• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.265-278
• /
• 1986

This study was attempted to improve the thermal efficiency of 6 kW water-cooled diesel engine on power tiller. The engine performance tests were conducted to find out the effect of cooling water capacity of 2700cc, 2800cc, 2900cc, 3000cc, 3100cc on power, brake specific fuel consumption (BSFC), torque, temperature of cooling water and lubricating oil and friction losses of the engine with D. C. dynamometer. The results obtained in the study are summarized as follows: 1. The performance of the engine tested was adequated to Korea Industrial Standard but actual economy power was 10% higher than the labeled rated power of the engine. The BSFC of the engine tested 297.8g/kW-h which is belong a little higher level than hreign products. The temperature of cooling water was $101^{\circ}C$ which is higher than SAE standard ($88^{\circ}C$) 2. The friction losses of engine tested was 3.656 kW at 2200 rpm of rated rpm (piston speed 6.97m/sec) and is higher than those of foreign products. 3. When the cooling water capacity was increased from 2700cc to 3100cc the power output of the engine was increased from 6.7 kW to 7.13 kW at the rate of 6.4% and also the torque of the engine was increased from 28.85 N.m to 30.76 N.m at the rate of 6.39%. 4. When the cooling water capacity was increased from 2700cc to 3100cc, the BSFC was decreased 6.9g/kW-h from 310.9g/kW-h to 304.1g/kW-h, and after one half hour operation with full load, the temperature of cooling water was decreased $13^{\circ}C$ from $101^{\circ}C$ to $88^{\circ}C$ and also the temperature of lubricant oil was decreased $6.4^{\circ}C$ from $76.7^{\circ}C$ to $70.4^{\circ}C$. 5. The mechanical efficiency was increased from 70.08% to 71.08% when the cooling water capacity was increased from 2700cc to 3100cc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.381-385
• /
• 2010

An aging Society solitary life old mans are increasing. The nurses have to visit old mans and must confirm their disease, because they do not act well. It is very difficult to take care old man, because the number of Nurses are small. This problem is solved by collection of data about condition of old mans from long distance. Data communication with Ethernet have benefit to collection of measurement of old man's condition. The Data storage system an long distance place are storaged data and after several day data was transmitted to the DB over the Ethernet. For Miniaturization of such system the system must be OS-less Embedded Ethernet Server system. Such system manages the file management system only with H/W. The Storage device is used SD-card. SD Card is small size and operates with small power. By using 512MB sd memory card, it is possible to storage during 5~6 years, 10 byte of temperature value per second. In this paper, we make a Embedded Ethernet Server using W3100A, Atmega128 MCU and data stroage device using SD-Card. This system operates with O/S-less Embedded Ethernet Server. We talk about file System, Storage and Ethernet. We explained about MCU Atmega128, Interface between LAN LSIand W3100A, Interface between W3100A and Phyceiver RTL8201, data I/O between MCU and SD-Card and File System. We shows the experiment device and result of monitoring.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.321-326
• /
• 2005

근거리 통신망 LAN(Local Area Network)는 일반적으로 회사, 학교, PC방에서 널리 사용하는 통신 방식으로 Serial, USB 통신방식과 더불어 반드시 습득해야 할 프로토콜 중의 하나로서 앞으로는 이러한 LAN 통신방식을 이용하여 모든 가전기기, 회사 내의 보안장치 등이 모두 유무선 복합적으로 연결되어 휴대폰 또는 PDA로 상태변화를 실시간으로 확인이 가능한 시대가 올 것이다. 본 논문에서는 LAN LSI인 W3100A를 분석해 보고, MCU(Atmega128)과 Phycei ver인 RTL8201과 Interface하여 회로를 구성한 다음, TCP Client 역할을 위한 MCU Programming을 하여 .NET으로 Server 프로그램을 만들어 Server에 데이터를 전송한다. 이와 같이 MCU(Atmega128)을 사용하여 들어온 데이터를 Ethernet Network상으로 데이터의 전송을 가능하게 하는 Ethernet 통신 시스템을 연구하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.105-108
• /
• 2006

무선인지(RFID)시스템은 많은 산업 분야에 적용되고 있다. 대표적인 예로써 RFID 시스템을 이용한 출입 관제시스템을 들 수 있으며, 이런 경우 기존의 건물에 이 시스템을 설치하려고 하면 출입문을 개조하여야 한다. 하지만 무선 통신을 이용하면, 리더기에서 호스트 컴퓨터로의 접근이 용이해지므로 출입문 개조에 있어서도 한결 수월해진다. 이 때 필요한 것이 무선 디지털 데이터 통신 기술과 원격지에서 Tag의 ID를 모니터링을 위한 TCP/IP를 이용한 Ethernet 통신이다. 본 논문에서는 이러한 시스템의 개발방법에 대해 설명하였으며 RFID 리더기는 125KHz를 사용 주파수로 하고, Tag 칩은 Microchip사의 MCRF 250을 사용하였다. 그리고 무선 데이터 통신을 위해서 CC1020칩을 사용하였으며 이 칩의 장점은 간단히 레지스터를 설정으로 송신 상태 혹은 수신 상태로 변환이 가능하고 또한 주파수 설정도 가능하다는 것이다. 마지막으로 Ethernet 통신을 위해서는 W3100A칩을 이용하였으며, Ethernet 통신에 있어 OS가 차지하는 부분으로 하드웨어를 통해 구현하였다. 실험을 위해 하드웨어를 구성하고 각 모듈별 동작을 분석하고. 각 부분의 파형을 확인하였다. DB에 해당하는 Application을 통해 Tag ID DATA를 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.937-939
• /
• 2005

본 논문에서는 임베디드 프로세서인 ATmega128과 W3100A 이더넷 칩을 이용하여 범용 웹 모니터링 시스템을 구현하였다. 카메라를 이용한 동영상 오디오, RS-422 통신, 디지털/아날로그 신호의 입출력 등 다양한 제어 모니터링 정보를 통합하여 범용으로 사용할 수 있고, 소형, 저가, 저전력 소모가 가능하도록 설계, 구현하였다. 클라이언트 프로그램은 Java Applet으로 개발 하여 별도의 소프트웨어 설치 없이 웹브라우저를 통하여 접속되고, 원격지의 영상 및 각종 기기들의 상태를 실시간으로 모니터링하여 GUI기반의 각종 메뉴를 사용하여 원격 시스템을 편리하게 제어 할 수 있다.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.559-568
• /
• 2007

Recently, copy number variations (CNV) of genes or genomic segments have been intensively studied and various analysis methods have been developed. In this study, quantitative oligonucleotide ligation assay (qOLA) was applied to investigate CNV of KIT gene in the Landrace breed. A combined assay using qOLA and pyrosequencing, 6 genotype classes, I1/I1 or I3/i (IBe), I1/I2 or I3/IP, I1/I3, I1/IP or I2/i (IBe), I2/I2and I2/IP, were identified from 44 Landrace pigs. Genotype assignment using grouping features of measurements on a scatter plot showed 100% agreement with those using a statistical assignment by PROC FASTCLUS procedure implemented in the SAS package. Two versions (3100 and 3130) of ABI sequencers gave the same genotyping results, indicating there was no influence on qOLA by different versions of instrument, however, the means of standard deviation and coefficient of variation from the qOLA on a ABI 3130 (2.33 and 4.10) was lower than those from the qOLA on a ABI 3100 (2.67 and 4.81). Effect of proteinase K treatment on the PCR product followed by qOLA was very clear because noise peaks were disappeared and the observed ration fit better to the reference ratio corresponding to each genotype.