• Archives of Metallurgy and Materials
• /
• v.65 no.3
• /
• pp.1069-1072
• /
• 2020

Mortar feedstock is extruded to form bead and it is selectively placed line by line in the material extrusion additive manufacturing. With respects to part building process healthiness, load-supporting ability of overlaid beads is emphasized as buildability. Buildability is primarily dependent on thixotropic properties of feedstock and vertical overlapping schedule. In the present study, water-to-binder (w/b) ratio was chosen as material aspect to assess buildability. Uneven bead shape evolution and premature failure were highlighted owing to low yield stress of high w/b ratio feedstock. Feedstock with optimum w/b ratio showed good buildability even at the interval time of 19 sec.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.105-113
• /
• 2006

This paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine(S) and coarse(G) aggregate was fully replaced with fly ash(FA). And flowability reduction problem in a large amount of fly ash concrete settled addition water($W_f$) in concrete mixture. In the test, water-cement ratio($W_c/C$) was 0.35, 0.45, and water-fly ash ratio($W_f/FA$) was 0.35, 0.45. The fly ash replacement is two different method of P and Q. The P method is mix property that the fly ash and addition water($W_f$) weight is equal to the aggregate weight [ $FA+W_f$ = G (or S)]. The Q method is mix property that fly ash is equal to aggregate weight, and added addition water($W_f$) [$FA+W_f$ > G (or S)]. Test were performed for properties of fresh concrete and compressive strength were determined at 3, 7, 28 and 91 days. The result, compressive strength was improvement that $W_c/C=0.35$, $W_f/FA=0.35$ and fine aggregate replacement in P method series than others. The flowability at Q method was improvement result than P method, but compressive strength was not. Test results indicate significant improvement in the strength properties and flowability of plain concrete by the inclusion of fly ash as fully replacement of fine and coarse aggregate, and can be effectively the fly ash replacement method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.243-246
• /
• 2004

W CMP 공정에서 abrasive 의 size 및 shape 에 따른 CMP 거동에 대해 관찰하였으며, 주요 제거 막질인 W 막질과 stopping layer 로 사용되는 Oxide 막질에 대한 압력(P)과 상대 속도(V) 영향성을 관찰하였다. CMP 제거량이 입자의 size 변화에 의존한다는 기존의 이론과는 달리 응집도(aggregate ratio) 변화가 주요 변수임을 밝혀 내었다. 한편, 각 막질에 대한 P,V 영향성 평가를 통해, 변형된 Prestonian equation 이 abrasive size 및 shape 에 상관없이 W 막질의 제거 거동을 설명하는데 중요한 역할을 수행함을 보였다. 그렇지만, W CMP 공정에서 stopping layer 로 사용되는 oxide 막질의 거동을 설명하는 데에는 어려움이 있었으며, 특히 P,V 에 의한 비선형적 removal rate(RR) 거동발생으로 인해 기존의 이론치와는 많은 차이를 나타내었다. 또한, abrasive size 와 shape 에 따라서도 복잡한 거동을 나타낸다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.206-207
• /
• 2009

PECVD를 이용하여 상온에서 Silicon nitride 박막을 제조하였다. 그리고 증착 중에 non-invasive ion energy analyzer를 이용하여 이온에너지와 이온에너지 flux룰 측정하였다. PECVD의 소스 파워는 500W, 바이어스 파워 100W으로 고정하고 주파수 250Hz으로 고정된 상태에서 펄스를 인가하여 duty ratio를 30-100%까지 변화시켰다. 작은 duty ratio 범위 (30-70%)에서 duty ratio가 감소할 때, 이온에너지와 이온에너지의 비가 감소하였다. 이 때 감소되는 굴절률은 저이온에너지 변수와 강한 연관성을 지니고 있었다. 굴절률은 1.65-2.46 사이에서 변화하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.57-60
• /
• 2002

Recently, the coal ash production has been increased by increase of consumption of electric power. So it is important to find a reclaimed place and treatment utility for treating coal ash. Accordingly, in this study we performed an experimental study to compare and analyze the Properties of concrete according to W/C and bottom ash replacement ratio. As a result of this study, it was found that the bleeding content was decreased according to decrease of W/C and increase of bottom ash replacement ratio, and the compressive strength of concrete using bottom ash was similar to plain concrete(replacement ratio 0%).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.699-704
• /
• 2002

Recently, the coal ash production has been increased by increase of consumption of electric power. So it is important to find a reclaimed place and treatment utility for treating coal ash. Accordingly, in this study we performed an experimental study to compare and analyze the properties of concrete according to W/C and bottom ash replacement ratio. As a result of this study, it was found that the bleeding content was decreased according to decrease of W/C and increase of bottom ash replacement ratio, and the compressive strength of concrete using bottom ash was similar to plain concrete(replacement ratio 0%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.250-250
• /
• 2010

