• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.2
• /
• pp.106-114
• /
• 2017

There is an increasing concern over heavy metal(loid) contamination of soil in agricultural areas including paddy soils. This study was conducted to determine the bioconcentration factor (BCF) for heavy metal(loid)s to brown rice grown in paddy soils vulnerable to heavy metal(loid)s contamination, for the quantitative health risk assessment to the residents living nearby the metal contaminated regions. The samples were collected from 98 sites nationwide in the year 2015. The mean and range BCF values of As, Cd, Cu, Ni, Pb, and Zn in brown rice were 0.027 (0.001 ~ 0.224), 0.143 (0.001 ~ 2.434), 0.165 (0.039 ~ 0.819), 0.028 (0.005 ~ 0.187), 0.006 (0.001 ~ 0.048), and 0.355 (0.113 ~ 1.263), respectively, with Zn showing the highest. Even though the relationship between heavy metal(loid) contents in the vulnerable soils and metal contents in brown rice collected at the same fields was not significantly correlated, the relationship between log contents of heavy metal(loid)s in the vulnerable soils and BCF of brown rice wes significantly correlated with As, Cd, Cu, and Zn in rice. In conclusion, soil environmental risk assessment for crop uptake should consider the bioconcentration factor calculated using both the initial and vulnerable heavy metal(loid) contents in the required soil and the crop cultivated in the same fields.

• Restorative Dentistry and Endodontics
• /
• v.16 no.2
• /
• pp.143-154
• /
• 1991

The purpose of this study was to evaluate the sealing ability of five obturation methods in conjunction with sealer. Fifty extracted upper and lower anterior teeth were selected and the access cavities were prepared lingually with a round bur. The working length was determined with a #15K file, and the root canals were instrumented with a #40K file 1mm short of the apical foramen. The apical third of root canal was flared by step-back technique and the coronal two thirds of root canal using #2 - 3 Gates Glidden drills. And then, the teeth were randomly assigned to five groups of 10 teeth each. A thin coat of Tubliseal was placed into the canal into the canal using the # 35 reamer and the canals were filled by lateral condensation, vertical condensation, ultrasonic activated lateral condensation, ULTRAFIL injecting, and McSpadden compaction methods. All teeth were stored in 100 % relative humidity at 31c for 48 hours. The roots were suspended in 2 % methylene blue solution for 48 hours, left to dry for 24 hours and then, half side of root was removed longitudinally using the fissure bur. A Boley gauge wes used to measure the distance, to the nearest 0.1mm, from the apical foramen to the most coronal level of dye penetration. The measurement of dye penetration was statistically compared by Duncan's multiple range test The results were as follows 1. Ultrasonic group showed the best sealing ability among the all experimental groups, but there were statistically no significant difference in the sealing ability between ultrasonic group and vertical condensation group. 2. There were no statistically significant difference in the sealing ability among the lateral, vertical, and ultrasonic groups. 3. McSpadden group showed the worst sealing ability among the all exprimental groups.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.2
• /
• pp.135-145
• /
• 2017

This study is a secondary study that is a cyclic seismic test of High depth hybrid composite beam and column connection after the primary bending strength test of a high depth Hybrid composite beam. Total of 3 seismic test specimens were prepared to cyclic test. The bracket and beam web spliced by high strength bolt and the bracket and beam upper flange was spliced by welding. Test results showed that the seismic strength was higher than the plastic moment($M_p$) in the positive negative moment section, the requirement of composite intermediate moment frame wes satisfied. Therefore, the requirement of intermediate moment frame can be secured by applying the details of connection of this study results.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.7-13
• /
• 2020

For one decades, mobile devices components were made with plastic material, but environmental problems have recently replaced them with metal materials such as aluminum. Generally, aluminum components are mostly produced through cutting, but this process has limitations such as productivity and chip recycling. For this reason, many researches are conducted to improve productivity by replacing with the forging press process for manufacturing mobile device components. After forging process, the flash is remained and it is necessary to eliminate the flash from the final shape of components. In this paper, one-sided clearance for blanking aluminum material wes selected for parameter affected to the dimensional precision. Because the clearance is the most important parameter in blanking process. Deriving the clearance of blanking process for high dimensional precision, five level of one-sided clearance is selected and CAE is used to analyze the dimensional precision for each case.

• Korean Journal of Adult Nursing
• /
• v.12 no.1
• /
• pp.77-87
• /
• 2000

This study tried to suggest the basic materials that can be efficiently applied in clinical cases by understanding problems through a content analysis of an adult nursing assessment tool and opinion agreement about nurse's practical usage presently used in the hospital. The study was carried out in 36 attached hospitals in nationwide universities from May to December, 1999, the two hundred and twenty five reports were for analysis. The contents of the collected nursing assessment tool were analyzed. It was found that the tool had been used with various names and content and there were instances of partial omission of a number of items, such as documentation and time records. Other results revealed that they mostly had a systematic classification of items, formation of details a form of a check list, and the effect of saving time. In spite of the adult nursing assessment tool, it was suggested that its style be subdivided according to the specialized of a department and that standardized style be amended and supplemented. The respondents also answered that there had to be education about continuous and sufficient health assessment skills on the physical examination record. The most frequently suggested items to be added were: past history, marital status, patient and caregiver's address and telephone number. It was found that a patient's education career, economic status, religion, hygienic practice, sexual life and hobby were the most frequently omitted items on record. The reason given wes because the items were associated with his/her privacy. These results highlight the importance of analyzing the content with an complete data collection, supplying basic content for a more accurate nursing record, computerization, sharing information and standardization of the form.

