• 한국식품영양과학회지
• /
• 제45권5호
• /
• pp.778-781
• /
• 2016

본 연구에서는 폐기되는 성게 껍질을 이용한 생분해성 필름소재를 개발하고자 gelatin을 첨가한 복합필름 및 항산화, 항균성을 부여하기 위해 아까시 꽃 추출물(RFE)을 첨가한 필름을 제조하였다. 그 결과 gelatin 비율이 증가함에 따라 성게 껍질 필름의 인장강도가 증가하였고 신장률이 감소하였으며, 성게 껍질과 gelatin을 8:2 비율로 첨가하였을 때 최적의 물성을 보였다. 또한, 필름에 RFE를 첨가함에 따라 인장강도는 감소하였으나 신장률과 필름 투습도는 증가하였다. RFE 함유 성게 껍질 필름의 ABTS, DPPH 라디칼 소거능 측정과 디스크 확산법을 이용하여 항산화 및 항균 능력을 측정하였는데, RFE 농도가 증가함에 따라 항산화, 항균 능력이 향상하였다. 따라서 본 연구 결과, RFE를 첨가한 생분해 성게 껍질 필름은 적절한 물성과 함께 항산화, 항균 능력이 있기에 가공식품의 저장성을 증대시킬 수 있는 기능성 포장 소재로의 활용이 가능하다고 판단된다.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.209-219
• /
• 2007

Designing a complex system such as an LCD developing system becomes inefficient when many designers are involved and create their own parts even though they can be used repeatedly in other sections. Thus, this paper proposes a new design process that can maximize the number of common parts in complex system design by organizing the 3D design process. The proposed design process consists of 5 stages: analysis of design intention, definition of initial product structure, definition of skeleton model, sharing design intention with all assembles, control of correlation between components. The proposed design process can maximize common parts in design process, which results in shorter lead time, less production cost, and greater economic benefits.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.158-164
• /
• 2004

W-Cu composite has been used for the applications requiring both high strength, good thermal and electrical conductivity. A graded combination of W and Cu will reduce thermal stress concerned with heat conduction, maintaining good thermal conductivity and high mechanical strength. In the present work, an attempt was made to fabricate continuous W-Cu FGM by preparing the graded porous structure of W skeleton using spark plasma sintering (SPS) process followed by infiltrating Cu. The graded porous structure was prepared at 150$0^{\circ}C$ for 60s under pressure of 15MPa by SPS process using a graphite mold with varying crr)ss section in the longitudinal direction. Infiltration of Cu was performed at 115$0^{\circ}C$ for 1 hour under $H_2$. W-Cu composite with graded Cu composition of 14 to 27 wt％ was finally prepared. In this process the gradient of composition could be conveniently controlled by varying the gradient of cross sectional area of graphite mold, temperature and pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.197-198
• /
• 2008

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.79-80
• /
• 2006

From a viewpoint of heat stress at high temperatures and contact thermal resistance, it is confirmed that the optimal structure is the skeleton structure using Cu substrate on the cooling side, which has excellent heat conductivity and the optimal installation method is to adopt a carbon sheet and a mica sheet to the high temperature side, where Si grease is applied to the low temperature side, under pressurized condition. The power of the developed modules indicated 0.5W in an $FeSi_2$ module and 3.8 W with a SiGe module at 823K, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1643-1645
• /
• 2000

The effects of pre-sintering and infiltration conditions on the electrical and physical properties of Cu-Cr contact material have been studied. Specimens were prepared by infiltration technique, aiming at the final composition of Cu50w%Cr, with varying pre-sintering and infiltration conditions. It showed that increased pre-sintering temperature had a little influence on the final microstructure of Cu-Cr contact material, but improved the surface morphology of Cr-skeleton resulting in better wettability in the followed infiltration process. It also showed that Cr grain growth and gram shape change became prominent with increasing infiltration temperature and time.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.35-41
• /
• 2004

