• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.195-201
• /
• 2017

In this study, H13 tool steel sculptures are built by a metal 3D printing process at various laser scan speeds. The properties of commercial H13 tool steel powders are confirmed for the metal 3D printing process used: powder bed fusion (PBF), which is a selective laser melting (SLM) process. Commercial H13 powder has an excellent flowability of 16.68 s/50 g with a Hausner ratio of 1.25 and a density of $7.68g/cm^3$. The sculptures are built with dimensions of $10{\times}10{\times}10mm^3$ in size using commercial H13 tool steel powder. The density measured by the Archimedes method is $7.64g/cm^3$, similar to the powder density of $7.68g/cm^3$. The hardness is measured by Rockwell hardness equipment 5 times to obtain a mean value of 54.28 HRC. The optimum process conditions in order to build the sculptures are a laser power of 90 W, a layer thickness of $25{\mu}m$, an overlap of 30%, and a laser scan speed of 200 mm/s.

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.75-86
• /
• 2002

Adequate forage amounts in ruminant animal are necessary for proper ruminal function in dairy cow. This study was carried out to determine the effect of total mixed fermentation feeds made by different green forage crops and grain processings on chemical compositions, RFV (relative feed value) and ruminal characteristics in sheep. The experiment was arranged in a split plot design with 4 replications. The main plot consisted of 6 kinds of green forages (corn, grass, rye, rape, alfalfa and oat) and the sub plots three different grain processings such as non-milling, half milling (7mm mesh over), and regular milling (7mm mesh below). And the different TMFFs (total mixed fermentation feeds) were analyzed for chemical composition and fed to 8 ruminally fistulated sheep for ruminal charactics and palatability. RFV, daily feed intake, acetate/propionate ratio of the rape-TMFFs were higher compared with the other treatment. Ruminal content of VFA (volatile fatty acid) of corn-TMFF was highest as 90.19 mmol% and pH of the feed was lowest as 3.82. But, acetic acid, propionic acid and butyric acid were no difference among treatments. In conclusion, the effect of grain proceeding was not appeared but if consider of only RFV, palatability and dry matter disappearance, grade of TMFF was improved in order of rape-, corn-, alfalfa-, grass-, oat- and rye-TMFF.

• Applied Biological Chemistry
• /
• v.40 no.4
• /
• pp.283-288
• /
• 1997

The antioxidant activities of Korean Red Ginseng Extract(RGE) and ${\alpha}-tocopherol$, as reference compound, were tested with HPLC and fluorometry which measure the MDA after reacting an aqueous 1% linoleic acid buffer solution, and LDL(1 mg protein/ml) buffer solution with $H_2O_2{\;}and{\;}FeCl_2$. The generation of conjugated-diene in LDL(0.25 mg protein/ml) was also measured by spectrometry. MDA determination showed the antioxidant effect on linoleic acid oxidation with oxidation inhibition ratio of 71.8% and 76.1%, respectively, by addition of 1000 ppm RGE and 100 ppm ${\alpha}-tocopherol$. LDL(1 mg protein/ml) oxidation was inhibited by 25.2% and 21.2%, respectively, by addition of 200 ppm REG and 100 ppm ${\alpha}-tocopherol$. The generation of conjugated diene in LDL(0.25 mg protein/ml) was also inhibited by 44.2%, by addition of 50 ppm RGE.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.463-470
• /
• 1995

An experiment was conducted to evaluate the effects of chromium picolinate on growth performance, nutrient utilizability, carcass composition, serum traits and in vitro protein synthesis of 3 day old Arbor Acres broiler chickens when dietary crude protein levels were varying in diets. Six replicates of eight chicks each (average initial weitht = 59.4 g) were randomly assigned to three levels (low, medium, high) of dietary crude protein at two levels of chromium (0, 200 ppb Cr/kg diet) as chromium picolinate. Six chicks/treatment were randomly chosen for analyses of carcass composition, six additional chicks/treatment were randomly chosen for analyses of serum components, and a chick/treatment was chosen for in vitro culture of liver tissue. Chromium picolinate did not affect feed intake, protein and fat utilizability, regradless of dietary crude protein level. But feed/gain ratio were more improved in groups fed the low protein diets added with chromium picolinate compared with groups fed the medium and high protein diets with chromium picolinate. Carcass fat tended to decrease whereas carcass protein tended to increase when added with chromium picolinate. Broilers fed diets with chromium picolinate exhibited lower serum triglyceride and nonesterified fatty acid concentrations than those fed without chromium picolinate (p < 0.05). Both secreted and retained proteins in cultured acinar cell were higher in groups fed diets with chromium picolinate than those fed diets without chromium picolinate (p < 0.05). It could be suggested that chromium picolinate was effective in improving weight gain and nutrient utilizability when dietary crude protein was low (p < 0.05), and also effective in manipulating carcass fat when dietary crude protein level was high (p < 0.05).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.63-72
• /
• 2012

