• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.543-550
• /
• 2005

In the present work, modulus of rupture (MOR), flexural toughness properties $(I_{30}\;and\;W_{2.0})$ and workability (slump) of high performance hybrid fiber reinforced concrete (HPHFRC) mixed with micro-fiber (carbon fiber) and macro-fiber (steel fiber), and replaced with a fine mineral admixture such as silica fume (SF) are characterized through the analysis of variance (ANOVA). Data of MOR, $I_{30}(or W_{2.0})$ and slump are used as the characteristic values to estimate flexural performance and workable property of HPHFRC. Specially, an experimental design was Planned according to the fractional orthogoanl nay method to reduce experimental number of times. The experimental results show that steel fiber is a considerable significant factor in MOR and I30 $(W_{2.0})$. Based on the significance of experimental factors about each characteristic factors, the following evaluation can be used: Experiment factors which reduce slump most remarkably are carbon fiber, steel fiber, silica fume order.; Those that improve MOR most significantly are silica fume $({\fallingdotseq}\;carbon\;fiber)$, steel fiber order; Those that increase flexural toughness most distinctly are silica fume, carbon fiber, steel fiber order. It is obtained that the combination of steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $5.0\%$ is the experimental condition that improve MOR and flexural toughness excellently with workability ensured within the experiment.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.207-213
• /
• 1990

Thirty formulations of oxyfluorfen(2-chloro-2,2,2-trifluoro-p-toyl 3-ethoxy-4-nitrophenyl ether were manufactured by adsorption and substitation. Of them 16 formulations n-ere selected because they showed rekatuvely high activity and long durability in the bioassay with (Brassica campestris V.L.) Then, the formulations selected and 4 commercial formulations were tested using Monochoria in pots. As the result, the formulations of polyer 11, elvan 7/40, coal-slag 7/40, zeolite(A), and bentonite(A) were selected because they showed almost complete inhibition of Monochoria even up the 73 days after treatment.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.419-425
• /
• 1989

Various 1-methyl-1,2,4-triazinium iodides were easily synthesized by the reaction of various 1,2,4-triazines and methyl iodide in acetone. When methyl iodide salts of 1,2,4-triazine derivatives were treated with $K_3Fd(CN)_6$ in 10% NaOH solution, 1-methyl-1,2,4-triazole derivatives as the main products were obtained by ring contraction. In addition to 1-methyl-1,2,4-triazole derivatives, 1,6-dihydro-6-oxo-1,2,4-triazine derivatives as the minor products were also obtained when there were no substitutents in $C_6$-position of 1,2,4-triazines. The formation of pseudo base by $OH^-$ and then oxidation to either 1,6-dihydro-6-oxo-1,2,4-triazines or 1-methyl-1,2,4-triazoles were suggested as the mechanism of the ring contraction. This mechanism also verified that the position of quaternization was neither $N_2$ nor $N_4$ but 1-nitrogen of 1,2,4-triazine.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.429-435
• /
• 2003

Vinyl addition copolymerizations of norbornene (NB) and 5-vinyl-2-norbomene (VNB) were carried out using a cationic η$^3$-allyl palladium catalyst in the various mole ratio of comonomers. The copolymers could be obtained in good yield (65∼85%) with high weight-average molecular weights (M$_{w}$ > 760,000). Depending on increasing VNB contents, the molecular weight and yield of the copolymers decreased. FT-IR analysis confirmed that actual contents of VNB in polymer were proportional to the feeding content of VNB. From $^1$H-NMR spectroscopy, we found that both exo and endo VNB isomer were copolymerized with NB. Thermal stabilities of NB-VNB copolymers were independent on the VNB content and their initial decomposition temperatures were about 300 C. The NB-VNB copolymers were followed by epoxidation by using m-CPBA and hydroxylation by 9-BBN, respectively, and these post-polymers were characterized by FT-IR spectroscopy and $^1$H-NMR analysis..

