• Composites Research
• /
• 제23권5호
• /
• pp.8-14
• /
• 2010

서로 다른 길이비를 갖는 세 종류의 유리 직물 복합재료(평직, 균형능직, 비균형능직)의 면내 전단 물성 평가를 위해 편향인장 시험을 실시하였다. 직물 복합재료의 전단각을 결정하기 위하여 인장 변형량과 직물의 크기에 기인한 이론식, 직접측정법 및 이미지 분석법등을 이용하여 서로의 장단점을 비교하여 보았으며, 편향 인장 시험의 기하구조를 이용하여 유도된 식을 통해 면내 전단력을 계산하였다. 또한 트렐리스 시험(trellis-frame test)에 의한 결과와의 비교를 통해 편향 인장 시험에 의한 전단 물성 측정법의 정확도를 평가하였다. 실험 결과, 이론식에 의한 전단각 계산법은 전단각이 30도 이내일 경우에 이미지를 통한 직접 측정의 결과와 유사하였으며, 면내 전단력은 평직이나 균형 능직과 같은 등방형 직물의 경우에만 측정 샘플의 길이비에 무관한 균일한 결과를 보였다. 또한 편향 인장 시험과 트렐리스 시험 모두 비등방성이 큰 직물에 대한 전단 평가를 수행하는 데 있어서 많은 편차를 나타내었다.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.250-263
• /
• 2001

The up and down speed of heddle frames that produce woven cloth by insertion of weft yarns between warp yarns has been increased recently much for productivity improvement, which induces higher inertial stresses and vibrations in the heddle frame. the heddle frame is required to reduce its mass because the heddle frame contributes the major portion of the stresses in the heddle frames during accelerating and decelerating. Conventional aluminum heddle frames have fatigue life of around 5 months at 550rpm due to their low fatigue flexural strength as well as low bending stiffness. In this work, since carbon/epoxy composite materials have high specific fatigue strength(S/p), high specific modulus(E/p), high damping capacity and sandwich construction results in lower deflections and higher buckling resistance, the sandwich structure composed of carbon/epoxy composite skins and polyurethane foam were employed for the high-speed heddle frame. The design map for the sandwich beams was accomplished to determine the optimum thickness and the stacking sequences for the heddle frames. Also the effects of the number of ribs on the stress of the heddle frame were investigated by FEM analyses. Finally, the high-speed heddle frames were manufactured with sandwich structures and the static and dynamic properties of the aluminum and the composite heddle frames were tested and compared with each other.

• 한국통신학회논문지
• /
• 제37권1A호
• /
• pp.57-63
• /
• 2012

본 논문에서는 양안식 3차원 디스플레이 장치에 사용가능한 실시간 가상시점 영상을 생성방법을 제안한다. 제안하는 방법은 변이 탐색 (disparity estimation) 과정에서 중복되거나 불필요한 계산을 제거하기 위해, 변이맵 탐색 위치를 가상시점과 동일한 위치로 설정한다. 또한, 전역 방법을 사용한 변이맵 탐색 과정은 정확도는 높지만 복잡한 계산량이 문제이기 때문에 최적화 과정에서 변이값이 수렴하는 위치를 탐색하고 정보 갱신을 멈추는 방법을 사용하였다. 이렇게 얻어진 가상시점의 변이맵은 실제 참조가 가능한 영역인지 판단하는 수렴 조건 판단 (convergence check) 절차를 거쳐 영상을 합성한다. 영상 합성을 위한 모든 과정은 실시간 처리를 위하여 단일 명령 복수 쓰레드 (Single Instruction Multiple Threads) 구조인 그래픽 처리장치(GPU)를 활용한 프로그래밍을 통해 고속화를 이루었다. 실험 결과를 통해 제안하는 방법이 합성 영상의 화질을 유지하면서도 실시간으로 가상시점 영상을 합성한 것을 확인할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.11-17
• /
• 2005

This study was performed to analysis the operation process when fabric pattern design was done by the use of CAD system compared with the manual work in order to determine the operation efficiency with the application of fabric design CAD system. The results of the study were as follows: 1. since 160,000 colors were supported by CAD system, color proposed by consumer was able to match exactly according to the its design. However, exact color matching was not possible by manual work. 2. Woven state of back of pattern design could be identified simultaneously with face of it for CAD system, while face and back of the fabrics should be designed separatedly in case of manual work. 3. Since the combination of warp and filling yarn was compatible with the fabric density in one repeat unit in CAD system, exact size of pattern design to be woven was able to expressed. 4. Only simple graphical expression by manual work was seen, while with the CAD system, texture and shade effect as well as graphical expression could be expressed and so fault could be reduced in advance with the simulation of actual feeling of fabrics in the screen. In conclusion, when CAD system will be introduced to the textile industry, operation time of designing pattern can be reduced. Since the operation is easy and simple, a beginner can operate CAD system easily. Thus, production and wage costs can be saved and this can be related directly with the improvement of productivity which is the main purpose of introducing CAD system.

