• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.615-626
• /
• 2003

The applied model for this study area is WINFLOW using mite element method, It is thought that the simulation result by WINFLOW model under the steady flow state reflects well the ground water distribution within the reliability level which shows the error range of 1.1% to 8.0% from the comparison between the computed values and the observed, and analyzed that the constant head distribution is shown along the east-west direction and gentle and stable head gradient along the north-south direction. Ground water of the study area shows stable movement from the south to the stream area, and the particle trace for each location shows relatively linear shape from the upstream to the pumping location while the radius of influence according to the pumping amount shows a significant difference at the down stream area from the pumping location. The simultaneous pumping from P and P1 shows more complicated appearance, not the increase of the radius of influence than pumping from a single well P or P1, and it is analyzed that the particle path takes nearly linear form. It is known that the flow direction of the ground water and the velocity of the flow affect on the magnitude of the radius of influence of the wells from the fact that the more decreasing pattern of the ground water head is observed at the side of the well and the down stream area than the upstream area when the ground water moves from south to north regarding the radius of influence according to the pumping amount. Satisfactory results in analyses of ground water movement are obtained through the significant reduction of the physical uncertainties in the flow system as well as the relatively convenient model application using WINFLOW model which is proposed in this study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.3
• /
• pp.103-115
• /
• 2003

This study examines groundwater movement system analysis and movement forecast algorithm using finite element method. The target is Cheongha-myeon area, Bukgu, Pohang-city which has many difficulties in water supply during drought period. From the comparison of the differences between obtained values by WINFlOW model and observed values, it is thought that groundwater head distribution under steady flow is reflected well at the level of reliability Groundwater movement of study area shows stable pattern from western watershed to eastern coastal area while flow path is dense and steep in the center of the coastal area. The results of particle tracing for each well show a comparatively straight line from the western boundary side to the observation position at the upper area of the well, and are analyzed as it diffuses according to getting closer to the coast at the lower area of the well. The result of effect circle examination attendant on pumping amount in study area shows variation tendency that groundwater head decreases at the side and the lower area more than at the upper area of the well when groundwater flows from west to east(coast). As mentioned above, satisfactory results of groundwater movement analysis using WINFlOW model, two dimensional groundwater movement analysis model, are obtained through the great decrease of physical uncertainty of groundwater movement system.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.561-569
• /
• 2007

This study used SCS-CN method to estimate the real recharge of the study area which is one of the most reasonable techniques to estimate groundwater recharge when there is no available runoff data in a watershed. From the results of tile real recharge analysis for the study area using SCS-CN method, it was analyzed that the year 1994 when the drought was severe shotted the lowest recharge of 106.3mm with recharge rate of 12.4%, and the highest recharge of 285.6mm with recharge rate of 21.8% occurred in 1990. Yearly average recharge of 213.2mm was obtained, and tile average recharge rate was 16.9%/year. KOG-FLOW model which has powerful post process functions consists of setting environments for input parameters in Korean language, and help function is added to each input data. Detailed information for each parameter is displayed when the icon is placed on the input parameters, and geologic boundaries or initial head data for each layer can be set easily on work sheet. The relative errors (R. E.) for each model's observed values and calculated values are $0.156{\sim}0.432$ in case of KOG-FLOW, and $0.451{\sim}1.175$ in case of WINFLOW, therefore it is known that KOG-FLOW model developed in this study produced results compared to observed head values.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.391-396
• /
• 2003

정류상태하에서의 WINFLOW 모델에 의한 모의발생 결과치는 산정된 계산치와 관측치의 오차백분율(0.011~0.080의 범위)를 비교해 볼 때 지하수두 분포를 신뢰도 수준에 있어 잘 반영하고 있는 것으로 판단되며 동서방향으로는 일정 수두분포, 남북방향으로는 완만하고 안정된 수두경사를 이루는 것으로 분석되었다. 분석유역에서의 지하수 유동은 남측에서 하천지역으로 안정된 유동형태를 보이고 있으며, 각 지점에 대한 입자추적은 상류에서 양수지점까지 비교적 직선에 가까운 형태를 보이고 있으나 양수지점의 하류부에서는 양수량의 크기에 따라 영향반경도 많은 차이를 나타내었다. P 및 Pl관정의 동시 양수인 경우에는 P지점 또는 Pl지점의 단일정일 경우보다 영향반경의 크기가 증가한 것 보다는 다소 복잡해진 양상을 보였으며 입자경로는 직선에 가까운 형태를 가지는 것으로 분석되었다. 양수량에 따른 영향원을 살펴보면 지하수가 남측에서 북측(병성천)으로 유동할 경우에 상류부보다 관정 측면과 하류부에서 더욱 크게 지하수두가 감소하는 변화경향을 나타내어 지하수유동방향 및 유속이 관정의 영향원 분포에 많은 영향을 미치고 있음을 알 수 있었다.