• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.57-63
• /
• 1991

In this paper, propagation characteristics of W-type single mode fiber with dual shape core is investigeted theoretically. Design parameters of DSC(dual shape core) W-type single mode fiber with very low dispersion over a wide wavelength range are computed using scalar approximation. The results have larger core radius and stronger confinement for mode field distribution in core than conventional W-type fiber with single shape core.

• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.33-44
• /
• 2005

The purpose of this study Is to classify foot types of elderly women and young women and to suggest shoes size system by foot types for elderly women. The subjects were 321 elderly women and 181 young women. Their right feet were measured directly and indirectly by using scanner and digital camera. The anthropometric measurements were composed of 62 items. They were measured during the months of July and October in 2001 and November in 2002 The results and discussions of this study are as follows. First, in analyzing shape of the foot of elderly and young women, the shapes of foot were classified as N-type (high and narrow foot shape and wide toes), W-type (wider width for its length and severe alteration), L-type (low foot shape as oval). Second, the most characteristic foot type in elderly women was W-type. In this type, the width was wider for its length, the first metatarsophalangeal protrusion was severe and the toes were gathered at the center. On the other hand, young women belonged to N-type. Third, we suggested new size system of shoes for elderly women and the standard foot shape each type. The size system was based on foot length and foot types. Hopefully, understanding the shapes of foot and characteristics of each foot type will help to develop suitable shoes for elderly women.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.170-177
• /
• 2013

This study is focused on the shape design and flow analysis on a 200 W-class Gyromill type vertical axis wind turbine rotor blade. Single tube theory is adopted for the shape design of the turbine blade. 2-dimensional CFD analysis is conducted to examine the turbine performance with basic shape, and then 3-dimensional shape is determined from the examination of the performance. By the CFD analysis on the 3-dimensional shape of the wind turbine, performance of the turbine is examined and also, shape of the wind turbine rotor blade is determined accordingly. From the results of this study, a 200 W-class Gyromill type vertical axis wind turbine rotor blade is designed and the reliability of the design method is confirmed by CFD analysis.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.196-207
• /
• 1994

Data on 27 W UMa systems having a asymmetric light curve so called O'Conell effect have been collected. Investigated 27 W UMa systems were classified into 12 positive and 15 negative type according to the shape of its asymmetric light curve. A list of members of the group, their current observational statue, and their physical and evolutional relationship to asymmetric W UMa type binaries are discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.595-606
• /
• 2005

The purpose of this study is to identify foot shapes of elderly women by classifying their foot types according to the shapes of sole (plantar view) of foot and analyzing the characteristics of each type. The subjects were 321 elderly women over 60 years of age. Their right feet were measured indirectly by using .scanner. The anthropometric measurements consist of 32 items. They were measured during the months of July and August in 2001. The results and discussions of this study are as follows. First, in analyzing sole of the foot of elderly women, the shapes of sole were classified as W-type (wider width for its length and severe alteration), A-type (similar to W-type but with narrower width), D-type (protruded outside) and H-type (even foot width). Second, the most characteristic sole type in elderly women was W-type. In this type, the width was wider for its length, the first metatarsophalangeal protrusion was severe and the toes were gathered at the center. Hopefully, understanding the shapes of sole and characteristics of each sole type will help to develop suitable shoes for elderly women.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.196.1-196.1
• /
• 2011

In this study, a test bed was constructed in order to evaluate thermal efficiency of the energy pile which carries out combined roles of a structural foundation and of a heat exchanger. The energy pile in this study is designed as a large-diameter drilled shaft equipped with the heat exchange pipes which configures a W-shape and an S-shape. The drilled shaft reached to the depth of 60 m whilst the heat exchange pipes were installed to about 30 m deep from the ground surface. The W-shaped and S-shaped heat exchange pipes were installed in the opposite sections of the same drilled shaft. In-situ thermal response tests were performed for both the shapes of heat exchange pipes. To avoid underestimating the thermal performance due to hydration heat of concrete inside the drilled shaft, the in-situ thermal response tests for the energy pile were performed after four weeks since the installation of the energy pile.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.432-438
• /
• 2011

We need to make the standard of the best baffle shape and L/W ratio of clearwell due to insufficient disinfection in short L/W ratio and uneconomic design in long L/W ratio. The objectives of this research were to evaluate the best shape of baffle and economic L/W ratio in the all sorts of shape and size by using computational fluid dynamics. In the results of this research, the baffle with smaller number of turning flow is more beneficial for hydraulic efficiency. So, even if the same shape and structure, baffle should be designed as smaller number in turning flow. The best shape of baffle is ZigZag type (model 2) and the worst shape is Distributed types (model 4). The ZigZag type can reduce number of baffle about 67% than that of the Distributed types. In the ZigZag type, economic L/W ratio is 30~50. If L/W ratio exceed over 50, it is not economic because construction costs greatly increase and an increasing rate of $T_{10}/T$ is very small.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.131-138
• /
• 2001

In inverted T-shape composite beam examine the structural behavior by experiment According to arrangement, type of stud connector, type of shear connector, reinforcement by welding of stirrup and a close analysis we came to these conclusion. 1) The compare result of bending strength according to arrange type of stud connector : A1-W(stud connector located web)specimen is exceed than A1-F(stud connector located flange). 2) B1-N(using prominence and depression of the web by shear connector) specimen is decrease than A1-W(using stud bolt by shear connector)specimen in bending strength and B2-N(reinforced by welding the stirrup to lower flange)specimen is similar with A2-W specimen. 3) According to reinforced by welding the stirrup to flange, the stiffness and bending strength of the beams are increase. A-scries stirrup comparatively low effective in the increase of strength by welding the stirrup to flange because enough composite effect show by stud connector, but B-series stirrup is comparatively high effective in shear connector effect because shortage of prominence and depression of the web.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.329-332
• /
• 2005

Cross rolling process is one of incremental forming processes to form an axi-symmetric shaped metal component. It can be classified into two types according to the shape of dies, which are a drum type (roll type) and a plate type (straight type). It can also be classified into a wedge type and a ramp type processes according to deformation characteristics of a material. The ramp type die is applied to plate type cross rolling process in cold forming process for forming of teeth of gear or bolt, while the wedge type die is generally utilized to drum type and plate type cross rolling processes in hot forming process. A shape of the ramp type die is usually same as final shape of a product at every section of a progressing direction, while the shape of the wedge type die has different shapes in a progressing direction. In this paper, a rolling of neck part in a ball stud component has been carried out using the plate type cross rolling process with a ramp shaped die. Forming characteristics have been performed using finite element analysis in order to obtain a proper preform for the ramp type plate cross rolling process.