Poly(ethylene terephthalate), polyimide(Kapton), and polypropylene surfaces were modified with argon low temperature plasma by RF glow discharge at 240m Torr, 40W to investigate the surface morphological changes due to the plasma treatment using atomic force microscopy(AFM). Analysis of the AFM images and Ra(average roughness) revealed that the plasma treatment resulted in significant ablation on the surfaces. The morphological changes and surface roughness, however, were different depending on material characteristics such as heat stability, presence of amorphous region, swelling phenomenon, and molecular structure of repeating unit. It was assumed that polypropylene due to its tertiary hydrogen was ablated easily compared to poly(ethylene terephthalate), and that polyimide was more resistant to the ablation than PET due to rigid skeleton of imide and stable phenyl ring structure.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.569-575
• /
• 2018

The stability of shallow cavities with an arbitrary profile is a difficult issue in geotechnical engineering. This paper investigates this problem on the basis of the upper bound theorem of limit analysis and the Hoek-Brown failure criterion. The influence of pore pressure is taken into consideration by regarding it as an external force acting on rock skeleton. An objective function is constructed by equating the internal energy dissipation to the external force work. Then the Lagrange variation approach is used to solve this function. The validity of the proposed method is demonstrated by comparing the analytical solutions with the published research. The relations between shallow and deep cavity are revealed as well. The detaching curve of cavity roof with elliptical profile is obtained. In order to facilitate the application of engineering practice, the numerical results are tabulated, which play an important role in tunnel design and stability analysis of roof. The influential factors on potential collapse are taken into consideration. From the results, the impact of various factors on the extent of detaching is seen intuitively.

• 한국지반환경공학회 논문집
• /
• 제11권5호
• /
• pp.35-43
• /
• 2010

불포화 투수계수는 모관흡수력(또는 함수비)과 간극률의 함수로 정의되어야 한다. 그러나 기존 상용프로그램이나 문헌에 개발된 모델들은 모관흡수력 만의 함수로써 정의 되어왔다. 사면의 안정성은 수리학적인 측면과 흙의 전단강도 특성들이 모두 고려되어야 한다. 이 두 가지 특성에 대한 해석은 상용 프로그램인 Seep/W, Sigma/W 그리고 Slope/W(Geo-Slope, 2007) 같은 상호 연계가능한 해석 프로그램을 이용한다. 이런 해석 방법으로 강우시 불포화 침투수를 고려하고 흙의 변형을 예측하며 결국에는 사면의 안정성 평가에 예측하고 있다. 불포화 침투수를 해석하는 Seep/W 프로그램은 흙의 변형은 고려하지 못하고 단지 불포화 침투해석만을 수행한다. 그래서 흙의 변형을 고려하기 위해 Sigma/W 프로그램을 연계하여 실제 사면에서 발생하는 침투에 의한 흙의 변형을 모사하고 있다. 이와 같이 동시에 발생하는 침투와 흙의 변형을 구현하기 위해 여러 연구자들이 새로운 모델들을 개발하고 있지만, 현재로서는 각각의 해석을 연계하여 실제로 일어나는 현상에 접근하고 있는 실정이다. 본 연구는 기존 프로그램을 이용하여 연계해석에 의한 결과와 동시해석과 유사한 알고리즘을 이용하여 해석한 결과를 비교하여 동시해석의 타당성을 검증하고자 하였다.

• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.93-112
• /
• 2017

Metaheuristic algorithms in general make use of uniform random numbers in their search for optimum designs. Levy Flight (LF) is a random walk consisting of a series of consecutive random steps. The use of LF instead of uniform random numbers improves the performance of metaheuristic algorithms. In this study, three discrete optimum design algorithms are developed for steel skeletal structures each of which is based on one of the recent metaheuristic algorithms. These are biogeography-based optimization (BBO), brain storm optimization (BSO), and artificial bee colony optimization (ABC) algorithms. The optimum design problem of steel skeletal structures is formulated considering LRFD-AISC code provisions and W-sections for frames members and pipe sections for truss members are selected from available section lists. The minimum weight of steel structures is taken as the objective function. The number of steel skeletal structures is designed by using the algorithms developed and effect of LF is investigated. It is noticed that use of LF results in up to 14% lighter optimum structures.