• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1725-1728
• /
• 2009

본 연구개발에서는 정해진 환경에서 최대의 불량검출 능력을 발휘할 수 있도록 공정을 개선하기 위하여 전게이트 시각검사에 필수적인 FGV 패턴발생 장치와 공정제어 장치를 개발하였다. 본 연구개발을 통하여 접촉손실(Tact Loss)을 0에 근접 한 수준으로 유지할 뿐만 아니라 손실 및 에러 발생시 신속한 대처가 가능하여 모듈의 수율을 향상시킬 수 있을 것으로 기대된다. 또한 세부 동작 시퀀스를 제어하기 위한 H/W와 S/W 시스템을 생산라인에 실장하고 성능점검 및 인증을 수행한 결과 Tact에 의한 Pixel 불량의 경우는 98.1%, Line 불량의 경우는 99.1%의 검출율을 나타내었으며, Gate 및 Visual 레벨 테스트를 포함한 모듈공정 전체의 수율이 98.3%까지 증가하였다.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.147-153
• /
• 2007

This study sought to investigate the reaction of Co-binder containing tungsten with molten zinc. Four kinds of Co-W alloys (pure, 10%W, 20%W, 30%W) were prepared using the powder metallurgy method. The specimens were immersion-tested in molten pure zinc baths at $460^{\circ}C$. To evaluate the corrosion property in molten zinc, the weight loss of the specimen was measured after the immersion tests at different immersion times (10~300 min.). Co-10%W alloys, compared with pure cobalt, showed no effect of tungsten addition on the reaction rate in molten zinc. The relationship between the weight loss and the square root of immersion period represents a straight line in both pure cobalt and Co-10%W alloy. The Co-Zn reaction layer in Co- 1O%W alloy consists of $\gamma2$, $\gamma1$, $\gamma$ and ($\beta1$ phases. The rate of weight loss significantly increases and the weight loss behavior is not well accord with the linear relationship as the tungsten content in the Co-W alloy increases. The $\beta1$ layer was not formed on the Co-20%W alloy and neither was a stable Co-Zn intermetallic compound layer found on the Co-30%W alloy. The main cause of increase in reaction rate with increasing tungsten content is related with the instability of the Co-Zn reaction phases as seen on micro-structural analysis.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1125-1131
• /
• 2012

농촌 노동력의 급격한 감소 및 고령화에 따라 저가의 농업로봇의 개발이 시급한 과제가 되어왔다. 본 논문에서는 농업용 방제 로봇의 H/W제어구조 및 S/W 플랫폼 개발에 대하여 기술한다. 개발된 로봇은 2 축의 캐터필러형 구동부와 2축의 방제기구 제어부를 구동부로 갖추고 있다. H/W 제어구조로써, 임베디드 XPE 기반 로봇 제어부, 원격 조종부, 그리고 센서 제어부로 구성된다. SW 플랫폼에서는 태스크 매니저, 원격 영상 및 데이터 통신을 위한 TCP-IP 통신 프로세스, 구동부 제어 프로세스, 위치 및 환경 인식 프로세스, 센서제어부 프로세스 등 5개의 프로세스가 동시에 동작한다. 개발된 농업용 원격 방제로봇을 필드테스트를 통하여 유용성을 시험하였다.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.253-258
• /
• 2013

본 논문에서는 W-band(75~110 GHz) 자유공간 물질상수 측정법을 논의하였다. 우선 자유공간에서 주위 환경에 영향을 덜 받으면서 피측정물(MUT: Material Under Test)에 의한 산란계수를 정확하게 측정하기 위한 W-band quasi-optical 기술 기반 자유공간 물질상수 측정시스템을 논의하고, 관련 측정시스템의 GRL(Gated Reflect Line) 교정법을 기술하였다. 그리고 공기를 피측정물로 하여 제안된 측정법의 타당성을 보이고, 두께가 1.1 mm, 2 mm, 2.75 mm, 5 mm인 arystal 평판에 대한 측정 결과를 제시하였다.

