• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.394-401
• /
• 2007

High speed all optical network is a viable option to satisfy the exponential growth of internet usage in the recent years. Optical networks offer very high bit rates and, by employing technologies like internet protocol over wavelength division multiplexing(IP-over-WDM), these high bit rates can be effectively utilized. However, failure of a network component, carrying such high speed data traffic can result in enormous loss of data in a few seconds and persistence of a failure can severely degrade the performance of the entire network. Designing IP-over-WDM networks, which can withstand failures, has been subject of considerable interest in the research community recently. Most of the research is focused on the failure of optical links in the network. This paper addresses the problem of designing IP-over-WDM networks that do not suffer service degradation in case of a single link failure. The paper proposes an approach based on the framework provided by a recent paper by M. Kurant and P. Thiran. The proposed approach can be used to design large survivable IP-over-WDM networks.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.4
• /
• pp.296-305
• /
• 2000

Virtual wavelength path (VWP) is the optical path when a wavelength conversion is possible in a wavelength division multiplexing (WDM) network that is transmission infrastructure for the next generation high speed backbone networks. To achieve efficient design for VWP networks, we must consider VWP routing, wavelength assignment, and wavelength conversion while satisfying many technical constraints of the WDM networks. In this study we propose an integrated model for efficient VWP design in WDM networks. We also develope a 3-phase algorithm, each of which deals with routing, wavelength assignment and route and wavelength reassignment, respectively. In our computational experiments, phase 1 algorithm can solve the problem to the optimality for medium size test networks. Phase 2 algorithm is an efficient heuristic based on a reduced layered network and can give us an effective wavelength assignment. Finally, phase 3 algorithm reconfigure VWP routing and its wavelength assignment to concentrate wavelength conversion nodes in the suggested VWP network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.499-504
• /
• 2012

Recently, base stations composed of digital unit (DU) and radio unit (RU) have been widely used in 4G mobile networks. To connect DU and RU, CPRI (common public radio interface) is usually used as the interface standard. This CPRI link is considered as one of the application markets for WDM-PON. In this paper, we analyzed the required specification of WDM-PON for the CPRI link of the 4G LTE-Advanced base station composed of DU and RU. This analysis is important to set a target goal of the development of WDM-PON system for 4G mobile networks.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.157-163
• /
• 2011

In this paper, novel traffic groomming algorithms are proposed with a primary goal for maximizing throughput in WDM Multi-ring networks. To achieve this goal, we design four network topologys that are ITG, STG, MTG, PMTG and simulate the throughput in uniform traffic environments. From this methods, we proposed novel traffic groomming algorithms to maximize throughput in WDM Multi-ring networks.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.419-427
• /
• 2007

In wavelength-division-multiplexing(WDM) networks a link failure may cause the failure of several high-bit-rate optical channels, thereby leading to large data loss. Recently, various protection and restoration mechanisms have been proposed to efficiently deal with this problem in mesh networks. Among them, dedicated path protection(DPP) is a promising candidate because of its ultra-fast restoration time and robustness. In this work we investigate the issue of planning and optimization of WDM networks with DPP. Integer linear programming(ILP), in particular, is one of the most common exact method to solve the design optimization problem for protected WDM networks. Traditional ILP formalizations to solve this problem rely on the classical flow or route formulation approaches, but both these approaches suffer from a excessively high computational burden. In this paper, we present a variable-aggregation method that has the ability of significantly reducing the complexity of the traditional flow formulation. We compare also the computational burden of flow formulation with variable aggregation both with the classical flow and route formulations. The comparison is carried out by applying the three alternative methods to the optimization of two case-study networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1405-1412
• /
• 2000

In this paper, we propose an efficient dynamic wavelength assignment algorithm in distributed WDM (Wavelength-Division Multiplexing) networks without wavelength conversion. The algorithm tries to assign a locally-most-used wavelength distributedly on a fixed routing path. We first formulate our algorithm by using the concept of a sample space which consists of optical fibers connected to nodes on a routing path of a lightpath to be assigned a wavelength. In particular, we analyze the blocking performance mathematically as compared with that of the most-used (MU) wavelength assignment algorithm previously proposed for WDM networks under centralized control. We also obtain numerical results by simulation on the blocking performance of other centralized/distributed wavelength assignment algorithms as well as our algorithm using the M/M/c/c dynamic traffic model. Consequently, we show that analytical results match simulation results and that our algorithm is efficient in distributed WDM networks in terms of blocking performance, control traffic overhead and computation complexity.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.315-324
• /
• 2017

In recent years, multicast services such as high-definition television (HDTV), video conferencing, interactive distance learning, and distributed games have increased exponentially, and wavelength-division multiplexing (WDM) networks are considered to be a promising technology due to their support for multicast applications. Multicast survivability in WDM networks has been the focus of extensive attention since a single-link failure in an optical network may result in a massive loss of data. But the improvement of network survivability increases energy consumption due to more resource allocation for protection. In this paper, an energy-efficient multicast algorithm (EEMA) is proposed to reduce energy consumption in WDM networks. Two cost functions are defined based on the link state to determine both working and protection paths for a multicast request in WDM networks. To increase the number of sleeping links, the link cost function of the working path aims to integrate new working path into the links with more working paths. Sleeping links indicate the links in sleep mode, which do not have any working path. To increase bandwidth utilization by sharing spare capacity, the cost function of the protection path is defined to use sleeping fibers for establishing new protection paths. Finally, the performance of the proposed algorithm is evaluated in terms of energy consumption, and also the blocking probability is evaluated under various traffic environments through OPNET. Simulation results show that our algorithm reduces energy consumption while maintaining the quality of service.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.524-526
• /
• 2007

In this letter, we study the multicast protection problem in sparse-splitting wavelength-division multiplexing (WDM) optical network, and propose a novel multicast protection algorithm called the shared source-leaf path-based protection (SLPP) algorithm. Unlike the proposals in previous studies, the backup paths derived by SLPP can share wavelength with the primary tree in sparse-splitting WDM networks. Simulations are used to evaluate the effectiveness of the SLPP algorithm.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.441-446
• /
• 2006

In recent years, WDM networks have received much attention as the Internet backbone networks because of the explosive growth of the Internet IP-based traffic. The Optical Burst Switching (OBS) has been proposed as an effective optical switching technology in the WDM networks. The OBS has the advantages in 1) the high usage rate of the bandwidth, and 2) no necessity of optical buffer. However, the OBS has the burst-contention problem in the networks. The deflection routing is proposed as one of means to solve this problem. In this paper, we propose a new routing method to minimize burst loss in the deflection routing based networks. In addition, we propose a QoS control method using a new routing algorithm. Finally, we show the variety of the proposed methods by computer simulations.