• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.425-436
• /
• 2008

In this paper, we propose a resource effective call admission control(CAC) in integrated WLAN and cellular network. The proposed CAC mitigates the congestion of cellular network by handing over non-realtime traffic to WLAN. We analyze the proposed CAC in numerical and simulation method. The simulation results show that the proposed CAC achieves better performance than normal CAC. Especially, the proposed CAC can sustain desired QoS more robustly against high incoming non-realtime traffic load than againt realtime traffic load.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2265-2272
• /
• 2013

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for is proposed WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patches, and modified feed line, and rectangular slot in the ground plane for dual-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that effect antenna characteristics. Using the obtained parameters, the antenna is fabricated, and the return loss coefficient, gain, and radiation patterns are determined for WLAN application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.821-828
• /
• 2012

Recently, in order to provide the mobile multimedia service cost-effectively, the user's demand has been greatly increasing to use wireless LAN (WLAN). But existing WLAN (Wireless LAN) is vulnerable to attack of outside, as users are connecting AP using Open Authentication. In this article, we have designed and implemented WLAN Information Sharing System using social network service (SNS) which is efficiently managing. WLAN secure key. A proposed WLAN Information Sharing System model has been proposed in which the social trust strength between people is employed for WLAN access control.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.516-526
• /
• 2007

Wireless mesh network is not only WLAN technology but it says core technology for implementation of ubiquitous network and we have to application on a various field through connection with the sensor network. However, there are limited to 100mW in the maximum power because WLAN is used into transmission frequency band to ISM band. The mesh network based on WLAN is essential study for a long distance transmission in the limited maximum power that it is doing to cost-efficient network of backbone. Therefore, in this paper, we have presented an conquerable method to limitation of reaching distance of wireless mesh network and made several experiments to presentation the proposed method. The results show that it is possible to rise a long distance transmission and power efficiency into application of various antenna and function definition and implementation of device driver.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.465-473
• /
• 2012

In this study, a novel dual band planar monopole antenna for wireless local area network (WLAN)/ Worldwide Interoperability of Microwave Access (WiMAX) application was designed, fabricated, and measured. The proposed antenna consists of two hook shaped strips, an asymmetric ground plane, and a rectangular slit in the ground plane. Acceptable agreements between the measured and simulated results are achieved. Numerical and experimental results demonstrate that the proposed antenna satisfies the 10 dB impedance bandwidth requirement while covering the WLAN and WiMAX bands simultaneously. This paper also presents and discusses the 2D radiation patterns and 3D gains according to the results of the experiment that was conducted.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.763-768
• /
• 2015

In this paper, a microstrip patch antenna with arrow and ribbon shape for WLAN was designed and manufactured. The antenna was designed on a FR-4 substrate that has a thickness of 0.8mm and a dielectric constant of 4.4. The substrate size is $50{\times}40mm^2$. A commercially available tool was used for simulation to get the optimized parameters and the optimized values were obtained by finding the parameters that act sensitively to the performance of the antenna. The proposed antenna was produced using the optimized values, and characteristics of return loss, gain and radiation pattern in WLAN bands were measured.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.192-206
• /
• 2005

Integration of mobile networks and Internet has started with 2.5 generation of mobile cellular networks. Internet traffic is today dominant traffic type worldwide. The hanger for higher data rates needed for data traffic and new IP based services is essential in the development of future wireless networks. In such situation, even 3G with up to 2 Mbit/s has not provided data rates that are used by Internet users with fixed broadband dial-up or through wired local area networks. The solution to provide higher bit rates in wireless access network has been found in wireless LAN although initially it has been developed to extend wired LAN into wireless domain. In this paper, we propose and describe a solution created for interoperability between mobile cellular network and WLAN. The integration between two networks, cellular and WLAN, is performed on the authentication, authorization, and accounting, i.e., AAA side. For that purpose we developed WLAN access controller and WLAN AAA gateway, which provide gateway-type access control as well as charging and billing functionalities for the WLAN service. In the development process of these elements, we have considered current development stadium of all needed network entities and protocols. The provided solution provides cost-effective and easy-to-deploy PLMN-WLAN Internetworking scenario.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.619-628
• /
• 2012

The ZigBee network has been considered to monitor electricity usage of home appliances in the smart grid network. ZigBee, however, may suffer from a coexistence problem with wireless local area network (WLAN). In this paper, to resolve the coexistence problem between ZigBee network and WLAN, we propose a new protocol constructing a cognitive smart grid network for supporting monitoring of home appliances. In the proposed protocol, home appliances first estimates the transmission timing and channel information of WLAN by reading request to send/clear to send (RTS/CTS) frames of WLAN. Next, based on the estimated information, home appliances transmit a data at the same time as WLAN transmission. To manage the interference between WLAN and smart grid network, we propose a cognitive beamforming algorithm. The beamforming algorithm is designed to guaranteeing zero interference to WLAN while satisfying a required rate for smart metering. We also propose an energy efficient rate adaptation algorithm. By slowing down the transmission rate while satisfying an imperceptible impact of quality of service (QoS) of the receiver, the home appliance can significantly save transmit power. Numerical results show that the proposed multiple antenna technique provides reliable communications for smart metering with reduced power comparing to the simple transmission technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.65-67
• /
• 2015

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for microstrip patch antenna ($29mm{\times}29mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) with $45mm{\times}45mm$. In order to obtain a wide band characteristic, the cutting process was 3.2mm diagonal corners of the patch antenna located on the top of the substrate. Antenna feeding position for 50 ohm impedance matching was decided to be 5.1mm at the central axis in the horizontal direction. As a result, frequency bandwidth satisfying the condition of VSWR<2dB was 2.365-2.45GHz (85MHz, 3.53%) for considering WLAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.77-78
• /
• 2016

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for meandered type patch antenna ($20mm{\times}20mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) size of $20mm{\times}60mm$. Antenna parameters was calculated by using the OpenFDTD simulator. As a result, frequency bandwidth satisfying the condition of VSWR(2:1) was 1.82-3.05GHz (1.23GHz, 44.6%) for considering WLAN.