• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.158-162
• /
• 2012

$Y(Pr)Ba_2Cu_4O_8$ system is one of the most studied high temperature superconductors. Substitution of Pr for Y in this system suppresses $T_c$ and superconductivity finally disappears at a high Pr doping. There are competing theories for the suppression of $T_c$ but systematic experimental results are very rare. In order to find the change in Fermi surface topology which can affect the superconductivity, we have performed angle-resolved photoemission studies on single crystal samples of $YBa_2Cu_4O_8$ and $PrBa_2Cu_4O_8$. While the Fermi surface of $YBa_2Cu_4O_8$ shows a similar topology to those of other cuprates, we observe only 1D like band structures in $PrBa_2Cu_4O_8$. We find no significant differences in the chain band for both samples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.51-55
• /
• 2004

$CdS_{0.69}Se_{0.31}$ single crystal grown by sublimation method. Hall effect measurement were carried out by the Van der Pauw method. The measurement values under the temperature were found to be carrier density $n=1.95{\times}10^{23}m^{-3}$, Hall coeffcient $RH=3.21{\times}10^{-5}m^3/c$, conductivity ${\sigma}=362.41{\Omega}^{-1}m^{-1}$, and Hall mobility ${\mu}=1.16{\times}10^{-2}m^2/v.s.$ Heterojunction solar cells of $n-CdS_{0.69}Se_{0.31}/p-Cu_{2-x}S_{0.69}Se_{0.31}$ were fabricated by the substitution reaction. The open-circuit voltage, short-circuit currint density, fill factor and power conversion efficiency of $n-CdS_{0.69}Se_{0.31}/p-Cu_{2-x}S_{0.69}Se_{0.31}$ heterojunction solar cell under $80mW/cm^2$ illumination were found to be 0.41V, $19.5mA/cm^2$, 0.75 and 9.99%, respectivity.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.534-539
• /
• 1997

A CHF table method has been assessed in this study for rod bundle CHF predictions. At the conceptual design stage for a new reactor, a general critical heat flux (CHF) prediction method with a wide applicable range and reasonable accuracy is essential to the thermal-hydraulic design and safety analysis. In many aspects, a CHF table method (i.e., the use of a round tube CHF table with appropriate bundle correction factors) can be a promising way to fulfill this need. So the assessment of the CHF table method has been performed with the bundle CHF data relevant to pressurized water reactors (PWRs). For comparison purposes, W-3R and EPRI-1 were also applied to the same data base. Data analysis has been conducted with the subchannel code COBRA-IV-I. The CHF table method shows the best predictions based on the direct substitution method. Improvements of the bundle correction factors, especially for the spacer grid and cold wall effects, are desirable for better predictions. Though the present assessment is somewhat limited in both fuel geometries and operating conditions, the CHF table method clearly shows potential to be a general CHF predictor.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.85-90
• /
• 1990

The inertness of eight-coordinate tetrakis(picolinato)tungsten(IV) complex has been investigated by spectroscopic method in nonpolar solvent at 60$^{\circ}C$, 75$^{\circ}C$, 90$^{\circ}C$, 120$^{\circ}C$, and reflux condition. Until 2 days, showed the inertness whether existance of oxygen or not. After 2 days, showed the oxidation of W(IV) complex much more rapidly than substitution, which had $k_{obs}(sec^{-1}) {\varpropto} 1/[ligand]^2$. On sealing the sample under Ar gas, showed the inertness until 50 days, which had $k_{obs}(sec^{-1}) = 8.8{\times} 10^{-7}$. The$^1H$-NMR peak of $H_6$ in complex was diminished, otherwise that of free ligand was grown up. This result indicated that this complex was very inert.

• Archives of Pharmacal Research
• /
• v.19 no.3
• /
• pp.173-177
• /
• 1996

The Pneumococcus, Streptococcus pneumoniae, has an ample polysaccharide (PS) capsule that is highly antigenic and is the main virulence factor of the organism. The capsular PS is the source of PS vaccine. This investigation was undertaken to optimize the culture conditions for the production of capsular PS by type 4 pneumococcus. Among several culture media, brain heart infusion (BHI) and Casitone based medium were found to support luxuriant growth of pneumococcus type 4 at the same level. Therefore in this study, the Casitone based medium was used to study optimization of the culture condition because of BHI broth's high cost and complex nature. The phase of growth which accomodated maximum PS production was exponential phase. Concentrations of glucose greater than 0.8% did not enhance growth or PS production. Substitution of nitrogen sources with other resources or supplementation of various concentrations of metal ion (with the exception of calcium, copper, and magnesium ions) had adverse effects on growth and PS production. On the other hand, low level aeration and supplementation of 3 mg/l concentration of asparagine, phenylalanine, or threonine were beneficial for increased PS production. The synergistic effect of all the favorable conditions observed in pneumococcal growth assays provided a two-fold cumulative increase in capsular PS production.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.407-410
• /
• 2005