• 한국축산식품학회지
• /
• 제40권2호
• /
• pp.183-196
• /
• 2020

The protective effect of pig skin gelatin water extracts (PSW) and the low molecular weight hydrolysates of PSW generated via enzymatic hydrolysis with Flavourzyme® 1000L (LPSW) against scopolamine-induced impairment of cognitive function in mice was determined. Seventy male ICR mice weighing 20-25 g were randomly assigned to seven groups: Control (CON); scopolamine (SCO, 1 mg/kg B.W., intraperitoneally (i.p.); tetrahydroaminoacridine 10 [THA 10, tacrine; 10 mg/kg B.W. per oral (p.o.) with SCO (i.p.)]; PSW 10 (10 mg/kg B.W. (p.o.) with SCO (i.p.); PSW 40 (40 mg/kg B.W. (p.o.) with SCO (i.p.); LPSW 100 (100 mg/kg B.W. (p.o.) with SCO (i.p.); LPSW 400 (400 mg/kg B.W. (p.o.) with SCO (i.p.). All treatment groups, except CON, received scopolamine on the day of the experiment. The oxygen radical absorbance capacity of LPSW 400 at 1 mg/mL was 154.14 μM Trolox equivalent. Administration of PSW and LPSW for 15 weeks did not significantly affect on physical performance of mice. LPSW 400 significantly increased spontaneous alternation, reaching the level observed for THA and CON. The latency time of animals receiving LPSW 400 was higher than that of mice treated with SCO alone in the passive avoidance test, whereas it was shorter in the water maze test. LPSW 400 increased acetylcholine (ACh) content and decreased ACh esterase activity (p<0.05). LPSW 100 and LPSW 400 reduced monoamine oxidase-B activity. These results indicated that LPSW at 400 mg/kg B.W. is a potentially strong antioxidant and contains novel components for the functional food industry.

• Wind and Structures
• /
• 제14권4호
• /
• pp.285-300
• /
• 2011

Researchers at the International Hurricane Research Center (IHRC), Florida International University (FIU), are working in stages on the construction of a large state-of-the-art Wall of Wind (WoW) facility to support research in the area of Wind Engineering. In this paper, the challenges of simulating hurricane winds for the WoW are presented and investigated based on a scale model study. Three wind profiles were simulated using airfoils, and/or adjustable planks mechanism with and without grids. Evaluations of flow characteristics were performed in order to enhance the WoW's flow simulation capabilities. Characteristics of the simulated wind fields are compared to the results obtained from a study using computational fluid dynamics (CFD) and also validated via pressure measurements on small-scale models of the Silsoe cube building. Optimal scale of the test model and its optimal distance from the WoW contraction exit are determined - which are two important aspects for testing using an open jet facility such as the WoW. The main objective of this study is to further the understanding of the WoW capabilities and the characteristics of its test section by means of intensive tests and validations at small scale in order to apply this knowledge to the design of the full-scale WoW and for future wind engineering testing.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.59-63
• /
• 2005

The 800-kW PM (permanent magnet) synchronous generator is developed as a wind power generator. The matching converter is designed to control the torque and power depending on the wind speed regime. The generator starts to generate the power at the speed of 9 rpm and the rated output is generated at the speed of 25 rpm. The rated output power of an inverter is 750 kW when the PM synchronous generator is delivering 800 kW to the inverter. The inverter is specially designed to perform the maximum power point tracking (MPPT) at the low wind speed regime that is typical wind environment in Korea. The inverter test was done with a 2 MW M-G system at KERI (Korea Electric Research Institute). The M-G set has a 2 MW motor driver and a 38:1 gear to match the speed between the motor and the PM generator. The torque simulating the wind is applied to the PM generator by a DC motor. The test results show the inverter efficiency of $94.3\%$ at the rated power generating condition. The measured values show that the MPPT algorithm is working well. Overall reliability will be verified through the long-term site test.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.765-774
• /
• 2002

Suppose one is given a vector X of a finite set of quantities $X_i$ which are independent Poisson random variables. A null hypothesis $H_0$ about E(X) is to be tested against an alternative hypothesis $H_1$. A quantity $\sum\limits_{i}w_ix_i$ is to be computed and used for the test. The optimal values of $W_i$ are calculated for three cases: (1) signal to noise ratio is used in the test, (2) normal approximations with unequal variances to the Poisson distributions are used in the test, and (3) the Poisson distribution itself is used. The above three cases are considered to the situations that are without background noise and with background noise. A comparison is made of the optimal values of $W_i$ in the three cases for both situations.

• 한국정보통신학회논문지
• /
• 제13권8호
• /
• pp.1693-1698
• /
• 2009

본 논문에서는 서명에서 생성되는 속도 성분(방향 정보, 거리 정보)에서 방향 정보만을 특징 정보로 서명DB에서 저장하고 거리(속력) 정보는 조정상수(w)를 이용함으로써 오류율에 영향을 주지 않으면서 처리속도를 개선하고, 특징 정보 크기도 줄일 수 있었다. 이를 위해 통계적 검정 T-test를 이용하여 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.830-833
• /
• 2006

In this work, we provided a novel test method to verify the sealing materials for flexible LCD cell. The ultraviolet type curing sealing material with low process temperature was suitable for LCD cell assembly. We also proposed the sealing materials which passed 13200 times bending test within 20 mm curvature.