• Korean Journal of Veterinary Research
• /
• v.41 no.2
• /
• pp.211-218
• /
• 2001

The $M_r$ 63,000 glycoprotein (GP63) and lipophosphoglycan (LPG) of Leishmania donovani were evaluated as vaccine candidates against visceral leishmaniasis. Mice were immunized with liposomeencapsulated GP63 and/or LPG that were purified from the soluble extract of L. donovani promastigotes, and were challenged with virulent amastigotes. Mice immunized with GP63/LPG in liposomes plus BCG resulted in a 27.4% reduction of amastigotes in the liver compared to the control group (liposomes plus BCG), and mice immunized with liposome-GP63 plus BCG failed to induce a protective immune response against the challenge infection. Immunization of mice with GP63 fused to the Schistosoma japonicum glutathione S-transferase (GP63-GST) plus BCG also failed to elicit protective immunity. To analyze the cause of failure to induce protection, cytokine release from the spleen cells of immunized mice and Leishmania-specific serum antibodies were analyzed. Spleen cells from mice immunized with GP63-GST plus BCG that were exposed to soluble extract of L. donovani in vitro produced 10-fold greater quantities of IFN-gamma and 3-fold greater quantities of IL-5 than cells from mice receiving BCG only or saline. Western blot analysis revealed that sera from these mice had Leishmania-specific antibodies recognizing 1 to 3 antigens of L. donovani with M. W. of 60-65 kDa. Although immunization of mice with GP63-GST induced a strong Th1 response, this study indicated that GP63-GST simultaneously elicited the Th2 response of the CD4+ T-cell, which was known to abrogate the protective immune response conferred by the Th1 effector function.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.429-436
• /
• 2007

The INRA124 is a bovine Y-chromosomal specific microsatellite locus that has been revealed a polymorphism. This locus has two alleles. The 132 bp allele is specific to cattle (humpless) of taurine origin and the 130 bp allele is specific to cattle (humped) of indicine origin. A total 822 males of 20 breeds or populations; North Eastern Asian breeds (Hanwoo, Korean Black cattle, Chik-so, CBK, Japanese Black cattle, Japanese Brown cattle, Yanbian cattle), Chinese yellow cattle (Luxi cattle, Nanyang cattle), European origin (Angus, Hereford, Charolais, Simmental, Brown swiss, Holstein, Limousin), African origin (Kavirondo zebu, White Fulani, crossbreed of N'Dama and Boran), Indian origin (Sahiwal) were characterized the distribution of alleles using INRA124 locus. Any individuals of European, Japanese origins and Hanwoo were not detected 130 bp allele, Bos indicus specific allele. Bos indicus breeds of Indian and African origins were not detected 132 bp allele, Bos taurus specific allele. CBK population that the crossbreed of Hanwoo, Brahman and Charolais showed the frequency of 0.19 in indicine specific allele. The breeds of Chinese mainland, Luxi and Nanyang cattle were detected 0.46 and 0.29 frequencies in indicine specific allele, respectively. These results suggest that Korean cattle, Hanwoo, had not been originated from a crossbred between Bos primigenius in Europe and Bos indicus in India.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.515-522
• /
• 2007

To develop the manufacturing method of ice cream with microbiologically safe and proper sensory quality using irradiation for sensitive consumer, 3 different flavors, which were resistant to their flavors against irradiation, were selected and used for ice cream manufacturing to reduce the irradiation-induced off-flavor problem. The general composition was not different among treatments. Total aerobic bacteria were detected as 2.38, 1.23, 1.38, and 1.15 log CFU/g level in ice cream with control(no flavor added), spearmint, mint, and citrus flavor, respectively. No viable cells were observed by irradiation at 1 kGy except for the control. Sensory evaluation indicated that the irradiated ice cream with spearmint flavor at 1 kGy and citrus flavor at 3 kGy had higher overall acceptability. Therefore, a low dose irradiation (less than 3 kGy) with mint or citrus flavors may enhance the safety of ice cream with proper sensory quality for sensitive consumer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.142-145
• /
• 2005

AC-PDP에서 발광 휘도와 발광 효율의 개선은 매우 중요한 과제중의 하나이다. 높은 발광 휘도와 발광 효율을 위해선 VUV의 높은 발광 효율이 요구되어진다. 이 실험에서는 AC-PDP에서 Ne-Xe의 2원 혼합기체와 He-Ne-Xe의 3원 혼합기체의 VUV 발광 세기를 측정하였다. 기체 압력은 200 Torr, 300 Torr, 400 Torr, 500 Torr로 유지하였고, Xe 혼합비는 1%, 2%, 4%, 7%, 10%, 15%를 사용하였다. 진공자외선 발광 세기는 He-Ne-Xe의 3원 혼합기체가 Ne-Xe의 2원 혼합기체보다 발광 세기가 훨씬 높다는 것을 알 수 있었다. 그리고 Xe 함량이 증가함에 따라 공명선인 147 nm의 발광 세기는 Xe 혼합비가 약 10%까지는 증가하다가 10% 이후에는 포화되고, 반면 분자선인 173 nm은 Xe 함량과 가스 압력이 증가함에 따라 발광 세기가 증가하였다.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.18-24
• /
• 1998

