• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.206-207
• /
• 2005

Display 소재로서 유전체나 격벽재 실링재로 사용되고 있는 frit는 PbO를 주성분으로 갖는 유리가 사용되고 있다. PbO 성분이 함유된(50$\sim$85%) 구성소재는 최근 RoHS 나 WEEE 등의 환경규제 실행에 직면해 있으며, 대체재료의 개발을 위한 많은 연구가 진행되고 있다 PbO 성분을 대체할 성분으로는 $Bi_2O_3$ 계, BaO-ZnO 계, $P_2O_5$ 계 등의 성분이 주요성분으로 이루어져 있으며, PbO 성분을 함유한 유리의 저융점, 저유전율, 고 투과율, 내산성, 내전압, 팽창계수 matching 등의 특성들에 부합되는 재료를 개발하기 위해 많은 노력을 기울이고 있다. 본 연구에서는 SnO-$P_2O_5$ 계 유리 조성을 선택하여 $R_2O_3$의 치환 및 용융분위기의 조절에 따른 저융점 유리로서의 특성과 효과에 대하여 고찰하였다.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.365-370
• /
• 2009

LCA is a tool to support for making decisions by offering information of environmental aspects of products or services. It can be used to make decisions to consumers and NGOs as well as government and enterprises. LCA evaluates the environmental aspects throughout the entire life cycle of a product. Therefore it can quantify and assess environmental impacts from raw material acquisition, manufacturing, distribution, use and disposal to end of life and recycling. The demands of the recycling rate increase and the use of suitable materials for RoHS, REACH, WEEE, ELV which are linked trade with environmental regulation have increased the worldwide. Global warming is the critical challenge of the world facing. And under post-Kyoto protocol each country has to prepare for target reduction, so it became essential to save energy and resources. In addition that, the carbon mark has been run as the way of showing example of CO2 reduction in domestic and it will be extended gradually. And also through the introduction of Eco-label, environmentally-friendly product will be promoted. When those systems are operated, global warming gases (i.e. CO2) can be calculated throughout the entire life of the products by LCA. And the environmental impacts such as harmful material emission in the process of manufacturing, energy consumption, distribution and so on, can also be assessed. Therefore, The basic concepts of LCA technique and various cases and the practical application in the future will be review in this study.

• Management & Information Systems Review
• /
• v.24
• /
• pp.45-71
• /
• 2008

These days the international environmental regulations of the developed countries, especially from the EU, are rapidly changed to the regulations of product-based environment from a conventional end-of-pipe environmental technology. Especially the motive in this paper come from the EU's electrical and electronic equipment environment regulation. It may affect much to whole export of Korea Firms Integrated product policy has the potential to increase not only competitive power in today's global market, but also trade compatibility between countries. Furthermore it is important to make a contribution to sustainable development. CEOs must change their notions about firms' environmental policy from the end-of-pipe approach to the sustainable approach to improve company's competitive power. As emphasized a paradigm of naw environmental management by EU' environmental directives, the company must establish clean production system to save resources and reduces pollutant. Also Korean Company constructs a systematical network to collect EU' environmental regulation information which are changing rapidly. Large company will cooperate with small and medium-sized firm for their win-win strategy in the field of environmental management. Also it is necessary to make the domestic regulations of product-based environment to meet the international environmental regulations.

• Clean Technology
• /
• v.16 no.3
• /
• pp.155-161
• /
• 2010

Product-based environmental regulations, such as RoHS, REACH, EuP, etc., on electrical and electronic equipments, chemicals, and so on, initiated by the European Union, are becoming a global trend. These regulations can create barriers to trade among nations worldwide and may thereby have a direct impact on the function of internal market. If domestic companies utilize well the international environmental regulations in advance, they will get good opportunity for expanding overseas market. In this paper the current status of countermeasure for overcoming the international environmental regulations in domestic industries was investigated and the future plans were discussed.

• Korea Trade Review
• /
• v.46 no.5
• /
• pp.213-230
• /
• 2021

China's e-waste enterprises can decompose 150 million sets of e-waste every year, but in fact, only about 50% of the e-waste goes into formal recycling due to the informal recycling of individual small businesses. The purpose of this paper is to put forward the method for users to improve the reuse times through regular e-waste recycling enterprises. This paper constructs the evaluation factors of reuse logistics service through prior research. Exogenous variables are mainly composed of the management system, economics, resources, policies, social perspectives, and service quality. In addition, the authors choose intention to reuse as an endogenous variable. A total of 335 questionnaires were collected to conduct the research with the structural equation modeling. The results reject the hypothesis that economics, resources, and social perspectives have a positive impact on reuse. On the contrary, management systems, policies, and service quality have a positive impact on reuse. Implications were suggested in the last part of the research.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.75-81
• /
• 2014