The high-flowing concrete requires additionally or excessively more expensive admixture than conventional concrete. So, the concrete has not to be widely used in practical field due to the increase of production price, need of additional facilities, and excessive development of concrete strength in associate with addition of too much cementitious material even though it has more significant advantages than conventional concrete. Thus, this study aims at developing high-flowing concrete with general strength unlike high strength which has been carried out in conventional study. To observe the role of aggregate in the concrete quantitatively and to increase the performance of high-flowing concrete effectively, parametric studies were carried out such as W/C, s/a, fineness modulus of aggregate, contribution degree of particle sizes, and the effect of 13mm aggregate and fine stone powder as a partial replacement of aggregates. And the effect of these factors on performance of the concrete was evaluated by measuring slump-flow and gap of penetration height in U-typed instrument. As a result, it was found that flowability of high-flowing concrete depends upon grading of fine aggregate more significantly than that of coarse aggregate and is enhanced greatly as fineness modulus of fine aggregate decreases and the value of s/a increases. In addition, the application of 13mm aggregate and fine stone powder are expected as a partial replacement of aggregate in order to increase the performance of high-flowing concrete more effectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1784-1789
• /
• 2006

Two experiments were conducted to determine the effect of phytobiotics and organic acids on growth performance of nursery pigs as an alternative to antibiotics. Phytobiotics refer bioactive compounds from plant materials including essential oils and herbal extracts. In Exp. 1,144 pigs, weaned at 23.4${\pm}$0.3 d age, were allotted to three dietary treatments. Treatment diets were: 1) NC (no antibiotics and no phytobiotics); 2) PC (NC+carbadox, 50 mg/kg); and 3) PB (NC+phytobiotics; 0.1% PEP1000-$1^{(R)}$. Each treatment had six replicates with eight pigs per pen. Pigs were fed the experimental diets for 5 wks in 3 phases (phase 1 for 2 wk; phase 2 for 2 wk; phase 3 for 1 wk). In Exp. 2, 192 pigs, weaned at 19.2${\pm}$0.3 d age, were allotted to three dietary treatments: 1) NC; 2) PC; and 3) PBO (NC+phytobiotics; 0.2% or 0.1% PEP1000-$1^{(R)}$ and organic acids; 0.4% or 0.2% $Biotronic^{(R)}$for the phase 1 and 2, respectively) with eight replicates per treatment and eight pigs per pen. Pigs were fed the assigned diets for 5 wks in 2 phases (phase 1 for 2 wk; phase 2 for 3 wk). Body weights were measured at the beginning of the experiment and at the end of each week in both Exp. 1 and 2. Feed intake was measured at the end of each week in both Exp. 1 and 2. Diarrhea score was measured daily during the entire period for Exp. 1 and during the phase 1 for Exp. 2. In Exp. 1, the PC had a higher (p<0.05) overall ADG than the NC, but the overall ADG of the PB did not differ (p>0.05) from the NC or the PC. In Exp. 2, the overall ADG did not differ (p>0.05) among all the treatments during the entire experimental period. The overall ADFI and the overall gain:feed ratio did not differ (p>0.05) among all the treatments during the entire experimental period in both Exp. 1 and 2. The PC had a higher (p<0.05) overall diarrhea score (harder stools) than the NC and the PB in Exp. 1, and a higher (p<0.05) overall diarrhea score than the NC in Exp. 2. The overall diarrhea score of the PB and the PBO did not differ (p>0.05) from the NC or the PC in Exp. 1 and 2. Results from this study show that the growth of pigs fed the diets with phytobiotics or the combination of phytobiotics and organic acids did not differ from those both with antibiotics and without antibiotics when tested in an environmentally controlled research facility. Further experiments are required to study the growth performance in disease challenged conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2014

The present study concerns the leachability of alkali ions from hardened cement paste in terms of an increase in the pH together with the rate of alkali leaching. To evaluate the influence of mix design on the leaching capacity and rate of alkali, different water-cement ratios (W/C) and binders were used to manufacture paste specimens. The cement paste was made in the form of rectangular bucket where deionised water was subsequently supplied as solvent media. Then the specimen was wrapped in polythene film to avoid contact to atmospheric conditions, which may affect the water chemistry in the bucket. The pH of media was monitored until no further change in the pH value was observed, of which value then used to calculate the leaching capacity and rate. The influence of binder on the pH of solvent is more dominant than that of water to cement ratio: OPC paste produced the highest level of alkali leaching, whilst 30% PFA and 60% GGBS pastes imposed lower level of alkali leaching. After the monitoring of the pH, the inner bucket was ground with an increment of 1.0 mm to measure the leaching influence using the suspension consisting of paste powder and deionised water. It was found that the impact zone for OPC was about 7-8 mm, whilst 30% PFA and 60% GGBS had deeper impact depth of the alkali leaching.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.496-503
• /
• 1996

Aromatic and aliphatic copolyesters for the dispersing agent were synthesized by two stage reaction, esterification and polycondensation. Copolyesters were blended with PET in the melt state and their thermal and rheological properties were investigated. From GPC analysis Mn's and Mw's of copolyesters were about 30000 and 65000g/mol, respectively. From DSC experiment copolyesters had melting range of $90{\sim}150^{\circ}C$. Copolymer composition was in good agreement with comonomer feed ratio from $^1H$-NMR analysis. Copolyesters and SPA (standard sample) were blended with PET in the melt state. From DSC experiment, copolyesters and SPA were miscible with PET. From the dynamic melt viscosity experiment, melt viscosity of blended sample was increased as the content of aromatic copolyester was increased, while it was decreased as the content of aliphatic and SPA were increased. As for volume resistivity of dry color containing carbon black and copolyesters with dispersing time, aromatic copolyester showed highest value. It was conferred from this result that aromatic copolyester was the best dispersing agent for carbon black in PET resin.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.