• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.593-594
• /
• 2010

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.70-73
• /
• 2007

생활수준의 향상으로 인하여 조명 및 디스플레이 제품을 이용하여 건물 및 건축물에 대하여 장식을 하는 것이 일반화 되어가고 있다. 본 연구에서는 옥외 및 옥내에 사인물로 사용되어지고 있으며 설치가 간편한 디스플레이 조명기기인 LED Tile을 개발하여 옥내 및 옥외용 디스플레이 조명 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 최적화된 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 패턴 동작(점멸, 광색가변)이 가능하도록 펌웨어를 설계하였다. 그 결과 설계된 LED Tile은 전체 크기가 $D130{\times}W130{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 60cd를 실현하였으며, LED Tile의 동작개수에 관계없이 설치가 간단하며 10개 이상의 디스플레이 패턴 제어가 가능하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.26-32
• /
• 2013

The LED has the proportional characteristic between the flux of light and its current and has caused voltage-current deviation on production process. Thus the unbalancing of each LED strings current occurred by its characteristic deviation. This unbalancing reduce a uniformity of the flux of light. Therefore, we researched to design method the LED driver based on DSP and the balancing transformer for a LED current balancing. These are applied to 50W LED module consist of 4 parallel strings. We analyzed the reduction of LED currents unbalance by experimental result from each method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.31-33
• /
• 2013

종래의 전구식 등명기의 경우 중량이 많이 나갈 뿐만 아니라 전구의 교체시기가 짧고 전력소모가 심하다는 문제가 있었다. 또한 5mm 포탄형 저휘도 LED램프의 경우에는 수명이 길고 저전력이라는 장점이 있으나, 근래에는 해상의 배후광이 높아져 개당 소비전력이 1W(와트) 이상인 고휘도 파워 LED를 광원으로서 채택하는 등명기가 등장하고 있는 실정이다. 그런데, 이러한 고휘도 파워 LED의 경우 종래의 포탄형 LED에 비하여 광도는 매우 높으나, 소비전력이 상대적으로 매우 높으며, 그에 따라 발열이 심하다는 문제가 있다. 따라서, 고휘도 파워 LED를 채용하여 등명기의 광도를 높이는 경우에는 반드시 방열 문제를 고려해야 한다. 그렇지 않으면, 고휘도 파워 LED의 발열로 인하여 제품이 안정적으로 구동할 수 없으며, 결국에는 관련 부품의 고장이나 파손으로 이어지기 때문이다. 본 연구는 종래의 전구식 램프나 저전력 포탄형 LED램프를 대체하여 고휘도 파워 LED램프를 광원으로 적용함에 있어, 등명기의 중량을 증가시키지 않는 구조로서 보다 효과가 우수한 방열기술을 개발하기 위한 것이다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1671-1672
• /
• 2006

사인물의 대명사인 네온사인 및 옥외용 광고 조명기기를 대체할 수 있는 LED Lighting Bar를 개발하여 옥외용 광고 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 컴팩트한 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 네온사인 동작(점멸, 광색가변)이 일어나도록 소프트웨어를 설계하였다. 그 결과, 설계된 LED Lighting Bar는 전체 크기가 $D150{\times}W50{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 70cd를 실현하였으며, LED Lighting Bar의 동작개수에 관계없고 설치가 간단하며 10개 이상의 사인 패턴 제어가 가능하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.105-109
• /
• 2019

LED lighting is used as artificial lighting for plant growth because it has high light efficiency and can radiate light of various wavelengths. In this paper, we have developed new structure LED lighting module to improve the performance of LED lighting for plant growth and proposed a lighting control system that can be controlled wirelessly. The proposed LED lighting module was fabricated using optical lens applied to tunnel light and simulated using Relux program. Results of simulation, we confirmed that the light distribution and average illuminance of the proposed lighting were improved. LED lighting control system was developed to wirelessly control R, G, B, W LED lighting according to plant type and growing season. Therefore, it is expected to provide the optimal lighting environment for plant growth and contribute to the improvement of farm productivity and convenience.

