• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.49-54
• /
• 2011

Animal manure is produced annually 43.7 million tonnes in Korea. Among them, about 85.6 % are used as compost or liquid fertilizer to the agricultural land. The animal manure can be effectively utilized by mixing with organic byproducts that result in generation of biogas from anaerobic co-digestion process. This study aimed to optimize the content of total solid materials (TS) and determine the effect of organic byproduct on the co-digestion process. Prior to the byproduct treatments, determination of proper content of TS was conducted by controlling at 5 or 10 %. For the byproduct treatments, swine manure without adding the byproduct was used for control treatment, and swine manure mixed with either corn silage or kitchen waste was used for other treatments. Volume of biomethane ($CH_4$) generated from digested materials was quantified before and after byproduct treatments. In result, a 1.4-fold higher biomethane, about 0.556 L/$L{\cdot}d$, was produced when the content of TS was controlled at 10 %, compared at 5 %, about 0.389 L/$L{\cdot}d$. When the swine manure was mixed with the corn silage or kitchen waste, a two-fold higher biomethane was produced, about 1.theand 1.0heL/$L{\cdot}d$, respectively, compared to the control treatment. Biogas production from organic dry matter (odm) was a3, 362eand 2h6 L/kg odm${\cdot}$d for control, corn silage, and kitchen waste treatment, respectively. The lower biogas production in the treatment of kitchen waste than that of corn silage is associated with its relatively high odm contents. The methane concentration during the whole process ranged from 40 at the beginning to 70 % at the end of process for both the control and kitchen waste treatments, and ranged from 52 to 70 % for the corn silage treatment. Hydrogen sulfide ($H_2S$) concentration ranged between 350 and 500 ppm. All the integrated results indicate that addition of organic byproduct into animal manure can double the generation of biogas from anaerobic fermentation process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Journal of Animal Science and Technology
• /
• v.46 no.6
• /
• pp.989-998
• /
• 2004

The objectives of this work was to investigate the effects of feeding type of concentrates during growing period and slaughter age on growth performance, feed efficiency and carcass characteristics in growing-fattening Holstein steers. Treatments were two concentrates feeding types(ad libitum or restricted 1.9% of BW) and three slaughter ages(at 19, 22 or 25 mo). Body weight at slaughter was numerically higher(approx. 8.3%) for the restricted than the ad libitum feeding groups. TDN intake rate was higher(8.4%) for the restricted than the ad libitum feeding groups. One mo slaughter delay increased TDN intake by 4%. Despite the lack of significances, higher back fat thickness and rib-eye area appeared in the restricted feeding or the late slaughter groups compared with the ad libitum feeding or the early slaughter groups. Marbling score(mean 2.46) numerically increased when the steers were restrictively fed concentrates compared with the ad libitum feeding groups. In addition, significant increases in the marbling score were associated with the slaughter age delay. In economic analysis, increases in total income were associated with the restricted feeding and the slaughter age delay. Whereas the highest monthly income appeared in the restricted feeding-and-slaughter at 22 mo group. In conclusion, the optimal feeding system may be 1) the restricted concentrates feeding(1.9% of BW) during growing period and 2) the late slaughter age(22${\sim}$25 mo of age) in growing-fattening Holstein steers fed rice straw.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.1
• /
• pp.22-41
• /
• 1999

