• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.181-188
• /
• 2006

The data, methodology, and the resulting accurate gravimetric geoid model for the Korean Peninsula (latitude from 32˚ N to 40˚ N and longitude from 124˚ E to 131˚ E) are presented in this study. The types of used data were a high degree geopotential model (the EGM96 spherical harmonic coefficient set), a set of 12,615 land gravity observations, 1,056,075 shipborne gravity observations, and KMS2002 gravity anomalies from satellite altimetry. The remove-restore technique was successfully applied to combining the above mentioned data sets using up to degree and order 112 of the EGM96 coefficient. The residual geoid was calculated with residual Free-Air anomaly values using the spherical Stokes' formula with a 37-km integration cap radius. The geoid model was referred to WGS84 geodetic system and was tested using a set of GPS/levelling geoid undulations. The absolute accuracy is 0.132 m and some improvement compared to the PNU95 geoid model was found.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.1
• /
• pp.11-20
• /
• 2022

PURPOSE: A gait assessment is an important component of the rehabilitation process, and observational gait assessment (OGA) is used routinely in clinical settings. This study examined the association of OGA tools with the independent walking ability in stroke patients to determine a cutoff value of the OGA tool according to independence levels of stroke patient gait. METHODS: Two hundred ten hemiparetic stroke patients participated in the study. The independence of gait was identified using the Functional Ambulation Category (FAC) classifications. The walking ability was assessed using OGA tools (Rivermead Visual Gait Assessment [RVGA], Wisconsin Gait Scale [WGS], Tinetti Gait Scale [TGS], and Functional Gait Analysis [FGA]). RESULTS: Stepwise multiple regression analysis showed that among the OGA tools, the FGA correlated with the FAC. The FGA explained approximately 77% of the variance in FAC. In distinguishing the independence levels, the cutoff values were as follows: between FAC 1 and FAC 0 was .5 points; between FAC 2 and lower levels, 5.5; between FAC 3 and lower levels, 11.5; between FAC 4 and lower levels, 14.5; and between FAC 5 and lower levels, 18.5. Items 1, 2, 3, and 10 were identified as explaining most of the variance in the FGA in the stepwise multiple regression. CONCLUSION: The present study found that the FGA is an assessment tool related to the level of gait independence after stroke. Furthermore, the FGA total score can serve as an index of the increase in independence level after stroke.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.455-455
• /
• 2023

본 연구에서는 도시홍수 피해 저감 및 회복을 위한 도시홍수 연관 데이터 가시화 및 GIS 기반 LoD 1 수준 가시화 기술 개발을 진행하였다. 도시홍수는 불투수지역의 증가로 인한 첨두 홍수의 증가 및 도달 시간의 단축, 도시 내수배제의 불량으로 인한 주택지 및 상가 공장지 등의 침수에 의한 피해가 발생하는 현상이며, 도시홍수 예측 모델을 수행하기 위하여 수집한 기상, 하천 및 수자원, 토양 등의 데이터를 2차원 가시화하고 도심 지역의 지형 DEM(Digital Elevation Model) 데이터 및 건축물 DSM(Digital Surface Model) 데이터를 기반으로 3D 가시화를 진행하였다. 기상, 하천 및 수자원 관측 등의 데이터를 실시간으로 수집하며 관련 데이터를 도시홍수 디지털 트윈 플랫폼의 수문기상정보를 통하여 가시화 제공하며 토양 및 지리정보는 WMS 레이어를 기반으로 2D 가시화한다. 건축물 데이터의 경우 GIS 정보를 기반으로 하는 3D 객체 배치를 위하여 WGS84 타원체를 활용하여 EPSG:4326 좌표계를 적용하여 가시화하였다. 건축물 가시화는 PostgreSQL로 구축된 데이터를 Geoserver를 활용하여 자동으로 층 정보를 통한 건축물의 높이를 계산하도록 하였으며, CesiumJS를 적용하여 웹 기반 도시홍수 디지털 트윈 플랫폼을 개발하였고 추후 LoD 3 수준으로의 확대 적용 기반을 마련하였다.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.23 no.2
• /
• pp.1-7
• /
• 2023

