• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.195-203
• /
• 2016

Heavy metals have been analyzed on the non-woven from the 24 kinds of wet wipes and 8 kinds of mask packs. The following materials used in the non-woven according to each product are: rayon+polyester for the 12 wet wipe products, rayon+PET for the 5 wet wipe products, and rayon, cotton, rayon+polyester+cotton, pulp+polypropylene for the rest of the wet wipe products. No further information on the materials was found on the 3 wet wipes and 8 mask packs. However, polyester may be applied for the non-woven in wet wipes, because PET is part of the polyester group. The heavy metals analysis in the 24 kinds of wet wipes and 8 kinds of mask packs revealed the following: arsenic was found from $47.14{\pm}1.13$ to $71.75{\pm}1.64{\mu}g/L$ on the 3 products, the amount of nickel in the 2 products were $261.26{\pm}5.14$ and $1,242.63{\pm}43.71{\mu}g/L$, $53.69{\pm}1.45$ and $103.52{\pm}2.02mg/L$ on the 2 mask packs. It was also revealed that lead was detected from $7.23{\pm}0.32$ to $55.67{\pm}1.46{\mu}g/L$ on the 6 wet wipes, antimony was ranged from $187.86{\pm}5.24$ to $19,558.35{\pm}3,537.30{\mu}g/L$ on the 12 wet wipes, and $5.25{\pm}0.25$ and $8,936{\pm}55.22{\mu}g/L$ on the 2 mask packs. No cadmium, mercury, or thallium were detected from all the products. A high concentration of antimony might come from antimony trioxide, which was used as a catalyst when manufacturing the polyester. Therefore, it is strongly recommended that a non-woven used for cosmetic purposes should not use heavy metals as a catalyst when manufacturing, and it's important to clarify which materials are used in non-woven.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.269-281
• /
• 2023

In this study, we evaluate the effect of gelatin coating and sonication of wet-aged pork loin on quality. The moisture content of wet-aged pork loin with sonication and gelatin coating was the highest in the G5S sample (5% gelatin coating and sonication), while the moisture content of wet-aged pork loin with sonication was higher than that without sonication. The pH of wet-aged pork loin with sonication was lower than that without sonication. The aging loss of 5% gelatin coating with sonication was significantly lower than that of G0 (control), while the cooking loss was the lowest in G0 wet-aged pork loin. The water holding capacity of the wet-aged pork loin was the highest in G1. The thiobarbituric acid reactive substances value of wet-aged pork loin was significantly decreased with coating and not affected by sonication. The gelatin coating and sonication treatment significantly increased the myofibrillar fragmentation index of the samples. Shear force of wet-aged pork loin significantly decreased as the samples were gelatin-coated and sonicated. The myofibrillar and total protein solubilities were not significantly different between samples. In conclusion, the 1% gelatin coating with sonication can enhance the quality of wet-aged pork loin.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.77-84
• /
• 2023

Simulating the cohesion and stiffness of wet hair or fur in physics-based simulations is one of the most challenging problems. Wet hair or fur is characterized by bunching and stiffening at the ends, a phenomenon that can be seen in wet animal fur or hair. In addition, when wet hair interacts with a solid, adhesion occurs, but this problem becomes difficult to solve due to the different distribution and balance of forces in curly hair. In traditional methods, wet hair is represented by hand or by using static hairstyles to represent wet curls and hair. However, how to depict the details of wet curly hair has not been actively researched. In this paper, we propose a new algorithm to efficiently model the curl exaggeration, cohesion, adhesion, and stiffness of wet curly hair. The proposed method efficiently simulates cohesion and integrates stiffness constraints with curl dynamics to reliably control hair elasticity.