This study intended to analyze the health promoting behaviors, compare their factors according to the shift pattern of duties of women workers who were working in the industrial workplace and present basic data in planning systematic and effective programs of health promotion for three-shift system and day-duty. Using Quota Sampling, 219 women workers were selected as subjects from 5 workshops which had 50 settled workers up to 300 and 10 factories which had more than 300 located in Taegu and Kyung-Book Province. Data were collected by means of questionnaire from September 12 to September 30, 1998. As the instruments of the study were used Health Promotion Lifestyle Profile(HPLP) which was adapted and adjusted by Seo, Y. O. for health promoting behavior, the one developed by Moon, J. S. (1990) for health-belief, the one developed by Sherer et al.(1982) and then adapted by Oh, H. S. for self-efficacy, and the one developed by Park, J. W. (1985) for social support. The analysis of data were performed with Cronbach's ${\chi}^2$-test, t-test, ANCOVA, Kendal tau, Pearson correlation, Stepwise Multiple Regression test using SPSS program. The results of the study are as follows : 1. There was a significant difference in age(${\chi}^2=32.46$, p=0.000), career (${\chi}^2=18.47$, p=0.000), working day(t=-3.18, p=0.000) by the shift pattern of duties in terms of socio-demographic characteristics. 2. There was a statistically significant difference between the two groups on the health promoting behaviors (t=2,52, p=0.012). The score of three-shift group on health promoting behaviors was 2.27, showing that it was lower by .13 than that of day-duty group(2.40). 3. ANCOVA involving age, career and working day as covariables, which had revealed significant difference before, showed that health promoting behaviors by the shift patterns of duties was significantly different(F=4.88, p=0.028). 4. In consideration of variables that have an influence on health promoting behavior by the shift pattern of duties, social support occupied 19.4% of health promoting behavior in the three-shift group and 22.5% including the sense of self-efficacy. In the day-duty group, social support occupied 34.4% of health promoting behavior. 5. The score of three-shift group(2.94) was significantly lower than that of day-duty group(3.12) in the perceived benefit of health-belief(t= -3.29, p=0.001), while the score of three-shift group (2.48) was significantly higher than that of day-duty group(2.24) in the perceived barrier (t=4.22, p=0.000). In the sense of self-efficacy(t=-4.20, p=0.000), the score of three-shift group(3.24) was significantly lower than that of day-duty group(3.53) while in social support(t=-4.56, p=0.000) the one of three-shift group(2.64) was significantly lower than that of day-duty group(2.88). The suggestions are as follows on the basis of the results of this study : 1. It is required to develop health promoting program that takes the shift pattern of duties of women workers into consideration. In addition, there are special demands on developing nursing strategies for health promoting behavior of three-shift workers. 2. It is required to develop specific strategies for social support which is the most significant factor to the health promoting behavior for women workers. 3. It is necessary to develop some programs for improving the sense of self-efficacy, social support, and health-belief of three-shift workers. To achieve these tasks, industrial nurses should play an active role and improve the ability of self-health care of women workers.

• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.113-124
• /
• 2001

For veterinary imaging diagnosis, we obtained MR images of the canine brain, spine, kidney and pelvis from 3T MRI system which was equipped with the world first 3T active shield magnet. Spin echo (SE) and fast Spin Echo (FSE) images were obtained from the canine brain, spine, kidney and pelvis of normal and sick dogs using a homemade birdcage and transverse electromagnetic (TEM) resonators operating in quadrature and tuned to 128 MHz. In addition, we employed a homemade saddle shaped RF coil. Typical common acquisition parameters were as follows: matrix=512$\times$512, field of view (FOV)=20cm, slice thickness=3 w, number of excitations (NEX)=1. For T1-weighted MR images, we used TR=500 ms, TE=10 or 17.4 ms. For T2-weighted MR images, we used TR=4000 ms, TE=108 ms. Signal to noise ratio (SNR) of 3T system was measured 2.7 times greater than that of prevalent 1.57 system. The high resolution images acquired in this study represent more than a 4-fold increase in in-plane resolution relative to conventional images obtained with a 20 cm field of view and a 5 mm slice thickness. MR images obtained from 3T system revealed numerous small venous structures throughout the image plane and provided reasonable delineation between gray and white matter The present results demonstrate that the MR images from 3T system could provide better diagnostic quality of resolution and sensitivity than those of 1.5T system. The elevated SNR observed in the 3T high field magnetic resonance imaging can be utilized to acquire images with a level of resolution approaching the microscopic structural level under in vivo conditions. These images represent a significant advance in our ability to examine small anatomical features with noninvasive imaging methods. Moreover, MRI technique could begin to apply for veterinary medicine in Korea.

• Journal of Ginseng Research
• /
• v.30 no.3
• /
• pp.128-131
• /
• 2006

Saponin isolated from red ginseng was added to cultures of Staphylococcus aureus and Candida albicans in order to investigate saponin's influence on the growth of some pathogenic bacteria and yeasts. S. aureus and C. albicans were incubated at $38^{\circ}C\;and\;28^{\circ}C$ for 5 days with 100 rpm after addition of 0.013, 0.125, 0.500 and 1.000% (w/v, final concentration) of saponin, respectively. After incubated for 1 day, 2 days or 5 days, pH and viable cell counts of the cultures were investigated. The both of pH of S. aureus and C. albicans were decreased in concentration-dependent manner. Viable cell counts after incubation of 5 days were $1.0\;{\times}\;10^8,\;9.4\;{\times}\;10^7,\;1.0\;{\times}\;10^3$ and 0 CFU/ml, respectively, when compared with $1.8{\times}10^8\;CFU/ml$ of saponin non-treated group. Especially, 1.0% concentration of saponin inhibited completely the growth of S. aureus. While, viable cell count in C. albicans somewhat lower values than that of saponin non-treated group, but the values not significant. These results suggest that ginseng saponin inhibit the growth of S. aureus in a concentration-dependent manner, but not the growth of C. albicans.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2016