Inherited metabolic disorders (IMD) are a group of disorders involving various metabolic pathways. Genetic diagnosis of IMD has been challenging because of extremely heterogeneous nature and extensive laboratory and/or phenotype overlap. Conventional genetic diagnosis was a gene-by-gene approach that needs a priori information on the causative genes that might underlie the IMD. Recent implementation of next-generation sequencing (NGS) technologies has changed the process of genetic diagnosis from a gene-by-gene approach to simultaneous analysis of targeted genes possibly associated with the IMD using gene panels or using whole exome/genome sequencing (WES/WGS) covering entire human genes. Clinical NGS tests can be a cost-effective approach for the rapid diagnosis of IMD with genetic heterogeneity and are becoming standard diagnostic procedures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.425-430
• /
• 2012

In this study, a preconverter of an MCFC for an emergency electric power supplier is numerically simulated to increase the hydrogen production from natural gas (methane). A commercial code is used to simulate a porous catalyst with a user subroutine to model three dominant chemical reactions-steam reforming, water-gas shift, and direct steam reforming. To achieve a fuel conversion rate of 10% in the preconverter, the required external heat flux is supplied from the outer wall of the preconverter. The calculated results show that the temperature distribution and chemical reaction are extremely nonuniform near the wall of the preconverter. These phenomena can be explained by the low heat conductivity of the porous catalyst and the endothermic reforming reaction. The calculated results indicate that the use of a compact-size preconverter makes the chemical reaction more uniform and provides many advantages for catalyst maintenance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.209.2-209.2
• /
• 2010

최근 정부의 녹색성장 정책, 고유가시대 도래, 온실가스 감축 의무화, 폐기물 해양배출 강화 등으로 인해 폐기물의 자원화에 대한 관심이 고조되고 있다. 국내에서 발생되는 가연성폐기물을 기존의 감량처리 대신 가스화 공정을 적용하여 합성가스로 전환할 경우 환경친화적이고 고효율의 에너지 회수가 가능하게 된다. 폐기물 가스화를 통해 얻어진 합성가스는 난방, 가스엔진 및 연료전지를 이용한 전기생산과 DME, SNG등의 합성연료유 제조에 활용될 수 있으며, WGS 반응 및 PSA 방법에 의해 수소를 얻을 수 있다. 이와 더불어 최근에는 메탄올과 CO의 합성을 통해 얻어지는 초산제조 공정에서의 원료로서 폐기물 가스화를 통한 합성가스 내의 CO를 활용하는 방안이 연구되고 있다. 이는 기존 초산 제조공정에서 CO를 생산하기 위해 소모되는 고가의 석유계(납사, 중질유) 원료를 절감할 수 있어 경제적으로 장점을 가지고 있다. 이를 위해서는 폐기물 가스화에서 발생된 합성가스 내에 포함된 금속성분, 분진등의 오염물질의 농도가 후단공정에 영향을 주지 않아야 하며, 초산제조공정의 안정적인 운전을 위해 합성가스의 CO, $H_2$ 조성 변화폭이 ${\pm}5%$이하로 유지되어야 하는 기술적인 문제를 해결해야 한다. 따라서 본 연구에서는 폐기물 가스화 시스템의 운전특성을 통해 환경성, 기술성, 경제성을 분석 평가 할 수 있도록 구성된 분석 프레임워크를 이용하여, 초산제조공정에 적용하기위한 상용급 폐기물 가스화 시스템의 특성을 비교 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.111.1-111.1
• /
• 2010

