• Journal of Surface Science and Engineering
• /
• v.44 no.5
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.106-113
• /
• 2019

We investigated the application of tetrahedral amorphous carbon (ta-C) coatings to fabricate a glass lens manufactured using a glass molding process (GMP). In this work, ta-C coatings with different thickness (50, 100, 150 and 200 nm) were deposited on a tungsten carbide (WC-Co) mold using the X-bend filter of a filtered cathode vacuum arc. The effects of thickness on mechanical and tribological properties of the coating were studied. These ta-C coatings were characterized by atomic force microscopy, scanning electron microscopy, nano-indentation measurements, Raman spectrometry, Rockwell-C tests, scratch tests and ball on disc tribometer tests. The nano-indentation measurements showed that hardness increased with an increase in coating thickness. In addition, the G-peak position in the Raman spectra analysis was right shifted from 1520 to $1586cm^{-1}$, indicating that the $sp^3$ content increased with increasing thickness of ta-C coatings. The scratch test showed that, compared to other coatings, the 100-nm-thick ta-C coating displayed excellent adhesion strength without delamination. The friction test was carried out in a nitrogen environment using a ball-on-disk tribometer. The 100-nm-thick ta-C coating showed a low friction coefficient of 0.078. When this coating was applied to a GMP, the life time, i.e., shot counts, dramatically increased up to 2,500 counts, in comparison with Ir-Re coating.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.212-215
• /
• 1996

This paper focuses the strength and wear resistance of CVD diamond films. The strength of free-standing CVD diamond films synthesized by microwave plasm CVD, DC plasma CVD, RF plasma CVD and arc discharge plasma jet CVD has been measured by three-point bending test. The wear resistance of CVD diamod films has been evaluated by the pin-on-disk type testing. diamond films coated on the base of sintered tungsten carbide pin by hot filament CVD have been rubbed with a sintered diamond disk in muddy water. Volume removed wear of CVD diamond has been compared with stellite, WC alloy and bearing steel.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.31-35
• /
• 2003

Friction in cold forging with mist lubrication is measured with the ring compression test. Small quantity of mist lubricant is sprayed onto the surfaces of cemented tungsten carbide (WC) tools polished to mirror surfaces, and the specimens of pure aluminum are compressed. It is found that spraying small quantity of lubricant $(0.5\;g/m^2)$ is effective to reduce the friction in comparison with the dry condition. The mist particles stick to the tool surface as separated dots, and the behavior of the trapped mist lubricant between the tool and specimen during upsetting is discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.354-354
• /
• 2008

Recently, due to the tremendous growth of media technology, demands of the aspheric glass lens which is a high-performance and miniaturized is gradually increasing. Generally, the aspheric glass lens is manufactured by GMP(Grass Molding Press) method using WC(tungsten carbide) mold core. In this study, the thermal deformation which occurs in the cooling step of GMP was considered, and it was compensated the form of mold core. The lens which was molded by compensated mold core was satisfied that can be applied to the actual specifications.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.239-244
• /
• 2002

In this study, we developed the manufacturing technology of micro-hole and micro-shaft for micro punching system using micro electrical discharge machining and micro electro chemical machining. Micro punching dies of tungsten carbide with $55\;{\mu}m\;and\;110\;{\mu}m$ diameter and $250\;{\mu}m$ depth were made by micro electrical discharge machining. The form accuracy and surface roughness of die hole were pretty good and it was shown that the punched hole quality was fine. WC micro-shaft with $30\;{\mu}m$ diameter was made by the multistep micro electro chemical machining. The developed technologies can be effectively used in precision manufacturing of micro punching die and mass production of micro-shaft.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.162-162
• /
• 2015

