• 제목/요약/키워드: WCA

검색결과 48건 처리시간 0.02초

Geometric Multiple Watermarking Scheme for Mobile 3D Content Based on Anonymous Buyer-Seller Watermarking Protocol

  • Lee, Suk-Hwan;Kwon, Seong-Geun;Kwon, Ki-Ryong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권2호
    • /
    • pp.504-523
    • /
    • 2014
  • This paper presents a multiple-watermarking scheme for copyright protection and the prevention of illegal copying of mobile 3D contents with low resolution. The proposed scheme embeds a unique watermark and a watermark certification authority (WCA) watermark into the spatial and encryption domains of a mobile 3D content based on the buyer-seller watermarking protocol. The seller generates a unique watermark and embeds it into the local maximum curvedness of a 3D object. After receiving the encrypted watermark from the WCA, the seller embeds it into the encrypted vertex data using an operator that satisfies the privacy homomorphic property. The proposed method was implemented using a mobile content tool, and the experimental results verify its capability in terms of copyright protection and the prevention of illegal copying.

Effect of self-assembled monolayer and aluminum oxide ALD film on a PMMA substrate

  • Shin, Sora;Park, Jongwan
    • Journal of Ceramic Processing Research
    • /
    • 제19권6호
    • /
    • pp.525-529
    • /
    • 2018
  • The antireflective (AR) coated poly methyl methacrylate (PMMA) substrate was deposited by atomic layer deposition (ALD) on a self-assembled monolayer (SAM) to improve hydrophobicity and mechano-chemical properties of organic thin films. The water contact angles (WCA) were tested to characterize the surface wettability of SAM octadecyltrichlorosilane (OTS) films. Results showed that a contact angle of $105.9^{\circ}$ was obtained for the SAM films with an annealing process, and the highest WCA of $120^{\circ}$ was achieved for the films prepared by the SAM and ALD multi-process. The surface morphology of the SAM films with different assembly times and varying number of ALD cycles was obtained by atomic force microscopy (AFM). The maximum light transmittance for the SAM films on the PMMA substrate reached 99.9% at a wavelength of 450 nm. It was found that the SAM surfaces were not affected at all by the ALD process.

모바일 에드혹 네트워크에서 안정성을 향상시킨 분산 조합 가중치 클러스터링 알고리즘 (Advanced Stability Distributed Weighted Clustering Algorithm in the MANET)

  • 황윤철;이상호;김진일
    • 한국컴퓨터정보학회논문지
    • /
    • 제12권1호
    • /
    • pp.33-42
    • /
    • 2007
  • 모바일 에드혹 네트워크는 고정된 인프라의 도움 없이 이동 노드만으로 구성되므로 네트워크의 독립성과 융통성을 높일 수 있으나, 노드의 참여와 이탈의 자유로움 때문에 네트워크를 운영할 때, 망의 형태를 안정적으로 관리하는 것은 무엇보다도 중요하고 어려운 문제이다. 따라서 이러한 문제를 해결하기 위하여. 관리와 안전성에 중점을 둔 분산가중치 클러스터링 알고리즘을 제안한다. 제안된 알고리즘은 초기클러스터 형성시에는 기존의 분산가중치 알고리즘을 사용하고 클러스터 형성 후 이동 노드들로 인해 발생되는 재클러스터링을 최소한으로 줄이기 위해 부 클러스터 헤드와 분산게이트웨이라는 개념을 사용한다. 성능 검증을 위해 초기의 오버헤드, 재 가입률, 클러스터의 수를 기준으로 기존의 DCA과 WCA 알고리즘과 제안된 알고리즘을 비교, 평가한다.

  • PDF

Slope stability prediction using ANFIS models optimized with metaheuristic science

  • Gu, Yu-tian;Xu, Yong-xuan;Moayedi, Hossein;Zhao, Jian-wei;Le, Binh Nguyen
    • Geomechanics and Engineering
    • /
    • 제31권4호
    • /
    • pp.339-352
    • /
    • 2022
  • Studying slope stability is an important branch of civil engineering. In this way, engineers have employed machine learning models, due to their high efficiency in complex calculations. This paper examines the robustness of various novel optimization schemes, namely equilibrium optimizer (EO), Harris hawks optimization (HHO), water cycle algorithm (WCA), biogeography-based optimization (BBO), dragonfly algorithm (DA), grey wolf optimization (GWO), and teaching learning-based optimization (TLBO) for enhancing the performance of adaptive neuro-fuzzy inference system (ANFIS) in slope stability prediction. The hybrid models estimate the factor of safety (FS) of a cohesive soil-footing system. The role of these algorithms lies in finding the optimal parameters of the membership function in the fuzzy system. By examining the convergence proceeding of the proposed hybrids, the best population sizes are selected, and the corresponding results are compared to the typical ANFIS. Accuracy assessments via root mean square error, mean absolute error, mean absolute percentage error, and Pearson correlation coefficient showed that all models can reliably understand and reproduce the FS behavior. Moreover, applying the WCA, EO, GWO, and TLBO resulted in reducing both learning and prediction error of the ANFIS. Also, an efficiency comparison demonstrated the WCA-ANFIS as the most accurate hybrid, while the GWO-ANFIS was the fastest promising model. Overall, the findings of this research professed the suitability of improved intelligent models for practical slope stability evaluations.