• The Journal of Korean Physical Therapy
• /
• v.27 no.3
• /
• pp.140-146
• /
• 2015

Purpose: To determine the effects of 630 nm light emitting diode (LED) on full-thickness wound healing. Methods: Twelve male Sprague-Dawley rats were randomly divided into LED (n=6) and control group (n=6). Two $19.63mm^2$ wounds were created on the mid dorsum. LED group received a 630 nm LED irradiation with $3.67mW/cm^2$ for 30 minutes ($6.60J/cm^2$) for 7 days, while control group received sham LED irradiation. Epithelial gap, collagen density, ${\alpha}$-SMA fibroblast and PCNA keratinocyte were measured on histochemical and immunohistochemical staining using image analysis system. An independent t-test was conducted to compare the difference between groups. Results: The wound closure rate, collagen density, ${\alpha}$-SMA fibroblast number, epithelial gap and PCNA keratinocyte number have shown no significant difference between LED and control group at day 3 after the treatment. At day 7 after the treatment, the wound closure rate in LED group was increased when compared with control group (p<0.05). The collagen density (p<0.05) and ${\alpha}$-SMA immunoreactive fibroblast number (p<0.001) were increased when compared with control group at day 7. The epithelial gap in LED group was significantly shorten than control group at day 7 (p<0.01). The PCNA positive cell number in LED group was higher than control group at day 7 (p<0.01). Conclusion: 630 nm LED with $3.67mW/cm^2$, $6.60J/cm^2$ accelerate collagen deposition by stimulating fibroblasts, and enhance wound contraction by differentiating myofibroblasts in the dermis, and accelerate keratinocyte proliferation by facilitating DNA synthesis in the epidermis. It may promote the healing process in proliferation stage of wound healing.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.96-102
• /
• 2016

In order to establish the basic data for the active use of the LED light source in the aquaculture industry, the experiment about the behavior of rockfish (Sebastes inermis) corresponding to the LED light was conducted by image analysis. LED lights for the experiment were one red light (wave length: 622 nm; light power: 811 mW) and two green lights (wave length: 518 nm; light power: 648 mW, wave length: 518 nm; light power: 810 mW). Behavior of the rockfish was analyzed using a moving distance (MD5) for 5 minutes where MD5s during the period of feeding were 20.0 m, 19.6 m, 16.3 m and 20.5 m in the ch1, ch2, ch3 and ch4. At the sunrise, mean MD5 of the entire channel about right before and right after were 6.3 m and 8.2 m. At the sunrise, mean MD5s of the entire channel about right before and right after were 13.6 m and 12.0 m. In the ch1, ch2 and ch3, mean MD5s during the period of 24 hours were 13.2 m, 9.6 m and 6.8 m at experiment 1and 5.2 m, 3.8 m and 2.9 m in the experiment 2.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.337-345
• /
• 2012

One of representative Korean fisheries, jigging and angling has 5,700 vessels for squid and hairtail. Hairtail angling is the most typical fishery in Jeju and has an enormous impact on regional economy. However, the price hike in oil and labor costs triggered the necessity of developing a high efficient and energy saving fish luring lamp in recent times. For that reason, this study aimed to analyze the fishing performance of the aircooled LED lamp targeting hairtail angling fishery. The experiment was conducted from September through October in 2009-2011 for a 9.77 ton of fishing vessel setting up 100 lamps. The fishing performance was tested compared with 6 vessels using metal halide lamps in the same waters. As the LED lamp's performance goes up, different lamps were used in 2008 for 80W, 2009 for 120W and 2011 for 180W respectively. The catch and CPUE of the experimental vessel have gradually increased respectively taking the $4^{th}$ and $6^{th}$ place in 2009, the $4^{th}$ and $2^{nd}$ place in 2010, the $1^{st}$ and $1^{st}$ place in 2011 among the 7 vessels. In summary, the LED fishing lamp showed higher fishing performance than comparison groups. It saved 33% of oil consumption and cut down on operating expenses and greenhouse gases emission.