquitous technology currently applied to a number of national libraries calls for a systematic study of an ubiquitous library. This thesis aims at presenting a model of introducing the ubiquitous technology to university libraries.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.152-156
• /
• 2006

기존의 가정용 건강측정기는 기기만이 독립적으로 사용되거나 기기로부터 생체정보를 전송 받아 로컬 컴퓨터에서만 처리하는 시스템이 주를 이루었다. 본 논문에서는 가정용 건강측정기 중 혈당측정기를 적외선 통신(Infrared Communication, IrDA)으로 PocketPC에 연결하여 혈당정보를 전송받는다. 이러한 정보를 PocketPC용 CDMA(Code Multiple Access) 확장 팩을 이용하여 문자메시지(Short Message Service, SMS)로 다른 휴대폰에 전송하고, 무선 랜(WLAN, IEEE 802.11)을 이용하여 웹서버에 있는 게시판에 건강측정정보를 자동 등록 하여 정보를 공유할 수 있는 시스템을 구축하였다. 특히 비공개된 혈당측정기의 프로토콜을 분석하여 통신에 사용하였으며, API(Application Programming Interface)를 제공하지 않는 CDMA 확장팩 시스템의 사용자용 프로그램을 IPC(Inter Process Communication)를 이용한 제어를 통해 필요한 태스크를 수행하는 기법을 사용하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2291-2293
• /
• 2005

본 논문에서는 평면 역F 안테나(PIFA)형태의 단일 안테나로 2GHz 대역과 5GHz 대역의 무선 근거리통신망의 주파수 대역을 수용할 수 있는 안테나를 설계 제작하였다. 안테나의 크기를 줄이기 위해 안테나 Element는 Meander Line을 이용하여 설계하였다. 측정 시 반사손실 10dB(VSWR=2.0)를 기준으로 2GHz 대역에서 10.8%와 5GHz대역에서 12.7%의 대역폭을 얻었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1554-1557
• /
• 2020

Looking at the direction of the recent amendments of 802.11 family, there are two major trends. One is to enable the wireless transceivers to support the extremely high-speed wireless transmissions, which has been the mainstream so far. Another big trend is providing a high-performance wireless application platform that meets the demands of the market. This paper summarizes the brand-new IEEE 802.11 amendments from 11ax to 11bf under development by analyzing the innovative features and use cases on them. We provide the vision and direction for the research on the revolutionary data-hungry Wi-Fi 6 and the IEEE 802.11be, alias Wi-Fi 7.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.161-167
• /
• 2012

Portable devices such as smartphones with built-in wireless LAN to the prevalence of anyone using. But the wireless Internet connection and positioning services are limited to high-quality wireless service, they may not be available. Thus, wireless LAN infrared sensor in the same way as with angry alternative way wireless capabilities of the application automatically identify the location of the Sensor application as an alternative method is proposed. Thus, wireless LAN, such as infrared sensors and other alternzative methods of wireless features in a way where the application can recognize and automatically recognize the sensor application as an alternative method is proposed. Sensor is signals between wireless LAN and access points using the sensitivity, WLAN antenna with omni-directional signal output operation of the sensor is assumed to be recognize this by putting a direction to obtain through the proposed algorithm, Sensors such as photo-coupler without direct recognition sensor, wireless LAN and access points, the same function as the connection between the sensitivity to perform its function was to utilizing.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.820-824
• /
• 2004

Personal Robot System in developing, have a module architecture, each module are connected through heterogeneors network systems like Ethernet, WLAN (802.11), IEEE1394 (Firewire), Bluetooth, USB, CAN, or RS-232C. In developing personal robot system we think that the key of robot performance is interoperability among modules. Each network protocol are well connected in the view of network system for the interoperability. So we make a bridging architecture that can routing, converting, transporting data packets with matcing each network's properties. Furthermore we suggest a advanced design scheme for realtime / non-realtime and control signal (short, requiring hard-realtime) / multimedia data (large, requiring soft-realtime). By some application systems, we could test performance, interoperability and stability. In this paper, we show our design concept, middleware architecture, and some applications systems using this middleware.