Polyurethane (PU) synthesized from 4,4'-diphenylmethane diisocyanate having high functionality (f=2.9) and polyester polyol have been investigated by differential scanning calorimeter (DSC), dynamic mechanical thermal analyzer (DMTA), and Fourier transform infrared spectroscope (FT-IR). From the DSC measurement of polyurethane, a single transition temperature ($T_g$) was observed. This result indicates that polyurethanes synthesized in this work have homogeneous network structure due to high functionality of diisocyanate. It was also found that the $T_g$ of polyurethane was increased as hard segment content was increased. The results from DMTA measurement are consistent with DSC results. In order to investigate the effect of thermal annealing on the $T_g$ of polyurethane, the samples were annealed at various annealing conditions. $T_gs$ of polyurethanes were found to increased with annealing temperature. From swelling experiment and FT-IR studies, it was found that the $T_g$ was increased as crosslinking density of polyurethane was increased.

• Journal of Animal Science and Technology
• /
• v.61 no.5
• /
• pp.260-271
• /
• 2019

The objective of this study was to determine the effect of different stocker management programs on skeletal muscle development and growth characteristics, satellite cell (SC) activity in growing-finishing beef cattle as well as the effects of SC-conditioned media on preadipocyte gene expression and differentiation. Fall-weaned Angus steers (n = 76; $258{\pm}28kg$) were randomly assigned to 1 of 4 stocker production systems: 1) grazing dormant native range (NR) supplemented with a 40% CP cottonseed meal-based supplement ($1.02kg{\cdot}steer^{-1}{\cdot}d^{-1}$) followed by long-season summer grazing (CON, 0.46 kg/d); 2) grazing dormant NR supplemented with a ground corn and soybean meal-based supplement fed at 1% of BW followed by short-season summer grazing (CORN, 0.61 kg/d); 3) grazing winter wheat pasture (WP) at high stocking density (3.21 steers/ha) to achieve a moderate rate of gain (LGWP, 0.83 kg/d); and 4) grazing winter WP at low stocking density (0.99 steers/ha) to achieve a high rate of gain (HGWP, 1.29 kg/d). At the end of the stocker (intermediate harvest, IH) and finishing (final harvest, FH) phases, 4 steers / treatment were harvested and longissimus muscles (LM) sampled for cryohistological immunofluorescence analysis and SC culture assays. At IH, WP steers had greater LM fiber cross-sectional area than NR steers; however, at FH, the opposite was observed (p < 0.0001). At IH, CORN steers had the lowest Myf-5+:Pax7+ SC density (p = 0.020), while LGWP steers had the most Pax7+ SC (p = 0.043). At FH, CON steers had the highest LM capillary density (p = 0.003) and their cultured SC differentiated more readily than all other treatments (p = 0.017). At FH, Pax7 mRNA was more abundant in 14 d-old SC cultures from HGWP cattle (p = 0.03). Preadipocytes exposed to culture media from proliferating SC cultures from WP cattle isolated at FH had more $PPAR{\gamma}$ (p = 0.037) and less FABP4 (p = 0.030) mRNA expression compared with NR cattle. These data suggest that different stocker management strategies can impact skeletal muscle growth, SC function, and potentially impact marbling development in growing-finishing beef cattle.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.2-11
• /
• 2021

Objective: The aim of the study was to evaluate the influence of polymorphic loci and other factors on milk performance and the technological properties of milk. Methods: The analysis was performed on Simmental and Holstein cows in field conditions (n = 748). Milk yield in kg, fat and protein percentage and yield were evaluated. Technological properties were evaluated by milk fermentation ability, renneting, and an alcohol test. Polymorphisms in the acyl-CoA diacylgycerol transferase 1 (DGAT1), leptin (LEP), fatty acid synthase (FASN), stearoyl CoA desaturase 1 (SCD1), casein beta (CSN2), casein kappa (CSN3), and lactoglobulin beta genes were genotyped, and association analysis was performed. Results: The DGAT1 AA genotype was associated with higher milk, protein and fat yields (p<0.05). The MM genotype in the LEP gene was associated with a lower protein percentage and the W allele with a higher protein percentage (p<0.05). In cows with the FASN GG genotype, the protein percentage was higher, but the A allele was associated with higher milk, protein and fat yields than the G allele. The TT genotype in SCD1 was associated with the lowest milk, protein and fat yields and with the highest milk protein percentage (p<0.01). The T allele had higher values than the C allele (p<0.05) except for fat percentage. The genotype CSN3 AA was associated with a significantly heightened milk yield; BB was associated with a high protein percentage. The effect of the alleles on the technological properties was not significant. The CSN2 BB genotype was associated with the best alcohol test (p<0.01), and the renneting order was inverse. Milk from cows with the CSN2 A1A1 genotype was best in the milk fermentation ability. CSN3 significantly affected the technological properties. Conclusion: The findings revealed the potential of some polymorphic loci for use in dairy cattle breeding and for the management of milk quality. In field research, the pivotal role of farms in milk yield, composition and technological properties was confirmed.

