• Journal of Magnetics
• /
• 제16권3호
• /
• pp.318-321
• /
• 2011

A new Fe-based amorphous compound powder was prepared from Fe-Si-B amorphous powder by crushing amorphous ribbons as the first magnetic component and Fe-Cr-Mo metallic glassy powder by water atomization as the second magnetic component. Subsequently by adding organic and inorganic binders to the compound powder and cold pressing, the new Fe-based amorphous compound powder cores were fabricated. This new Fe-based amorphous compound powder cores combine the superior DC-Bias properties and the excellent core loss. The core loss of 500 kW/$m^3$ at $B_m$ = 0.1T and f = 100 kHz was obtained When the mass ratio of FeSiB/FeCrMo equals 3:2, and meanwhile the DC-bias properties of the new Fe-based amorphous compound powder cores just decreased by 10% compared with that of the FeSiB powder cores. In addition, with the increasing of the content of the FeCrMo metallic glassy powder, the core loss tends to decrease.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.915-920
• /
• 2000

합성과 동시에 소결이 이루어지는 HPCS법을 이용하여 TiB$_2$-W 복합체를 텅스텐의 함량 변화에 다라 제조하여 이 복합체의 미세구조 및 기계적 물성에 대하여 연구하였다. 이 연구 결과, 텅스텐의 함량증가에 따라 삼성분 붕화 화합물인 TiWB$_2$의 상이 증가하였으며, 이 상의 증가에 따라 기계적 물성이 향상되었다. 60 MPa의 압력과 130$0^{\circ}C$, 3000 A에서 소결한 TiB$_2$-30vol% W 복합체에서 상대밀도, 강도, 경도 값은 각각 97.2%, 411.5 MPa, 22.36 GPa로 가장 우수한 물성을 얻을 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.511-512
• /
• 2010

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 자성 및 자성재료 국제학술대회
• /
• pp.144-145
• /
• 2011

• 한국결정학회지
• /
• 제12권3호
• /
• pp.141-144
• /
• 2001

Na[Ga(N₃)₄]와 PPh₃의 반응으로부터 이온성 화합물 [Ph₃P(OH)]/sup +/[N₃]/sup -/ (1)이 분리되었다. 화합물1의 구조가 분광학적 방법(¹H-NMR, /sup 13/C{¹H-NMR, IR) 및 X-ray 회절법으로 규명되었다. 화합물1의 결정학 자료 : 사방정계 공간군 P2₁2₁2₁, a = 10.491(4)Å, b=11.603(5)Å, c=13.149(5)Å, Z=4, R(wR₂)=0.0547(0.0978).

• 한국식품과학회지
• /
• 제36권1호
• /
• pp.19-24
• /
• 2004

5% corn oil과 17 mM Brij 700으로 제조한 corn oil-in-water emulsion(O/W)의 droplet의 크기는 첨가되는 phenol의 양이 많아질수록 지방구가 다소 커지는 경향을 보였으며, continuous phase의 surfactant 양은 대조구에 비해 다소 낮아졌다. O/W에 녹차로부터 분리한 phenol류를 100-200 ppm의 농도로 첨가하고 30일간 저장하며 hydroperoxide의 생성량을 측정한 결과 대조구에 비해 낮은 hydroperoxide 함량을 보여 유도기간이 길어지는 것으로 나타났으며, phenol 종류별 hydroperoxide 생성억제 효과는 BHT > procyanidin B3-3-O-gallate>(+)-gallocatechin>(+)-catechin의 순서로 나타났다. 지방 산화의 결과 발생하는 aldehyde의 함량을 측정함으로서 산화정도를 측정하기 위하여 headspace hexanal 양을 측정한 결과, 대조구는 15일까지 hexanal이 검출되지 않았으나 phenol 첨가구는 20-30일로 headspace aldehyde의 불검출기간이 길어졌으며, 농도가 증가할수록 낮은 함량을 나타내었다. Phenol 종류별 headspacealdehyde 생성 억제 효과는 BHT > procyanidin B3-3-O-gallate > (+)-gallocatechin >(+)-catechin의 순서로 나타났다.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.249-254
• /
• 2014