증착 조건이 AlTiN 박막의 특성에 미치는 영향에 대하여 평가하였다. 한편, 공정변수의 하나로 빗각 증착을 적용하여 AlTiN 박막을 제조하고 그 특성을 평가하였다. Al-25at.%Ti 합금타겟을 음극 아크 소스에 장착하여 AlTiN 박막을 코팅하였다. 기판은 stainless steel(SUS304)과 초경(tungsten carbide; WC)을 사용하였다. 음극 아크 소스에 인가되는 전류가 낮을수록 AlTiN 박막 표면에 존재하는 거대입자의 밀도가 낮아졌으며, 공정 압력과 기판 전압이 높을수록 AlTiN 박막의 표면에 존재하는 거대입자의 밀도가 낮아지는 경향을 보였다. 코팅 공정 중 질소 유량을 변화했지만 AlTiN 박막의 특성에 변화는 없었다. AlTiN 박막 증착 시 빗각을 적용한 결과, $60^{\circ}$의 빗각을 적용한 다층 박막에서 약 33 GPa의 경도를 보였다. AlTiN 박막의 내산화성을 평가한 결과, $600^{\circ}C$이상에서 안정된 내산화성을 확인할 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.24-24
• /
• 2014

음극 아크 증착을 이용하여 제조한 AlTiN 박막의 공정 변화에 따른 물리적 특성 변화를 평가하였다. 또한 빗각 증착을 적용하여 제조한 AlTiN 박막의 특성을 평가하였다. Al-Ti 타겟(Al:Ti=75:25 at.%)을 음극 아크 소스에 장착하여 AlTiN 박막을 코팅하였다. 기판은 stainless steel(SUS304)과 초경(tungsten carbide; WC)을 사용하였다. 음극 아크 소스에 인가되는 전류가 낮을수록 AlTiN 박막 표면에 존재하는 거대입자의 밀도가 낮아졌으며, 공정 압력과 기판 전압이 높을수록 AlTiN 박막의 표면에 존재하는 거대입자의 밀도가 낮아지는 경향을 보였다. 코팅 공정 중 질소 유량을 변화했지만 AlTiN 박막의 특성은 변하지 았았다. AlTiN 박막 제조 시 빗각을 적용한 결과, $60^{\circ}$의 빗각을 적용한 다층 박막에서 약 33 GPa의 경도를 보였다. AlTiN 박막의 내산화성을 평가한 결과, $600^{\circ}C$이상에서 안정된 내산화성을 확인할 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.67-67
• /
• 2015

음극 아크 플라즈마 공정을 이용하여 증착된 AlTiN 코팅막의 공정 변화에 따른 물리적 특성 변화를 평가하였다. 또한 빗각 증착을 적용하여 제조한 AlTiN 코팅막의 특성을 평가하였다. Al-25at.%Ti 합금타겟을 음극 아크 소스에 장착하여 AlTiN 박막을 코팅하였다. 기판은 stainless steel(SUS304)과 초경(tungsten carbide; WC)을 사용하였다. 음극 아크 소스에 인가되는 전류가 낮을수록 AlTiN 코팅막 표면에 존재하는 거대입자의 밀도가 낮아졌으며, 공정 압력과 기판 전압이 높을수록 AlTiN 코팅막의 표면에 존재하는 거대입자의 밀도가 낮아지는 경향을 보였다. 코팅 공정 중 질소 유량을 변화했지만 AlTiN 코팅막의 특성은 변하지 았았다. AlTiN 코팅막 증착 시 빗각을 적용한 결과, $60^{\circ}$의 빗각을 적용한 다층 코팅막에서 약 33 GPa의 경도를 보였다. AlTiN 코팅막의 내산화성을 평가한 결과, $600^{\circ}C$이상에서 안정된 내산화성을 확인할 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.145-151
• /
• 2001

The dimensional accuracy of the cold forged part is depended on the elastic characteristics of the die. To increase the stiffness of the prestressed die, the first stress ring of the tungsten carbide alloy (WC) is considered. For the design, Lame's equation is used. Diameter ratios and interferences have been determinated by maximum inner pressure without yielding of materials. The design of the prestressed die has been compared with the conventional one. For the comparison, the FE-analysis using ANSYS has been performed. The results indicate that the prestressed die with the high stiffness can be obtained by the using the high stiffness material as the first stress ring.