• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.377-387
• /
• 2023

Ni-W/Al₂O₃ nano-composites were electrodeposited on mild steel substrate for mechanical and corrosion resistance applications. This study focused on the preparation of Ni-W/Al₂O₃ nano-composite coating with various quantity of Al₂O₃ incorporations. The addition of Al₂O₃ in the electrolytes were varied from 1-10 g/L in electrolytes and the Al₂O₃ incorporation in Ni-W/Al₂O₃ nano-composite coatings were obtained from 1.82 to 13.86 wt.%. The incorporation of Al₂O₃ in Ni-W alloy matrix influenced the grain size, surface morphology and structural properties were observed. The distributions of Al₂O₃ particle in alloy matrix were confirmed using electron microscopy (FESEM and TEM) and EDAX mapping analysis. The crystal structure informations were studied using X-ray diffraction method and it confirms that the deposits having cubic crystal structure. The better corrosion rate (0.87 mpy) and microhardness (965 HV) properties were obtained for the Ni-W/Al₂O₃ nano-composite coating with 13.86 wt.% of Al₂O₃ incorporations.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.228-231
• /
• 2004

Ta(5 nm)/NiFe(11 nm)/FeMn(16 nm) Ta(5 nm)과 Ta(5 nm)/NiFe(11 run)/FeMn(16 nm)/NiFe(7 nm)/Ta(5 nm) 다층박막구조를 제작하여, Laser의 power, 조사 위치, 자장의 방향에 따라 자기저항(MR)비와 교환결합력(H$_{ex}$) 자기적 특성을 연구하였다. Laser 열처리는 power를 440 mW까지 증가시키면서 FeMn/NiFe 이중박막을 15분 씩 Laser로 조사하여, 200 mW에서부터 음의 자기장에서 자기저항곡선의 피크가 발생하기 시작하였다. 400 mW까지 증가시키면서 양의 자기장에서 자기저항곡선의 MR비와 H$_{ex}$:가 각각 0.9%에서 0.1%로, 87 Oe에서 76 Oe로 감소하였고, 음의 자기장 피크에서는 MR비와 H$_{ex}$가 모두 증가하였다. 또한 NiFe/FeMn/NiFe삼중박막에서도 같은 결과를 얻었다. 300 mA로 laser열처리한 면적을 증가시켰을 때 자기저항곡선이 positive 피크는 감소하고 negative 피크는 증가하였다. 이러한 Laser 열처리효과에 의해 결과적으로 교환결합된 박막구조의 국소적 자화반전을 가능하게 하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.75-75
• /
• 1994

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.32-32
• /
• 2001

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.54-61
• /
• 2016

Screen printing of commercially available Ag paste is the most widely used method for the front side metallization of Si solar cells. However, the metallization using Ag paste is expensive and needs high temperature annealing for reliable contact. Among many metallization schemes, Ni/Cu/Sn plating is one of the most promising methods due to low contact resistance and mass production, resulting in high efficiency and low production cost. Ni layer serves as a barrier which would prevent copper atoms from diffusion into the silicon substrate. However, Ni based schemes by electroless deposition usually have low thermal stability, and require high annealing process due to phosphorus content in the Ni based films. These problems can be resolved by adding W element in Ni-based film. In this study, Ni-W-P alloys were formed by electroless plating and properties of it such as sheet resistance, resistivity, specific contact resistivity, crystallinity, and morphology were investigated before and after annealing process by means of transmission line method (TLM), 4-point probe, X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.204-204
• /
• 2011

최근 자동차수명의 연장, 고품질, 내식내마모성 향상의 요구에 따라 아연도금 및 합금도금의 친환경화, 아연합금도금특성 향상, 흑색화 실현, 아연-철, 아연-니켈 벤딩성 향상, 주석-아연 합금도금과 무전해 Ni-W-P, Ni-B-W, 전해 NiSiC-PTFE, Ni-Diamond복합도금 등의 도금현장 적용과 도금 후 3가 크로메이트 도장 밀착성에 대한 품질기술지원이 요구되고 있다.

• 한국분말재료학회지
• /
• 제14권3호
• /
• pp.208-214
• /
• 2007

The microstructure and hardness of (W,Ti)C cemented carbides with a different metallic binder composition of Ni and Co fabricated by powder technology were investigated. The densifications of the prepared materials were accomplished by using vacuum sintering at $1450^{\circ}C$. Nearly full dense (W,Ti)C cemented carbides were obtained with a relative density of up to 99.7% with 30 wt.% Co and 99.9% with 30 wt.% Ni as a metallic binder. The average grain size of the (W,Ti)C-Co and the (W,Ti)C-Ni was decreased by increasing the metallic binder content. The hardness of the dense (W,Ti)C-15 wt%Co and (W,Ti)C-15 wt%Ni, was greater than that of the other related cemented carbides; in addition, the cobalt-based cemented carbides had greater hardness values than the nickel-based cemented carbides.

• 한국표면공학회지
• /
• 제44권6호
• /
• pp.250-254
• /
• 2011

NiO-AZO films were deposited on glass substrate by DC and RF magnetron co-sputtering system in pure $O_2$ gas without substrate heating during deposition. In order to control the chemical composition of the film, NiO target was supplied with constant RF power of 150 W and AZO target (doped with 2.98 at% aluminum) with DC power varied between 40 W to 80 W. Deposited NiO-AZO films were evaluated by structural and chemical analysis. With introducing AZO, XRD and XPS data reveal that NiO were supplied with more oxygen. these results could be strongly affected by the higher bond enthalpy of NiO compared to ZnO, which makes it possible for NiO to obtain excessive oxygen from ZnO.

• 한국자기학회지
• /
• 제5권1호
• /
• pp.15-20
• /
• 1995

연자성재료인 Mn-Zn 페라이트에 미량의 첨가물로 CaO(0.1 mol%), NiO(0.0~6.0 mol%) 그리고 CoO(0.0~0.8 mol%) 첨가하여 20 종류의 시료를 공침법으로 제조하여, 첨가물의 첨가량에 따른 Mn-Zn 페라이트의 자기적 성질을 연구하였다. NiO, CoO의 첨가량이 증가함에 따라 초기투자율은 감소하고, 반면 Curie 온도는 증가하였다. 보자력$(H_{c})$, 포화자화$(B_{s})$ 및 자기이력손실$(W_{h})$은 NiO의 첨가량이 증가함에 따라 증가하는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1002-1006
• /
• 1997

1H NMR spectra of D2O solutions containing 2,2-dimethylaziridine (1) or 2-methylaziridine (2) and [SiW11COⅡO39]6- (SiW11Co) or [SiW11NiⅡO39]6- (SiW11Ni) exhibit separate signals for the free ligand and the complex, indicating that the ligand exchange is slow on the NMR time scale. Identified are two linkage isomers with the methyl group of 2 at trans or cis position with respect to the metal. The isotropic shifts of 1 and 2 coordinated to SiW11Ni originate mainly from the contact shifts, and they agree reasonably with the relative values reported for similar ligands coordinated to bis(2,4-pentanedionato)nickel(Ⅱ). The isotropic shifts for the SiW11Co complexes were separated into contact and pseudocontact contributions. The pseudocontact shifts show that (χ∥-χ⊥) is positive, while that for the SiW11Co complexes of pyridine derivatives is negative. This result indicates that the ordering of dxy and dxz, dyz orbitals in SiW11Co complexes can be reversed by ligands.