Due to their unique properties, tungsten borides are good candidates for the industrial applications where certain features such as high hardness, chemical inertness, resistance to high temperatures, thermal shock and corrosion. In this study, conditions were investigated for producing tungsten boride powder from tungsten oxide($WO_3$) by self-propagating high-temperature synthesis (SHS) followed by HCl leaching techniques. In the first stage of the study, the exothermicity of the $WO_3$-Mg reaction was investigated by computer simulation. Based on the simulation experimental study was conducted and the SHS products consisting of borides and other compounds were obtained starting with different initial molar ratios of $WO_3$, Mg and $B_2O_3$. It was found that $WO_3$, Mg and $B_2O_3$ reaction system produced high combustion temperature and radical reaction so that diffusion between W and B was not properly occurred. Addition of NaCl and replacement of $B_2O_3$ with B successfully solved the diffusion problem. From the optimum condition tungsten boride($W_2B$ and WB) powders which has 0.1~0.9 um particle size were synthesized.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.136-144
• /
• 1999

The study on the wear characteristics of compound layers formed during gaseous nitrocarburising in the medium carbon boron steels and the plain carbon steel has been carried out by using a pin-on-disc type wear test machine under the oil lubricating condition at room temperature and by varying applied loads, sliding speeds and wear distances. Values of friction coefficient measured at the sliding speed of 0.4m/sec under the oil lubricating condition have been shown to decrease considerably with increasing applied load and become gradually a constant value as load is increased to a higher value, showing that the transition load for friction coefficient appears at an applied load of 247.2N. The length and volume wear rates of compound layer have been revealed to relatively constantly increase, also showing that the wear life per unit thickness of compound layer turns out to be superior as porous layer has a denser and thinner appearance. As the sliding speed increases during wear test performed by varying sliding speed at a load of 63.2N under the oil lubricating condition for medium carbon boron steel nitrocarburised in gas atmosphere, the wear rate has been found to increase, the friction coefficient to decrease and the wear life per unit thickness of compound layer to decrease considerably.

• 한국결정학회지
• /
• 제12권1호
• /
• pp.10-13
• /
• 2001

Compound PdCl₂(PhCN)₂(1) reacted with tert-butylamine(t-BuNH₂) to give trans-[PdCl₂(t-BuNH₂)₂] (2) Compound 2 was characterized by spectroscopy (¹H-NMR, /sup 13/C{¹H}-NMR, and IR) and X-ray diffraction. Crystallographic data for f2: monoclinic space group p2₁/c, a=6.298(1)Å, b=20.740(2)Å, c=10.731(1)Å, β=92.58(1)°, Z=4, R(wR₂)=0.0207(0.0543).

• 한국자기학회지
• /
• 제3권4호
• /
• pp.284-288
• /
• 1993

급속냉각기술로 제조된 $Sm_{2}Co_{3}B_{7}$ 화합물의 저온자기특성(77~450 K 범위)과 결정구조를 연구하여 경자성 재료로서의 응용가능성을 조사하였다. P6/mmm 공간격자의 $Sm_{2}Co_{3}B_{7}$은 150~160 K에서 spin-reorientation 현상을 보였으며, 결정자기이방성 자계(Ha)는 300 k 에서 135 kOe, 77 K 에서 725 kOe의 거대 이방화 에너지를 보였다. 그러나 자기능률(magnetic moment)은 25 emu/g에 그쳤다. Rietveld 분석에 의하여 $Sm_{2}Co_{3}B_{7}$의 결정구조를 밝혔으며 B(4h) 원자는 지금까지 보고된 바와는 달리 Sm(2e) 면에 위치한 것이 아니고 Sm(2e) 면에서 $0.792\;{\AA}$ 떨어져 Sm(2e)면과 Co($6i_{1}$) 면 사이에 위치함을 알았다.