Over the past two decades, fiber-based lasers have made remarkable progress, now having reached power levels exceeding kilowatts and drawing a huge amount of attention from academy and industry as a replacement technology for bulk lasers. In this paper we review the significant factors that have led to the progress of fiber lasers, such as gain-fiber regimes based on ytterbium-doped silica, optical pumping schemes through the combination of laser diodes and double-clad fiber geometries, and tandem schemes for minimizing quantum defects. Furthermore, we discuss various power-limitation issues that are expected to incur with respect to the ultimate power scaling of fiber lasers, such as efficiency degradation, thermal hazard, and system-instability growth in fiber lasers, and various relevant methods to alleviate the aforementioned issues. This discussion includes fiber nonlinear effects, fiber damage, and modal-instability issues, which become more significant as the power level is scaled up. In addition, we also review beam-combining techniques, which are currently receiving a lot of attention as an alternative solution to the power-scaling limitation of high-power fiber lasers. In particular, we focus more on the discussion of the schematics of a spectral beam-combining system and their individual requirements. Finally, we discuss prospects for the future development of fiber laser technologies, for them to leap forward from where they are now, and to continue to advance in terms of their power scalability.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.560-569
• /
• 1999

Blood supply rather than nerve supply implies pulp vitality. To evaluate pulp vitality clinically, electric pulp test and thermal test which are based on sensory nerve response have been used in addition to many auxiliary data such as past dental history, visual inspection, radiographic examination, percussion, palpation and transillumination test. However, reactivity of the nerves to the stimulation is not synonymous with normalcy. Therefore measurement of pulpal blood flow using a laser Doppler flowmeter became a new trial to test the pulp vitality. The purpose of the present study was to evaluate normal pulpal blood flow level of maxillary teeth in adult to provide a guideline in determining the vitality of dental pulp. Pulpal blood flow was measured in maxillary central and lateral incisors, canines, first and second premolars and first molars of seventy nine adults of 22 - 30 years old using a laser Doppler flowmeter (PeriFlux 4001, Perimed Co., Stockholm, Sweden, 780 nm infrared laser, 1mW). For directly-made splints, silicone rubber impressions were taken directly from the mouth. For indirectly-made splints, alginate impressions were taken from the mouth and stone cast were made. After making depressions on the buccal surfaces of the cast teeth to indicate the hole positions, second impressions with vinyl polysyloxane putty were taken from the cast. Holes for the laser probes were made at the putty impressions 4mm above the gingival level. Laser probe (PF416 dental probe, 1.5mm) was inserted in the prepared hole and the splint was set in the mouth. After 10 minutes of patient relaxing, pulpal blood flow was recorded for 5 minutes on each tooth. The recorded flow was saved in the computer and calculated with a software 'Perisoft' version 5.1. Pulpal blood flow was also recorded in six teeth of five individuals with no response to electric pulp test and cold test, with periapical radiolucency, or with history of root canal treatment to compare with nonvital teeth. The difference between the mean flow values of each group of teeth were analyzed using one-way ANOVA and Duncan's Multiple Range test. The results were as follows: 1. The average pulpal blood flow values of all the tested teeth of each location were between 9 - 16 Perfusion Unit. Pulpal blood flow value was highest in maxillary lateral incisors, followed by first premolars, second premolars, canines, central incisors, and then first molars (p<0.01). 2. In six anterior teeth, indirectly-made splint group showed higher pulpal blood flow values than directly-made splint group (p<0.01). In posterior teeth, however, there was no significant flow value difference between directly-made splint group and indirectly-made splint one (p>0.05). 3. Teeth with vital pulps showed higher signal values than teeth with nonvital pulps (p<0.01), and the flow photographs showed heartbeat-synchronous fluctuations and vasomotions, while those were absent in non vital tooth.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.237-246
• /
• 2008

