• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.78-86
• /
• 2017

Japan has a lot of interest about weapons systems development of surrounding national and has invested heavily in securing intelligence assets to get information about them, because of conflict issues between Japan and Russia with four northern islands, China with Senkaku Islands and entry policy into the Pacific. Japan has used a large budget to detect and intercept ballistic missile for reasons of the launch of the Taepodong missile in 1998. After took over SIGINT equipments which U.S. force had operated in 1950s~1960s, Japan made a technological analysis and advanced IT technology to produce superior equipments. Japan's SDF has installed them in 19 locations across Japan. In addition, Japan's JASDF has installed advanced early warning RADAR to detect aircraft and high speed ballistic missile entering JADIZ with S-band in 28 locations across Japan. It is possible to detect missile launch preparations, engine tests, and launch moments at any time for operation of 6 satellites high resolution reconnaissance system and 6 aegis ships. In close cooperation with the US, Japan is accessible to the SBIRS networks which detects the launch of a ballistic missile in neighboring countries. In the future, Because the United States wants Japan to act as part of the United States in East, south Asia, it is believed that the exchange of intelligence on the surrounding countries between two countries will be enhanced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.181-187
• /
• 2020

In this paper, we proposed a register allocation algorithm and resource allocation algorithm in the high level synthesis process for the SoC design synthesis system of high performance vehicles We have analyzed to the operator characteristics and structure of datapath in the most important high-level synthesis. We also introduced the concept of virtual operator for the scheduling of multi-cycle operations. Thus, we demonstrated the complexity to implement a multi-cycle operation of the operator, regardless of the type of operation that can be applied for commonly use in the resources allocation algorithm. The algorithm assigns the functional operators so that the number of connecting signal lines which are repeatedly used between the operators would be minimum. This algorithm provides regional graphs with priority depending on connected structure when the registers are allocated. The registers with connecting structure are allocated to the maximum cluster which is generated by the minimum cluster partition algorithm. Also, it minimize the connecting structure by removing the duplicate inputs for the multiplexor in connecting structure and arranging the inputs for the multiplexor which is connected to the operators. In order to evaluate the scheduling performance of the described algorithm, we demonstrate the utility of the proposed algorithm by executing scheduling on the fifth digital wave filter, a standard bench mark model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1050-1058
• /
• 2005

This paper presents how to design and implement a very compact, cost effective and broad band receiver module for IEEE 802.16 FWA(Fixed Wireless Access) in the 40 GHz band. The presented receiver module is fabricated in a multi-layer LTCC(Low Temperature Cofired Ceramic) technology with cavity process to achieve excellent electrical performances. The receiver consists of two MMICs, low noise amplifier and sub-harmonic mixer, an embedded image rejection filter and an IF amplifier. CB-CPW, stripline, several bond wires and various transitions to connect each element are optimally designed to keep transmission loss low and module compact in size. The LTCC is composed of 6 layers of Dupont DP-943 with relative permittivity of 7.1. The thickness of each layer is 100 um. The implemented module is $20{\times}7.5{\times}1.5\;mm^3$ in size and shows an overall noise figure of 4.8 dB, an overall down conversion gain of 19.83 dB, input P1 dB of -22.8 dBm and image rejection value of 36.6 dBc. Furthermore, experimental results demonstrate that the receiver module is suitable for detection of Digital TV signal transmitted after up-conversion of $560\~590\;MHz$ band to 40 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.953-964
• /
• 2023

Climate change is undeniably the most urgent challenge that humanity faces today. Despite this, the level of public awareness and understanding of climate change remains insufficient, indicating a need for more proactive education and the development of supportive content. In particular, it is crucial to intensify climate change education during elementary and secondary schooling when values and ethical consciousness begin to form. However, there is a significant lack of age-appropriate, experiential educational content. To address this, our study has developed an innovative 3D simulator, enabling learners to indirectly experience the effects of climate change, specifically sea-level rise. This simulator considers not only sea-level rise caused by climate change but also storm surges, which is a design based on the analysis of long-term wave observation big data. To make the simulator accessible and engaging for students, we utilized the 'Unity' game engine. We further propose using this simulator as a part of a comprehensive educational program on climate change.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.1-22
• /
• 2009

The World Wide Web is transitioning from being a mere collection of documents that contain useful information toward providing a collection of services that perform useful tasks. The emerging Web service technology has been envisioned as the next technological wave and is expected to play an important role in this recent transformation of the Web. By providing interoperable interface standards for application-to-application communication, Web services can be combined with component based software development to promote application interaction and integration both within and across enterprises. To make Web services for service-oriented computing operational, it is important that Web service repositories not only be well-structured but also provide efficient tools for developers to find reusable Web service components that meet their needs. As the potential of Web services for service-oriented computing is being widely recognized, the demand for effective Web service discovery mechanisms is concomitantly growing. A number of techniques for Web service discovery have been proposed, but the discovery challenge has not been satisfactorily addressed. Unfortunately, most existing solutions are either too rudimentary to be useful or too domain dependent to be generalizable. In this paper, we propose a Web service organizing framework that combines clustering techniques with string matching and leverages the semantics of the XML-based service specification in WSDL documents. We believe that this is one of the first attempts at applying data mining techniques in the Web service discovery domain. Our proposed approach has several appealing features : (1) It minimizes the requirement of prior knowledge from both service consumers and publishers; (2) It avoids exploiting domain dependent ontologies; and (3) It is able to visualize the semantic relationships among Web services. We have developed a prototype system based on the proposed framework using an unsupervised artificial neural network and empirically evaluated the proposed approach and tool using real Web service descriptions drawn from operational Web service registries. We report on some preliminary results demonstrating the efficacy of the proposed approach.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.1-7
• /
• 2021

In this paper, by embedding a bare-die chip-type drive amplifier into the PCB composed of ABF and FR-4, it implements an embedded active device that can be applied in 28 GHz band modules. The ABF has a dielectric constant of 3.2 and a dielectric loss of 0.016. The FR-4 where the drive amplifier is embedded has a dielectric constant of 3.5 and a dielectric loss of 0.02. The proposed embedded module is processed into two structures, and S-parameter properties are confirmed with measurements. The two process structures are an embedding structure of face-up and an embedding structure of face-down. The fabricated module is measured on a designed test board using Taconic's TLY-5A(dielectric constant : 2.17, dielectric loss : 0.0002). The PCB which embedded into the face-down expected better gain performance due to shorter interconnection-line from the RF pad of the Bear-die chip to the pattern of formed layer. But it is verified that the ground at the bottom of the bear-die chip is grounded Through via, resulting in an oscillation. On the other hand, the face-up structure has a stable gain characteristic of more than 10 dB from 25 GHz to 30 GHz, with a gain of 12.32 dB at the center frequency of 28 GHz. The output characteristics of module embedded into the face-up structure are measured using signal generator and spectrum analyzer. When the input power (P_in) of the signal generator was applied from -10 dBm to 20 dBm, the gain compression point (P_1dB) of the embedded module was 20.38 dB. Ultimately, the bare-die chip used in this paper was verified through measurement that the oscillation is improved according to the grounding methods when embedding in a PCB. Thus, the module embedded into the face-up structure will be able to be properly used for communication modules in millimeter wave bands.