• Journal of The Korean Astronomical Society
• /
• v.55 no.5
• /
• pp.173-194
• /
• 2022

We complete the survey for finite-source/point-lens (FSPL) giant-source events in 2016-2019 KMTNet microlensing data. The 30 FSPL events show a clear gap in Einstein radius, 9 𝜇as < 𝜃_E < 26 𝜇as, which is consistent with the gap in Einstein timescales near t_E ~ 0.5 days found by Mróz et al. (2017) in an independent sample of point-source/point-lens (PSPL) events. We demonstrate that the two surveys are consistent. We estimate that the 4 events below this gap are due to a power-law distribution of free-floating planet candidates (FFPs) dN_FFP/d log M = (0.4 ± 0.2) (M/38 M_⊕)^-p/star, with 0.9 ≲ p ≲ 1.2. There are substantially more FFPs than known bound planets, implying that the bound planet power-law index 𝛾 = 0.6 is likely shaped by the ejection process at least as much as by formation. The mass density per decade of FFPs in the Solar neighborhood is of the same order as that of 'Oumuamua-like objects. In particular, if we assume that 'Oumuamua is part of the same process that ejected the FFPs to very wide or unbound orbits, the power-law index is p = 0.89 ± 0.06. If the Solar System's endowment of Neptune-mass objects in Neptune-like orbits is typical, which is consistent with the results of Poleski et al. (2021), then these could account for a substantial fraction of the FFPs in the Neptune-mass range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.174-174
• /
• 2000

A strong antiferromagnetic coupling in Fe/Si multilayered films (MLF) had been recently discovered and much consideration has been given to whether the coupling in the Fe/Si MLF system has the same origin as the metal/metal MLF. Nevertheless, the nature of the interfacial ron silicide is still controversial. On one hand, a metal/ semiconductor structure was suggested with a narrow band-gap semiconducting $\varepsilon$-FeSi spacer that mediates the coupling. However, some features show that the nature of coupling can be well understood in terms of the conventional metal/metal multilayered system. It is well known that both magneto-optical (MO) and optical properties of a metal depend strongly on their electronic structure that is also correlated with the atomic and chemical ordering. In this study, the nature of the interfacial regions is the Fe/Si multilayers has been investigated by the experimental and computer-simulated MO and optical spectroscopies. The Fe/Si MLF were prepared by rf-sputtering onto glass substrates at room temperature with the number of repetition N=50. The thickness of Fe sublayer was fixed at 3.0nm while the Si sublayer thickness was varied from 1.0 to 2.0 nm. The topmost layer of all the Fe/Si MLF is Fe. In order to carry out the computer simulations, the information on the MO and optical parameters of the materials that may constitute a real multilayered structure should be known in advance. For this purpose, we also prepared Fe, Si, FeSi2 and FeSi samples. The structural characterization of Fe/Si MLF was performed by low- and high -angle x-ray diffraction with a Cu-K$\alpha$ radiation and by transmission electron microscopy. A bulk $\varepsilon$-FeSi was also investigated. The MO and optical properties were measured at room temperature in the 1.0-4.7 eV energy range. The theoretical simulations of MO and optical properties for the Fe/Si MLF were performed by solving exactly a multireflection problem using the scattering matrix approach assuming various stoichiometries of a nonmagnetic spacer separating the antiferromagnetically coupled Fe layers. The simulated spectra of a model structure of FeSi2 or $\varepsilon$-FeSi as the spacer turned out to fail in explaining the experimental spectra of the Fe/Si MLF in both intensity and shape. Thus, the decisive disagreement between experimental and simulated MO and optical properties ruled out the hypothesis of FeSi2 and $\varepsilon$-FeSi as the nonmagnetic spacer. By supposing the spontaneous formation of a metallic ζ-FeSi, a reasonable agreement between experimental and simulated MO and optical spectra was obtained.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4102-4110
• /
• 2022

Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m². Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 ℃, much below the permissible value of tungsten material (~1200 ℃). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-active-multijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5° toroidally from the 4.6 GHz LH system and is not magnetically connected.