Flexible display의 발전에 따라 점차 고온 공정에서 plastic 기판에 영향을 주지 않는 저온 공정으로 변화해 가고 있다. 이러한 발전에 따라 공정온도에 따른 SiNx의 특성 분석을 위해 우선 150C~300C에서 SiNx의 박막을 증착하였다. gas ratio (SiH4:NH3=4:60)와 Power (50W), 공정시간(25min)을 고정하고 온도만을 가변하여 박막의 특성을 분석하였다. 이후에 150C로 온도를 고정 후 gas ratio를 가변하고 Power (40W)와 온도(150C)는 고정 후 실험을 진행하여, 150C에서 최적화된 gas ratio를 알아내도록 하였다. 위의 실험은 p-type 실리콘 웨이퍼 위에 SiNx 박막 증착 후 굴절률과 증착률을 측정하였고, Al 전극을 증착하여 MIS구조를 구현하여, gate voltage에 따른 capacitance를 측정하였다. 이번 논문에서는 SiNx의 Substrate temperature와 gas ratio의 변화에 따른 다양한 특성을 확인하고 이를 체계적으로 분석하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.468-477
• /
• 2012

This study aimed to mix and test mortar incorporating activated Hwangtoh to improve the Hwangtoh brick bond strength of brick structures. To do this, the bond strength correlation of mortar was analyzed by means of materials and experiment factors and levels, and the optimum conditions were suggested after analyzing the physical properties of brick and the mix ratio of mortar and additive. Furthermore, the compressive strength and bond strength were found to be in inverse proportion, and in terms of the materials and mixing level, W/C ratio, substitution ratio of activated Hwangtoh, and fine aggregate grading were shown to have a considerable influence on the strength. In conclusion, the optimum mixing conditions to improve the bond strength are found to set W/C ratio at 65% and replacmenet ratio of activated Hwangtoh at 10%.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.109-110
• /
• 2006

We have studied the effect of C/Ti atomic ratio of TiCx (x=0.5, 0.75 and 1.0) raw powder on the properties of the Ti-Mo-WTiC sintered hard alloy. The decrease of C/Ti atomic ratio accelerated the densification in the sintering process. The hardness was remarkably improved up to 1350HV with decreasing the C/Ti atomic ratio because of increase of TiCx phase volume content and its fine dispersion. From the results of electro-chemical tests in acid and 3% NaCl solutions, it was obvious that every alloy had excellent corrosion resistance, which meant about 200 times better than that of WC-Co cemented carbide.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1604-1615
• /
• 1969

This experiment was carried out as one of the basic studies to improve the acid resistance of concrete and it was conducted to investigate some relations among physical properties such as basorption, ratio of water to cement, compressive strength, density and ratio of mix to weight losses of mortar when exposed to 0.1 N solution of hydrochrolic acid. The results obtained from the limited data secured so far in this experiment are summarized as follows: 1. The specimens used in the experiment were made of 5 cubic centimeters of mortar having such various ratios of mix by weight as 1 : 1, 1 : 3, 1 : 5, 1 : 7, 1 : 10. 2. Physical tests included compressive strengths at 7 days, 28 days, 3 months, and 6 month, and 5 hour boiling absorption test. 3. In acid test, every specimen was immersed into 0.1 N solution of hydrochrolic acid. The specimens exposed to the acid solution were weighed to determine the weight losses of the acid-corroded at one week interval for 7 weeks exposure, and the old acid solutions were also changed to fresh one when weighed the weight losses by acid attack at one week interval. 4. The correlative relations were found among physical properties and they are expressed by certain formulas as follows; i) Relation between ratio of mix and absorption Y = 1.036x + 13.53 where Y: absorption(%) X: ratio of mix ii) Relation between ratio of mix and ratio of water-cement Y = 0.204x + 0.214 where Y: ratio of water-cement. X: ratio of mix iii) Relation between ratio of water-cement and absorption Y = 5.01x + 12.53 where Y: absorption(%). X: ratio of water-cement iv) Relation between density and absorption Y = 50.6 - 0.0176X where Y: absorption(%). X: density($kg/m^3$) v) Relation between density and ratio of water cement Y = 7.2183 - 0.0033X where Y: ratio of water-cement . X: density($kg/m^3$) 5. After completing the acid exposure test the specimens were corroded and , the per cent ranges of weight losses varies from a minimum of 20.4 per cent at a 1 : 1 mix to a maximum of 92.0 per cent at a 1:10 mix 6. The correlative relations of physical properties of mortar to weight losses by acid attak were found and they are also expressed by certain formulas as follows: i) Relation between weight losses and ratio of mix Y = 8.59X + 8.63 where Y: weight losses(%), X: ratio of mix ii) Relation between wieght losses and absorption Y = 0.121x + 12.43 where Y: absorption(%). X: weight losses(%) iii) Relation between weight losses and ratio of w/c Y = 0.0226X + 0.07 where Y: ratio of w/c X: weight losses(%) iv) Relation between weight losses and compressive strength LogY = 3.6097 - 0.05058X + 0.00022$X^2$ where Y: compressive strength ($kg/cm^3$) X: weight losses(%) v) Relation between weight losses and density Y = 2153.1 - 6.62X where Y: density($kg/m^3$) X: weigh losses(%) 7. In order to make better acid resistant mortar, it could be concluded that a 1 : 3 mix or richer mixes, adequate mixing water to minnimize the ratio of water-cement considering the workability, 16 per cent or less absorption by 5 hour boiling water, 1,800 kilogram per cubic meter or denser density by absolute weight base and 200 kilogram per square meter or compressive strength at 20 day, etc are required so as to obtain acid-resistant mortar. In addition to the above, it might be recommonded to select the fine aggregate and to use better equipments such as a mechanical vibrator, a mechanical mixer etc. in concrete manufacturing works.