• Journal of Korean Academy of Nursing
• /
• v.36 no.5
• /
• pp.837-844
• /
• 2006

Purpose: This study was done to identify fat distribution and blood pressure according to anthropometric change patterns between NIDDM patients and control subjects. Methods: Cross-sectionally 167 NIDDM patients and 87 controls were studied. Previous maximal body weight and acute weight loss was obtained. Current height, body weight, BMI, waist-hip ratio(WHR), skinfold thicknesses(abdomen, subscapular & triceps), and blood pressure was measured. Three anthropometric change patterns were categorized by BMI changes from the maximum lifetim's BMI to the current time (obese-obese, obese-nonobese and nonobese-nonobese: obese: BMI$\geq$25kg/m$^2$, nonobese: BMI<25kg/m$^2$). The data was analyzed by $X^2$, t-test, age adjusted ANCOVA and Least Squares Means(LSM) for multiple comparison. Result: Acute body weight loss(p=0.01), anthropometric change types (p=0.001), WHR (p=0.05), and skinfold thickness (p=0.002) of NIDDM were significantly higher than those of the controls. The mean arterial pressure, WHR and skinfold thicknesses were greater in both obese-obese and obese-nonobese NIDDM and control subjects compared with both nonobese-nonobese NIDDM and control subjects. (all p's<0.05). Conclusion: NIDDM patients had more central and upper body adiposicity. Also both obese-obese and obese-nonobese NIDDM and control subjects had higher mean arterial pressures and central body obesity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2129-2132
• /
• 2012

Objective: To explore improved treatment by retrospectively comparing survival time of gemcitabine-based concurrent chemoradiotherapy (GemRT) versus chemotherapy (Gem) alone in patients with locally advanced pancreatic cancer (LAPC). Methods: From January 2005 to June 2010, 56 patients with LAPC from Subei People's Hospital were treated either with Gem (n=21) or GemRT (n=35). Gem consisted of 4-6 cycles gemcitabine alone (1000 mg/m2 on Days 1, 8, 15, 28-day a cycle). GemRT consisted of 50.4Gy/28F radiotherapy with concurrent 2 cycles of gemcitabine (1000 $mg/m^2$ on days of radiation 1, 8, 15, 21-day a cycle). Radiation was delivered to the gross tumor volume plus 1-1.5 cm by use of a three-dimensional conformal technique. The follow-up time was calculated from the time of diagnosis to the date of death or last contact. Kaplan-Meier methodology wes used to evaluate survival. Results: Patient characteristics were not significantly different between treatment groups. The disease control rate and the objective response rate of GemRT versus Gem was 97.1% vs 71.4%, 74.3% vs 38.1%. The overall survival (OS) was significantly better for GemRT compared to Gem (median 13 months versus 8 months; 51.4% versus 14.3% at 1 year, respectively). Conclusion: Radiation therapy at 50.4Gy with 2 concurrent cycles of gemcitabine results in favorable rates of OS. Concurrent chemoradiotherapy should be the first choice for patients with LAPC.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.105-112
• /
• 2000

Using a commercial epoxy/carbon fiber composite prepreg (DMS 2224) as a model system, the cure kinetics of vitrifying thermoset system were analyzed by isothermal and dynamic-heating experiments. Focusing on the processing condition of high performance composite systems, a phenomenological kinetic model was developed by using differential scanning calorimetry (DSC) and reaction kinetics theories. The model system exhibited a limited degree of cure as a function of isothermal temperature seemingly due to the diffusion-controlled reaction rates. The diffusion-controlled cure reaction was incorporated in the development of the kinetic model, and the model parameters were determined from isothermal experiments. The first order reaction was confirmed from the characteristic shape of isothermal cure thermograms, and the activation energy wes 78.43 kJ/mol. Finally, the proposed model was used to predict a complex autoclave thermal condition, which was composed of several isothermal and dynamic-heating stages.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.537-542
• /
• 1998

to more effectively drive immune responses toward antigen-specific T helper type 2 (Th2) cell-mediated responses, we constructed a mammalian expression vetor (oPVA/IL4) carrying a fused gene in which the ovalbumin (OVA) cDNA was covalently linked to murine interleukin-4 (IL-4) cDNA. A biologically active OVA/IL4 DNA, as demonstrated by Wes tern blotting and cytokine bioassay. In tramuscular injection of BALB/c mice with the pOVA/IL4 DNA increased both the production of OVA-specific IL-4 by CD$4^{+}$ T cells and the ratio of anti-OVA lgG1 to anti-OVA lgG2a isotypes, while the injection with the pOVA DNA alone, or with the mixture of the pOVA and pIL4 DNA did no or little increase. furthermore, the OVA-specific, Th2 cell-mediated immune responses were significantly enhanced by multiple injections with the pOVA/IL4 DNA. These studies indicate that the direct linkage of an OVA gene to an IL-4 gene in the expression plasmid confines the effects of IL-4 to the OVA-specific cells, efficiently driving the immune response toward OVA-specific, Th2 cell-mediated responses.

• The Korean Journal of Mycology
• /
• v.19 no.2
• /
• pp.148-155
• /
• 1991

Fungal ochratoxin A wes extracted and measured from the Korean traditional and fermented soybean foodstuffs (12 samples of Maeju, 28 samples of Dwangjang and 28 samples of Kangjang) collected from the whole nation wide regions. The various fungi were isolated from the foodstuffs and they were also examined whether the isolates produce ochratoxin A (OA) under the artificial conditions or not. Determinations of OA produced by the fungi were done with the antibody-attached CIA method, which was accurate or sensitive at the range of 20 pg per sample with a ninty percent recovery. Out of the 222 fungal isolates, 39 isolates produced the OA under the artificial conditions, and were identified as species of Aspergillus, Penicillium, Paecilom­yces or other genera. The OA detected in all soybean foodstuffs was presumed to be originated from the first fermentation step of maeju.