The drawability of AZ31B magnesium sheet is estimated according to the variable temperatures (200, 250, 300, 350 and $400^{\circ}C$), forming speed (20, 50, 100 mm/min), thickness (0.8, 1.4 t), blank holding force (1.0, 1.4, 1.7kN). The deep drawing process (DDP) of circular cup is used in forming experiments. The results of deep drawing experiences show that the drawability is well at the range from 250 to $300^{\circ}C$, 50mm/min forming speed and 1.4kN blank holding force. The 0.8t magnesium sheets were deformed better than 1.4t. BHF was controlled in order to improve drawability and protect the change of cup thickness. When BHF was controlled, tearing and thickness change were decreased and LDR. was improved from 2.1 to 3.0.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.896-900
• /
• 2000

A study was done on the synthesis of new poly(arylene ether)s and poly(arylenesulfide) with rigid benzoxazole pendants using nucleophilic aromatic substitution reaction. As a new aromatic monomer, 1,4-bis(2-benzox-azolyl)-2,5-difluorobenzene [I] w as synthesized in three steps starting from 1,4-dibromo-2,5-difluorobenzene. A model reaction of difluoro monomer [I] with two equivalents of m-cresol or thiophenol in a typical ether con-densation reaction conditions gave very high yields ( > 93%) of the desired disubstituted product, suggesting the feasibility of polymer formation in these reaction system. Monomer[I] was polymerized with bisphenols and bisbenzenethiol in NMP using K2CO3 as base. The molecular weight of the resulting polymers, however,seemed relatively low according to their solution viscosity values ( ηinh = 0.15-0.29 dL/g). The poly(arylene ether)s were soluble in several common organic solvents including chloroform, pyridine and N,N'-dimethylfor-mamide. The poly(arylene sulfide) was, however, ony soluble in strong acids like sulfuric acid and trifluoro-acetic acid. The glass transition temperatures were found to be 175-215 $^{\circ}C.$ These polymers were stable up to 380-420 $^{\circ}C$ in both nitrogen and air, as determined by the temperature that a significant weight loss began to appear on TGA.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.683-686
• /
• 1995

Using by the x-ray diffractometry(XRD), the thermomagnetic analysis(TMA), a scanning electron microscopy (SEM-EDX), we knew that the $(Sm_{0.5}RE_{0.5})Fe_{11}Ti$ (RE=Ce,Pr,Nd,Sm,Gd,Tb) compounds were formed to tetragonal $ThMn_{12}$-type structure having a uniaxial magnetocrystalline anisotropy with easy magnetization c-axis. The intrinsic magnetic properties of those were determined by fitting the two magnetization curves of experimental and calculation magnetization. The anisotropy constant $K_{1}$ of this compounds was in the range of $1.75\;-\;9.2\;MJ/m^{3}$ and approximately one order higher than $K_{2}$. $SmFe_{11}Ti$ had the highest anisotropy of $K_{1}\;=\;9.2\;MJ/m^{3}$, $K_{2}\;=\;0.4\;MJ/m^{3}$ and ${\mu}_{o}H_{A}=\;19.8\;T$ among the compounds, substitution of any other rare earth elements for Sm decreased magnetocrystalline anisotropy.

• YAKHAK HOEJI
• /
• v.42 no.1
• /
• pp.31-38
• /
• 1998

Dextran-5-(4-ethoxycarbonylphenylazo)salicylic acid ester(Dextran-5-ESA) was synthesized as a potential colon-specific prodrug of 5-aminosalicylic acid (5-ASA). No free 5-(4-eth oxycarbonylphenylazo) salicylic acid (5-ESA) was detected when the chemical stability of dextran-5-ESA was tested at pH 1.2, or pH 6.8 bath solution, Effects of the degree of substitution (DS) and molecular weight of dextran on the depolymerization by dextranase was investigated. Depolymerization(%) decreased with increasing DS, and was not affected by M.W. of dextran. The extent of prodrug conversion after incubation in the contents of various G.I. Tract segments of rats was evaluated. 5-ASA was released in the cecal contents, but not in the contents of proximal small intestine (PSI) or distal small intestine (DSI). No significant prodrug conversion was observed in the cecal contents of rats pretreated with kanamycin sulfate, which indicated that microbial enzymes were responsible for the cleavage of the prodrug.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.548-555
• /
• 2023

SAPO-34 catalysts were modified with polyethylene glycol (PEG) and Pb to improve their catalytic lifetime and selectivity for light olefins in the conversion of dimethyl ether to olefins (DTO). Hierarchical SAPO-34 catalysts and PbAPSO-34 catalysts were synthesized according to changes in the molecular weight of PEG (M.W. = 1000, 2000, 4000) and the molar ratio of Pb/Al (Pb/Al = 0.0015, 0.0025, 0.0035), respectively. By introducing PEG into the SAPO-34 catalyst crystals, an enhanced volume of mesopores and reduced acidity were observed, resulting in improved catalytic performance. Pb was successfully substituted into the SAPO-34 catalyst frameworks, and an increased BET surface area and concentration of acid sites in the PbAPSO-34 catalysts were observed. In particular, the concentrations of the weak acid sites, which induce a mild reaction, were increased compared with the concentrations of strong acid sites. Then, the P2000-Pb(25)APSO-34 catalyst was prepared by simultaneously utilizing the synthesis conditions for the P2000 SAPO-34 and Pb(25)APSO-34 catalysts. The P2000-Pb(25)APSO-34 catalyst showed the best catalytic lifetime (183 min based on DME conversion > 90%), with an approximately 62% improvement compared to that of the unmodified catalyst (113 min).