Purpose: If bone grafts and guided tissue regeneration are effective individually in treating osseous defects, then the questionis, what would happen when they are combined. Bone grafts using Calcium Carbonate(Biocoral) and Guided Tissue Regeneration using Calcium Sulfate(CALMATRIX) will maximize their advantages and show the best clinical results in intrabony defects. This study was to compare the effects of a combination of CS and CC with control treated only with modified widman flap in a periodontal repair of intrabony defects. Materials and Methods: 30 patients with chronic periodontitis were used in this study. 10 patients were treated with a combination of CS and CC as the experimental group II and another 10 patients were treated with CC as the experimental group I, and the remaining 10 patients, the control group were treated only with modified widman flap. Clinical parameters including probing depth, gingival recession, bone probing depth and loss of attachment were recorded 6 months later. Results: The probing depth changes were $3.30{\pm}1.34\;mm$ in the control group, $4.2{\pm}1.55\;mm$ in the experimental group I(CC) and $5.00{\pm}1.33\;mm$ in the experimental group II(CS+CC). They all showed a significant decrease 6 months after surgery(p<0.01). There was a significant difference(p<0.05) between the control and experimental group. However there were no significant difference(p<0.05) between the experimental group I and II. The gingival recession changes w $-1.30{\pm}1.25\;mm$ in the control group, This is a significant difference(p<0.01). However, there was a $-0.50{\pm}0.53\;mm$ change in the experimental group I(CC) and $-0.60{\pm}0.97\;mm$ in the experimental group II(CS+CC). In addition, in terms of gingival recession, there was a no significance difference(p<0.05) among the groups. The clinical attachment level changes were $2.00{\pm}1.33\;mm$ in the control group, $3.60{\pm}1.58\;mm$ in the experimental group I(CC) and $4.40{\pm}1.17\;mm$ in the experimental group II(CS+CC). They all showed a significant decrease 6 months after surgery(p<0.01). There was a significant difference(p<0.05) between the control and experimental group. However there was a no significance difference(p<0.05) between the experimental group I and II. The bone probing depth changes were $0.60{\pm}0.52\;mm$ in the control group, $3.20{\pm}1.48\;mm$ in the experimental group I(CC) and $4.60{\pm}1.43\;mm$ in the experimental group II(CS+CC). All of them showed a significant decrease 6 months after surgery(p<0.01), there was a significance difference(p<0.05) among the groups. Conclusion: Treatment using a combination of CS and CC have a potential to improve periodontal parameters in intrabony defects and More efficient clinical results can be expected in intrabony defects less than 2 walls grafted with CS and CC.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.39-48
• /
• 1999

This study was carried out to investigate the difference and genetic similarity at the level of molecular genetics. Genomic DNA was extracted from blood of Holstein, Korean cattle, Charolais, and hybrid between Korean cattle and charolais and RAPD(random amplified polymorphic DNAs) was analyzed by PCR(polymerase chain reaction). After genetic similarity value from different breeds are analyzed, genetic similarity was estimated by UPGMA(unweighted pair-group method using average). The results obtained from this study can be summarized as follows: 1. When genomic DNA which was extracted from different breeds was subjected to electrophoresis on 1.5% agarose gel, bigger than 12.2kb was appeared. Ratio by absorbance of $A_{260}/A_{280}$ was 1.75~2.10, indicating that genomic DNA was quite pure for RAPD analysis. 2. Different band patterns by RAPD were appeared according to the breeds in cattle. The best primer used to distinguish Holstein from other breeds was 5'-GAC CGC TTG T-3'. 3. A 340bp fragment was amplified in $33.0^{\circ}C$ of annealing temperature for the Holstein and Charolais breeds, but any amplification was not occurred in this annealing temperature for Korean cattle and hybrid. In addition, a 340bp fragment was amplified in $37.5^{\circ}C$ of annealing temperature for the Holstein and Korean cattle, but any amplification was not occurred in this annealing temperature for Charolais and hybrid. For the reaction of PCR. $37.5^{\circ}C$ and $33.0^{\circ}C$ of annealing temperature was shown to be best for genetic marker identification from Holstein, Charolais, and hybrid between Korean cattle and Charolais. 4. When genetic similarity from different breeds are analyzed at the both temperature of $33.0^{\circ}C$ and $37.5^{\circ}C$, the genetic similarity value of Holstein and Korean cattle, Holstein and Charolais, Korean cattle and Charolais, and Korean cattle and hybrid were 0.666~0.777, 0.615~0.666, 0.400~0.461 and 0.857~0.888, respectively. 5. It could be concluded that different breeds are capable of distinguishing by RAPD used random primer 5'-GAC CGC TTG T-3', genetic similarity from different breeds was appeared the higher genetic similarity value of Korean cattle and Charolais than that of Holstein between Korean cattle and Charolais by UPGMA.