This paper focuses on a systematic configuration of steam reforming fuel processor, particularly designed for small and medium sized hydrogen production application. In a typical integration of the fuel processor, there exist significant temperature gradients over the entire system which has negative effect on both catalyst life-time and system performance. Also, the volumetric inefficiency should be avoided to obtain the possible compactness for the commercial purpose. In the present work, the computational analysis will be performed to gain the fundamental insight on the transport phenomena and chemical reactions in the reformer consisting of preheating, steam reforming (SR), and water gas shift (WGS) reaction beds in the flow direction. Also, the fuel processing system includes a top-fired burner providing necessary thermal energy for endothermic catalytic reactor. A fully two-dimensional numerical modeling for a integrated fuel processing system is introduced for in-depth analysis of the heat and mass transport phenomena based on surface kinetics and catalytic process. In the model, water gas shift reaction and decomposition reaction were assumed to be at equilibrium. A kinetic model was developed and then computational results were compared with the experimental data available in the literature. Finally, the case study was done by considering the key parameters, i.e. steam to carbon (S/C) ratio and temperature. The computer-aided models developed in this study can be greatly utilized for the design of advanced fast-paced compact fuel processors research.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.727-735
• /
• 2014

For improved sustainability of the biorefinery industry, biorefinery-byproduct glycerol is being investigated as an alternate source for hydrogen production. This research designs and optimizes a hydrogen-production process for small hydrogen stations using steam reforming of purified glycerol as the main reaction, replacing existing processes relying on steam methane reforming. Modeling, simulation and optimization using a commercial process simulator are performed for the proposed hydrogen production process from glycerol. The mixture of glycerol and steam are used for making syngas in the reforming process. Then hydrogen are produced from carbon monoxide and steam through the water-gas shift reaction. Finally, hydrogen is separated from carbon dioxide using PSA. This study shows higher yield than former U.S. DOE and Linde studies. Economic evaluations are performed for optimal planning of constructing domestic hydrogen energy infrastructure based on the proposed glycerol-based hydrogen station.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.9
• /
• pp.709-717
• /
• 2009

Heat transfer rate is a very important factor for the performance of a steam reformer because a steam reforming reaction is an endothermic reaction. Coaxial cylindrical reactor is the reactor design which can improve the heat transfer rate. Temperature, fuel conversion and heat flux in the coaxial cylindrical steam reformer are studied in this paper using numerical method under various operating conditions. Langmuir-Hinshelwood model and pseudo-homogeneous model are incorporated for the catalytic surface reaction. Dominant chemical reactions are assumed as a Steam Reforming (SR) reaction, a Water-Gas Shift (WGS) reaction, and a Direct Steam Reforming (DSR) reaction. Although coaxial cylindrical steam reformer uses 33% less amount of catalyst than cylindrical steam reformer, its fuel conversion is increased 10 % more and its temperature is also high as about 30 degree. There is no heat transfer limitation near the inlet area at coaxial-type reactor. However, pressure drop of the coaxial cylindrical reactor is 10 times higher than that of cylindrical reactor. Operating parameters of coaxial cylindrical steam reformer are the wall temperature, the inlet temperature, and the Gas Hourly Space Velocity (GHSV). When the wall temperature is high, the temperature and the fuel conversion are increased due to the high heat transfer rate. The fuel conversion rate is increased with the high inlet temperature. However, temperature drop clearly occurs near the inlet area since an endothermic reaction is active due to the high inlet temperature. When GHSV is increased, the fuel conversion is decreased because of the heat transfer limitation and short residence time.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.116-121
• /
• 2011

This study was conducted to develop a robust navigator which could be in positioning for precision farming through developing a plural GPS receiver with 4 sets of GPS antenna. In order to improve positioning accuracy by integrating GPS signals received simultaneously, the algorithm for processing plural GPS signal effectively was designed. Performance of the algorithm was tested using a simulation program and a fixed point on WGS 84 coordinates. Results of this study are aummarized as followings. 1. 4 sets of lower grade GPS receiver and signals were integrated by kalman filter algorithm and geometric algorithm to increase positioning accuracy of the data. 2. Prototype was composed of 4 sets of GPS receiver and INS components. All Star which manufactured by CMC, gyro compass made by KVH, ground speed sensor and integration S/W based on RTOS(Real Time Operating System)were used. 3. Integration algorithm was simulated by developed program which could generate random position error less then 10 m and tested with the prototype at a fixed position. 4. When navigation data was integrated by geometrical correction and kalman filter algorithm, estimated positioning erros were less then 0.6 m and 1.0 m respectively in simulation and fixed position tests.