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.846-849
• /
• 2003

Doping effect of various ions in Bi-layered ferroelectric $SrBi_2$$Nb_2$$O_{9}$ (SBN) ceramics was studied. Undoped SBN ceramic and SBN ceramics doped with $Ba^{2＋}$, $Pb^{2＋}$,$ Ca^{2＋}$ , $Bi^{3＋}$ , $La^{3＋}$ , $Ti^{4＋}$ , $Mo^{6＋}$ , and $W^{6＋}$ ions were made by a solid state reaction. Dielectric constants were measured with temperature. Ferroelectric transition temperature decreased with $Pb^{2＋}$ , $Ba^{2＋}$ , $La^{3＋}$ doping, but the transition temperature increased with $Ca^{2＋}$ , $Bi^{3＋}$ , $Ti^{4＋}$, $Mo^{6＋}$ , or$ W^{6＋}$ ionic doping. These results show that the ion size plays an important role in the ferroelectricity of SBN ceramic.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.16-22
• /
• 1998

Recently, the new technology for the recycling of waste plastics as an alternative he1 of blast furnace ha been developed. In this shldy, the test of plastics injection into a tuyere af the foundry blast furnace were carried out. The injection rate of plastics far this tcst facility war expressed as follows, ${W}_{s}=0.265\frac{{delta}PA}{U}_{g}$, where. Ws, AP, A and Ug are plastic conveying ratc (kgisec), pressure drop between feed hopper and blaqt pressure (alm), cross sectional area of conveying pipe (mi) and superficial velocity of transport air (mhzc) respcctiuely. From the results of semi-continuous test operation during 96 hours, the replacement raho mned out to be 1.38 according to the injection rate of 6. 4 kg-plasticsit-p. With increasing the rate of plaslics injcchon, the content of hydrogen in top gas became increased and the brick temperahlre at bzlly was also increased due to Lhe changes ot the combustion zone shape.

• Composites Research
• /
• v.30 no.6
• /
• pp.350-355
• /
• 2017

The new liquid crystalline (LC) epoxy was designed by substituting the phenylcyclohexyl (PCH) mesogen moiety with an alkyl chain at the 2,5 position of the diglycidyl terephthalate. The mesomorphic properties were evaluated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). All LC epoxy derivatives exhibited an enantiotropic smectic phase upon heating and cooling process. The LC phase temperature range was widened by mixing the eutectic mixture of LC epoxies. Interestingly, the cured LC epoxy exhibited the highest thermal conductivity of $0.4W{\cdot}m^{-1}{\cdot}K^{-1}$. The novel LC epoxy with high thermal conductivity might be used as a composite material for electronic and display devices.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.36-41
• /
• 2003

In order to increase the production and secretion rate of mouse salivary $\alpha$-amylase from Saccharomyces cerevisiae, various experiments were attempted. A plasmid pCNNinv (AMY) was constructed by the substitution of ADCl promoter and native signal sequence of mouse salivary $\alpha$-amylase cDNA gene with PRBI promoter and yeast invertase leader sequence, which resulted in 25% increase in the production of $\alpha$-amylase in the culture medium. The respiratory deficient transformant carrying pCNNinv (AMY) were obtained by treating yeast cells with ethidium bromide, and the $\alpha$-amylase activities in the culture brothes of the respiratory-deficient transformants were 5-8 times higher than that of parental wild type strain. $\alpha$-Amylase activity was also increased 3 times when the 0.015% (w/v) of 2-mercaptoethanol was added to the culture medium.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.443-448
• /
• 2004

We realized the national standard of the candela, one of the SI units, by using two photometers with the spectral responsivity measured in reference to the absolute cryogenic radiometer. The external apertures of the photometers were fabricated using a diamond turning machine, and measured in terms of area with uncertainty of 0.05 %(k = 1). The candela is realized using a 1 kW FEL lamp and the characterized photometers on an optical bench. The uncertainty is budgeted to be 0.25 %(k = 1) considering the uncertainty of the spectral responsivity and the response uniformity of the detectors, the area of the external apertures, the color temperature of the lamp, and the positioning reproducibility of the photometers and the lamp. We verified the realized scale by comparing with the scale of National Institute of Standards and Technology, USA. They coincided with each other within 0.1%.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.513-517
• /
• 2000

As a precursor of tetrathiafulvalene (TTF) derivative, 5,6-dimethyl-1,3-dithiolo[4,5-b][1,4]dithiin-2-thione (compound 3) was synthesized by the unusual Lawesson's reaction. Depending upon the substituents such as dimethyl and diphenyl groups, two different products containing 1,4-dithiin and thiophene moieties, respectively, were obtained and characterized by $^{13}C$ NMR and high-resolution electron impact (HREI) mass spectroscopy. The formation of 3 was further characterized by X-ray structure analysis. Crystallographic data for 3: triclinic, space group P1, a=4.145(2)$\AA$, b=10.600(2)$\AA$, c=12.279(2)$\AA$, $\alpha$=71.440(10)$^{\circ}$, $\beta$=84.30(2)$^{\circ}$, $\gamma$=87.31(2)$^{\circ}$, Z=2 and R(wR$_2$)=0.0559(0.1416). The formation mechanism of two products was suggested and compared each other.