• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.943-949
• /
• 2009

In this paper, the 5.9GHz WAVE(Wireless Access in Vehicular Environments) channel modeling is used by the Jakes channel model for the suitability of the fast wireless channel fluctuation. The performance analysed the fading signal constellation and the spectrum in the IEEE 802.11p spectrum mask, the Doppler effect, the modulation scheme. In addition, the vehicular speed, exactly the performance analysis the WAVE communication systems follow the Doppler effect.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1229-1234
• /
• 2012

Vehicular communications have been receiving much attention in intelligent transport systems (ITS) by combining communication technology with automobile industries. In general, vehicular communications can be used for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments (WAVE). WAVE system transmits signal in 5.9GHz frequency band with orthogonal frequency division multiplexing (OFDM) signaling. In this paper, we consider physical layer issues in vehicular communications. We first overview the physical (PHY) layer of WAVE standard and properties of 5.9GHz signals, and then physical layer issues to provide reliable communication link are discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.237-244
• /
• 2011

Vehicular communications extend their application areas by combining communication technologies with roads/vehicles, and one of major applications is Smart Highway project. Smart Highway is a new advanced highway system which enhances the current highway system in Korea by improving reliability, safety and convenience. In this paper, we introduce wireless access technologies for vehicular communications especially focusing on Smart Highway. We first introduce the overall communication system architecture and the basic service and communication requirements for Smart Highway. Then, we discuss wireless access technologies including L2-level hand-over scheme. In addition, the results of experimental measurements of Wireless Access in Vehicular Environments (WAVE) system are introduced.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.43-53
• /
• 2014

Supporting handover functionality in V2I communication environments is important to provide higher quality service to users on the road. Wireless Access in Vehicular Environments(WAVE) standards define some features that devices can communicate with each other more efficiently in vehicular environments but they do not include handover function for providing effective V2I services. In this paper, we introduce a handover scheme in WAVE system and show the performance result of proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1031-1046
• /
• 2018

Vehicular ad hoc network (VANET) is a dedicated network to connect vehicles without any centralized administration or infrastructure. The wireless access in vehicular environments (WAVE) protocol leveraging IEEE 1609/802.11p is widely implemented for VANETs. However, in congested traffic situation, the performance of the WAVE system degrades significantly due to serious collision, especially for safety related broadcast services on the control channel (CCH) interval due to the inherent drawback of its collision avoidance mechanisms called carrier sense multiple access with collision avoidance (CSMA/CA). In this paper, we propose a method that can decrease the number of frame collisions in CCH with a few modifications to the IEEE 802.11p protocol. In the paper, vehicles still employ CSMA/CA to compete for the channel access opportunity. However, by taking advantage of periodicity of synchronization interval, a two-state switching scheme introducing two new inter frame space (IFS) is proposed to reduce the number of competing vehicles substantially and as a result, the collision probability is significantly decreased. The simulation results demonstrate the superiority of the proposed method in packet collision rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1449-1454
• /
• 2012

Received signal strength indicator (RSSI) represents the strength of the received signal at the front end of analog-to-digital convertor (ADC) input. RSSI value can be used for deciding the status of channel at the receiver. In this paper, the usage of RSSI in handover is studied using the practical measurement data. We first measure RSSI in 5.9GHz frequency band which is commonly used in wireless access in vehicular environments (WAVE) system. i.e., vehicular communications. Then, to implement a fast handover, the usability of RSSI data is analyzed based on the measured data. We also apply handover in practical highway environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.111-116
• /
• 2012

Vehicular communication is one of main convergence technologies which combines information and communication technology (ICT) with vehicle and road industries. In general, vehicular communication adopts IEEE 802.11p standard which is commonly referred as wireless access in vehicular environments (WAVE). In this paper, we investigate a multi-hop communication scheme for IEEE 802.11p based communication systems which support both vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications. First, we briefly overview the performance of IEEE 802.11p based communication systems. Then, a multi-hop communication scheme is introduced for both broadcast and unicast. The performance of proposed scheme is presented via experimental measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.841-847
• /
• 2015

The WAVE(Wireless Access in Vehicular Environments) communication system supports wireless communication environments between vehicles. As the utilization of wireless communication has been increased, attack methods have been varied. There is a high risk on packet manipulations conducted by third party. In this paper, we have designed a secure communication protocol between CA and vehicles. Our designed protocol uses a ECIES(Elliptic Curve Integrated Encryption Scheme) for vehicle authentication and AES(Advanced Encryption Standard) algorithm for protecting packet integrity and confidentiality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.526-531
• /
• 2014

Vehicular communications have been receiving much attention in intelligent transport systems(ITS) by combining communication technology with automobile industries. In general, vehicular communication can be used for vehicle-to-vehicle(V2V) and vehicle-to-infrastructure( V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environment(WAVE). WAVE system transmits signal in 5.835~5.925 GHz frequency band with orthogonal frequency division multiplexing(OFDM) signaling. In this paper, after 32 bit processed the channel monitoring in MAC(Media Access Control) layer of WAVE system implemented according to IEEE 802.11p standard, data were received and we evaluated the performance, we built the test bed consisting of OBU(On Board Unit) in the real expressway. We transmitted WSM(WAVE Short Message) and received WSM between OBU wirelessly. And then, we calculated channel occupancy time per one frame and throughput, and evaluated the performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.800-806
• /
• 2015

WAVE(Wireless Access in Vehicular Environments) system is wireless communication technology that vehicle sends and receives packets between vehicles or between vehicles and infrastructure in a high-speed mobile environment. In this study, we have designed and implemented a CRL(Certificate Revocation List) download protocol that is used to verify certificate revocation status of the other party when the vehicles communicate with WAVE system. This protocol operates over UDP. And to support security features, also, ECDSA(Elliptic Curve Digital Signature Algorithm) is used for mutual authentication and ECIES(Elliptic Curve Integrated Encryption Scheme) is used to ensure the confidentiality. Moreover, this protocol ensures the integrity of data by adding MAC(Message Authentication Code) to the end of packet and support the error and flow control mechanisms.