• 패션비즈니스
• /
• 제8권5호
• /
• pp.31-40
• /
• 2004

The purpose of this study is to investigate the change of the physical properties, bending and luster properties, which are related to the touch and appearance of silk fabrics modified by the degumming process. The silk has long been known as one of the most elegant and soft textile materials. The raw silk yarn, or cocoon bave, spun from the spinneret, is rather stiff due to the sericin covering the two fibroins together. The sericin can be removed during a degumming process. The removal of the sericin would result in remarkable change in the physical properties of the raw silk fabrics, including luster of the fabrics, which process parameters could possibly be utilized to adequately control the silk fabric properties. The KES(Kawabata Evaluation System) is a testing methodology that has been used with considerable success for predicting the hand and tailorability of apparel fabrics. This study uses one of the KES, bending tester, to measure the bending properties of the silk fabrics degummed for specified period to change the physical/mechanical properties of the fabric. The KES bending measurement revealed that the bending rigidity decreased for both the warp and weft direction of the silk fabrics with the increase of the degumming period. It has been shown in this study that the some of the hand-related physical properties, including the bending rigidity, drapability, and luster, could be modified with the change in the degumming period.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.189-194
• /
• 2016

The objectives of this research were to study the effect of salt-shrinkage finishing of silk on shrinkage degree and dyeing property of cochineal, and to investigate the efficacy of obtained results for imparting surface design effect on silk fabric. Ultimately it was aimed to suggest a technical process for developing natural dyed silk products with diverse design. Premordanted silk fabric was treated with $Ca(NO_3)_2$ solution(gravity: 1.45) at $90^{\circ}C$ for 1 min, washed, dried for further evaluation. The shrinkage of salt-treated fabric was calculated. The effects of salt treatment on the dye uptake of cochineal and colorfastness were investigated. The degrees of shrinkage were 10% and 3% for warp and weft, respectively. The salt treatment resulted in improving dye uptake of cochineal slightly. In addition, it improved colorfastness to washing and light. On the basis of the results, a technical process composed of premordanting, salt treatment and natural dyeing was suggested and using the process, two examples of textile design were presented. It can be concluded to impart various three dimensional surface design effect on silk fabric by applying salt-shrinkage finishing with combination of natural dyeing and mordanting.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• 한국정보통신학회논문지
• /
• 제15권10호
• /
• pp.2157-2163
• /
• 2011

본 논문에서는 가상 공간에서 의상을 직접 입어보는 체험을 해 볼 수 있는 웹 3차원 의복 애니메이션을 구현하기 위하여 2차원 및 2.5차원 의복 디자인 시스템을 이용한 3차원 의복 애니메이션 시스템을 설계하였고, 자연스러운 드레이핑을 구현하기 위하여 메시 생성 및 변형 알고리즘, 영역 추출 알고리즘, 워프 알고리즘, 명암 추출 및 적용 알고리즘을 이용하였다. 그리고 2차원 및 2.5차원 의복 디자인 시스템에서 추출된 좌표 점은 텍스트 형식의 데이터로 받아 의복 정보 파일로 입력하게 된다. 또한 이 의복 정보 파일은 3차원 의복 애니메이션에 활용할 수 있도록 구현하였다.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.120-127
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the mocrofiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 12$0^{\circ}C$. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, ti takes 3~5min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at $130^\circ{C}$. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at $120^\circ{C}$. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at $130^\circ{C}$5. The RT ratio changes at $120^\circ{C}$ in 8 and 12% of NaOH solutions were indifferent from that at $130^\circ{C}$ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.34-34
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the microfiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile properties. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 120℃. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, it takes 3∼5 min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at 130℃. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at 120℃. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at 130℃. 5. The RT ratio changes at 120℃ in 8 and 12% of NaOH solutions were indifferent from that at 130℃ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.