• The Korean Journal of Community Living Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2000

The characteristics of rice-breads with wet-milling and dry-milling rice-flours were investigated. Rice-breads by wet-milling had a good fermentation than the breads by dry-milling. Also, the fermentation of mugwort rice-breads was lower than those. Rice-breads by dry-milling indicated the higher value in hardness and the lower value in springiness, cohesiveness and chewiness than rice-breads by wet-milling. Also, mugwort rice-breads was the higher value in hardness, springiness, chewiness and the lower value in cohesiveness than rice breads. The test of the sensory characteristics for rice-breads showed that moistness, springiness, chewiness was higher for rice-breads by wet-milling. The sensory characteristics of mugwort rice-breads were lower than those, of rice-breads except the chewiness. Overall quality of rice-breads by wet-milling was higher than that of rice-breads by dry-milling. The overall quality of mugwort rice breads was higher than that of rice-breads by wet-milling, but lower than that of rice-breads by dry-milling.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.518-523
• /
• 2006

Wet wire drawing of brass coated steel wire, used for tire reinforcement, is realized with Tungsten Carbide(WC) dies sintered with a cobalt(Co) binder. Dies wear represents an important limitation to the production process and cost savings. Several parameters, such as Co content, WC grain size of tungsten carbide, sintering conditions, and so on, affect on the wear of the drawing die. In this study, the effect of the diamond abrasive particle size on the life of the WC centered dies of the wet wire drawing was investigated. Wet wire drawing experiments were carried out on a wet wire drawing machine. From the experiments, the dies life, dies fracture, wire surface roughness, and wire breaks were investigated. From the results, it was found that the wear of the WC dies increased with the increase in the diamond abrasive particle size.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.30 no.2
• /
• pp.75-80
• /
• 2015

The wet spinning of silk solution has attracted researchers' attention because of 1) unique properties of silk as a biomedical material and 2) easy control of the structure and properties of the regenerated silk fiber. Recently, studies have reported that different silkworm varieties produce silk with differences in the molecular weight (MW) and other mechanical properties of the regenerated silk fibroin (SF) film. In this study, we look at the effect of different Bombyx mori varieties on the wet spinning of SF. Although five regenerated SFs from different silkworm varieties have different MWs and solution viscosity, the wet spinnability and post drawing performance of regenerated SFs were not different. This result is due to low variability in the MW of the regenerated SF samples from the different silkworm varieties. In addition, unlike regenerated SF films, the mechanical properties of wet spun regenerated SF filament were not affected by silkworm variety. This result suggests that the mechanical properties of wet spun SF filament are less affected by MW than those of SF film are.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.1
• /
• pp.181-185
• /
• 2009

In this paper, the regenerated silk fibroin (SF)/hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.457-464
• /
• 1998

A drying speed control system using fuzzy logic was developed in order to minimize the damage of rice quality for a large capacity continuous dryer. The performance of the system was tested at two object moisture content of 17% and 25% on a wet basis. For object moisture content of 17% on a wet basis, the final output moisture contents from 20.46%, 20.96%, 18.98% on a wet basis were 17.99%, 17.6% and 17.23% on a wet basis, respectively. For object moisture content of 25% on a wet basis, the final output moisture contents from 28.85%, 26.95%, 28.11%, 27.8% on a wet basis were 25.24%, 24.9%, 25.23% and 25.09% on a wet basis, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.71-77
• /
• 2002

The Production of fine wire through wet wire drawing process with appropriate pass schedule would be impossible without understanding of relationship among many process parameters. Therefore, this paper investigates the relationship among process parameters of wet wire drawing process. In this study, it is possible to obtain the important basic data that can be used in the pass schedule of multi-pass wet wire drawing process. In order to verify the effectiveness of the analysis, pass redesign was performed based on the result of analysis to reduce the wire breakage. The wire breakage between the conventional pass schedule and the redesigned pass schedule was compared by the FE analysis and the wet win drawing experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.214-220
• /
• 2011

This paper studies about the assessment of thermal performance between wet ondol system and electric ondol system. Electrical ondol systems shows faster warm-up time, higher floor surface temperature distribution and lower power consumption than wet ondol system. However, if we provide heat regularly wet ondol system which has more heat capacity shows greater thermal storage than electric ondol system. Therefore, we could conclude that wet ondol system which keeps temperature regularly by the thermal storage show better energy-efficiency in case of using the central heating and district heating system. However, Electrical ondol system shows better efficiency in case of using the space during short time or individual heating systems which needs to heat quickly. The Experiment says that electric ondol system has more benefits on timing to reach the set temperature and energy-efficiency than wet ondol system.