중력자료를 이용한 한반도 중부 대륙-해양 지역의 지각구조 연구 (Crustal Structure of the Continent-Ocean Zone around the Middle Eastern Part of Korean Peninsula Using Gravity Data)

  • 유상훈;민경덕;박찬홍;원중선
    • 자원환경지질
    • /
    • 제35권5호
    • /
    • pp.455-463
    • /
    • 2002
  • 자료의 부족 및 육.해양을 동시에 감안해야 하는 상황으로 인하여 아직까지 한반도 중부 대륙에서 해양지역으로 이어지는 대륙연변부에서의 심부지각구조에 관한 심층적인 지구물리학적 연구는 이루어지지 못하였다. 본 연구에서는 중력자료를 이용하여 대륙과 해양을 잇는 대륙연변부 북위37$^{\circ}$~38$^{\circ}$, 동경128$^{\circ}$~132$^{\circ}$지역에 대한 심부지각구조를 해석하였다. WCA보정을 이용하여 해상지역의 선상중력자료에 나타나는 탐사측선상의 잡음으로 판단되는 고주파성분을 제거하고, 보정된 해상지역의 free-air 중력이상을 동일한 고도 기준면을 갖는 육상지역의 부게 중력이상과 결합하였다. 연구지역의 중력이상을 4개 지역으로 나누고, 각각의 지역에 대한 파워스펙트림 분석에 의해 산출한 모호면으로 판단되는 밀도 경계면은 한반도 내륙 부에서 대륙주변부를 지나 동해 울릉분지 쪽으로 갈수록 심도가 점점 얕아지는 양상을 보인다. 파워스펙트럼 결과에 의해 기초 모델로 설정하고 모델링을 실시한 결과, 모호면의 심도는 한반도 내륙지역에서는 약 33~35 km로 나타나고, 대륙주변부에서의 모호면의 심도는 18~28 km로서 한반도 내륙지역에 비해 얕아진다. 이와 같은 구조적 특성은 울릉분지의 주변부를 따라 나타나고 있는 중력변화에서도 잘 나타나고 있다. 울릉도 남쪽 해역에서의 모호면은 약 16~17 km로 대륙 쪽의 모호면 깊이보다 훨씬 얕다. 이와 같이 중력자료로부터 구한 지각모델의 결과는 인근 지역에서 이루어진 탄성파탐사를 통한 지각모델링 결과와 매우 유사하게 나타났다.

수자원 확보를 위한 URC공법의 적용 II: CSO의 처리와 슬러지 재활용에 관한 연구 (Application of Ultra Rapid Coagulation for Securing Water Resource II: Study of CSO Treatment and Sludge Reuse)

  • 박세진;윤태일;조경철;김창균
    • 청정기술
    • /
    • 제6권1호
    • /
    • pp.39-49
    • /
    • 2000
  • 초고속응집침전공정(URC)은 가중응집제(WCA) 첨가와 슬러지 반송을 통해 floc의 침전 속도를 향상시키고, 입자표면의 흡착을 활성화하여 오염물을 보다 효율적으로 제거할 수 있으며, lamella plate를 포함하는 침전조를 이용하여 초기 우수 유출(CSO)과 같은 막대한 유량에 대하여 경제성 있는 침전조 수면적 부하를 획득할 수 있음을 확인하였다. 또한, 침전조의 최적설계를 위해 유체 유동장 모델을 이용한 모사가 수행되었으며, 공정에서 발생되는 슬러지에 대한 재활용 가능성을 평가하여 2차적 오염부하를 억제하기 위한 방안을 모색하였다.

  • PDF

Stability of hydrophobic properties of plasma polymerized tetrakis(trimethylsilyloxy)silane film surface

  • Jang, Jinsub;Woo, Sungmin;Ban, Wonjin;Nam, Jaehyun;Lee, Yeji;Choi, Woo Seok;Jung, Donggeun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.147.1-147.1
    • /
    • 2016
  • Hydrophobic thin films are variously applicable for encapsulation of organic devices and water repulsive glass, etc. In this work, the stability of hydrophobic characteristics of plasma polymerized tetrakis (trimethylsilyloxy) silane (ppTTMSS) thin films were investigated. The films were deposited with plasma enhanced chemical vapor deposition (PECVD) on the glass. The deposition plasma power and deposition pressure was 70 W and 600 mTorr, respectively. Thereafter, deposited films were treated by 248nm KrF excimer laser. Stability of hydrophobic properties of plasma polymerized tetrakis(trimethylsilyloxy)silane film surface was tested by excimer laser irradiation, which is thought to simulate severe outdoor conditions. Excimer laser irradiation cycles changed from 10 to 200 cycles. The chemical structure and hydrophobicity of ppTTMSS films were analyzed by using Fourier transform infrared (FTIR) spectroscopy and water contact angle (WCA) measurement, respectively. Absorption spectra peaks and WCA of excimer laser treated ppTTMSS films did not change notably. These results show that our ppTTMSS films possess stable hydrophobic properties.

  • PDF

디지털위성중계기용 전원공급기 설계 및 구현에 대한 연구 (The Study on the Implementation and Design of Power Supply Unit of Digital Communication Satellite)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제11권9호
    • /
    • pp.855-860
    • /
    • 2016
  • 본 연구는 디지털위성중계기용 전원공급기의 설계 및 구현에 대해 기술하였다. 위성버스의 PLDIU(: Payload Distribution and Interface Unit)와 전원공급기의 인터페이스를 제시하였고, 우주환경에 대한 WCA(: Worst Case Analysis)를 통하여 ESD(: Electro Static Discharge) 등의 발생에 대한 회로 오동작 가능성을 최소화 시켰다. 발사환경 시 발생하는 진동 및 우주 방사능에 의한 TID(: Total Ionizing Dose)에 대한 시뮬레이션을 통해 신뢰성 있는 전원공급기를 설계하였으며, 제작 후 우주환경시험을 통하여 기능 및 성능에 문제없음을 확인하였다.