Usage of heavy metal element (Pb, Hg and Cd etc.) in electronic devices have been restricted due to the environmental banning of the European Union, such as WEEE and RoHS. Therefore, it is needed to develop the Pb-free solder plated ribbon in photovoltaic (PV) module. This study described that degradation characteristics of PV module under damp heat (DH, $85^{\circ}C$ and 85% R.H.) condition test for 1,000 h. Solar cell ribbons were utilized to hot dipping plate with Pb-free solder alloys. Two types of Pb-free solder plated ribbons, Sn-3.0Ag-0.5Cu (SAC305) and Sn-48Bi-2Ag, and an electroless Sn-40Pb solder hot dipping plated ribbon as a reference sample were prepared to evaluate degradation characteristics. To detect the degradation of PV module with the eutectic and Pb-free solder plated ribbons, I-V curve, electro-luminescence (EL) and cross-sectional SEM analysis were carried out. DH test results show that the reason of maximum power (Pm) drop was mainly due to the decrease fill factor (FF). It was attributed to the crack or oxidation of interface between the cell and the ribbon. Among PV modules with the eutectic and Pb-free solder plated ribbon, the PV module with SAC305 ribbon relatively showed higher stability after DH test than the case of PV module with Sn-40Pb and Sn-48Bi-2Ag solder plated ribbons.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.

• Advances in environmental research
• /
• v.5 no.2
• /
• pp.125-140
• /
• 2016

The paper is focused on the economic analysis of two hydrometallurgical processes for recovery of yttrium and other rare earth elements (REEs) from fluorescent phosphors of spent lamps. The first process includes leaching with sulphuric acid and precipitation of a mixture of oxalates by oxalic acid, the second one includes leaching with sulphuric acid, solvent extraction with D2EHPA, stripping by acid and recovery of yttrium and traces of other rare earths (REs) by precipitation with oxalic acid. In both cases the REEs were recovered as oxides by calcination of the oxalate salts. The economic analysis was estimated considering the real capacity of the HydroWEEE mobile's plant ($420kg\;batch^{-1}$). For the first flow-sheet the cost of recycling comes to $4.0{\euro}kg^{-1}$, while the revenue from the end-product is around $5.40{\euro}kg^{-1}$. The second process is not profitable, as well as the first one, taking into account the composition of the final oxides: the cost of recycling comes to $5.2{\euro}kg^{-1}$, while the revenue from the end-product is around $3.56{\euro}kg^{-1}$. The process becomes profitable if the final RE oxide mixture is sold for nearly $50{\euro}kg^{-1}$, a value rather far from the current market prices but not so unlikely since could be achieved in the incoming years, considering the significant fluctuations of the Res' market.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.17-33
• /
• 2012

In order to review the recent technological progress and issues on the urban mine resources recycling in Japan and Korea, recycling process of the ELV(End of Life Vehicles) and E-waste(WEEE) were studied. Although technological level for processing of the ELV and E-waste is almost similar in both countries, the treatment of hazadous materials of ELV such as freon, air bag and ASR is unsufficient in Korea. In the E-waste recycling, the technological level is deeply different according to the enterprise size in Korea. Finally, the big R&D project on recycling of urban mine resources sponsored by government in both countries were discussed.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.209-219
• /
• 2018

In the areas of RoHS, WEEE, ELV and REACH, reinforcement of environmental regulations against harmful substances is a global trend not only in EC but also in all over the world. In the fields of Korea's major export products such as material parts, electrical and electronic products and automobile parts, we are responding to these regulations consistently. To develop reference material for analyzing lead and cadmium in paints, the candidate materials were produced through the screening process which separated shapes and sizes. To secure the traceability of the candidate materials produced, the characteristics and uncertainties are estimated by ICP-AES analysis using the primary reference material. The short-term and long-term stabilities also are evaluated in parallel. In order to calculate the final certification value of the candidate material, the verification were carried out by the performance evaluation through the comparison among the KOLAS (Korea Laboratory Accreditation Scheme) laboratories, and the CRM was produced in accordance with ISO Guide 35. The certified values and uncertainties of Pb and Cd of the final paint standard, determined according to the joint analysis among laboratories, are Pb [($191.4{\pm}3.1$) mg/kg, ($944.1{\pm}5.6$) mg/kg] and Cd [($45.0{\pm}2.6$) mg/kg, ($225.5{\pm}3.5$) mg/kg]. These standard materials were developed to enhance the reliability of measurement analysis, including the validity and traceability of measurement results. Also it is expected that the CRM will be used as QCM (quality control material) for the product design and the process monitoring, so that regulation and management of hazardous heavy metals can be systematically implemented.