• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.173-183
• /
• 2012

Recently, experimental studies to prevent explosive spalling based on spalling mechanism and addition of Polypropylene fiber in high strength concrete (HSC) are performed actively. However, with respect to ultra high strength concrete (UHSC), its compact internal structure is more difficult release vapor pressure at rapid rising temperature compared to HSC. Therefore, in this study, an experiment was conducted to evaluate spalling properties of UHSC using ${\Box}$ $100mm{\times}100{\times}H200mm$ rectangular specimen according to ISO-834 standard fire curve. With respect melting point of fiber, three fiber types of Polyethylene, Polypropylene, and Nylon fibers with melting temperature of $110^{\circ}C$, $165^{\circ}C$, and $225^{\circ}C$, respectively, were considered. Mixed fiber of 0.15% and 0.25% of concrete volume was used to consider spalling properties based on water vapor pressure release. Then, TGDTA test on fiber and FEM analysis were performed. The results showed that it is difficult to prevent initial spalling without loss of fiber mass even if fiber melting temperature is low. Also, in preventing thermal spalling, fiber that melts to rapidly create porosity within 10 minutes of fire is more effective than that of low melting temperature property of fiber.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2783-2790
• /
• 2010

In this paper, we first review LDPC codes in general and a belief propagation algorithm that works in logarithm domain. LDPC codes, which is chosen 802.11n for wireless local access network(WLAN) standard, require a large number of computation due to large size of coded block and iteration. Therefore, we presented three kinds of low computational algorithms for LDPC codes. First, sequential decoding with partial group is proposed. It has the same H/W complexity, and fewer number of iterations are required with the same performance in comparison with conventional decoder algorithm. Secondly, we have apply early stop algorithm. This method reduces number of unnecessary iterations. Third, early detection method for reducing the computational complexity is proposed. Using a confidence criterion, some bit nodes and check node edges are detected early on during decoding. Through the simulation, we knew that the iteration number are reduced by half using subset algorithm and early stop algorithm is reduced more than one iteration and computational complexity of early detected method is about 30% offs in case of check node update, 94% offs in case of check node update compared to conventional scheme. The LDPC decoder have been implemented in Xilinx System Generator and targeted to a Xilinx Virtx5-xc5vlx155t FPGA. When three algorithms are used, amount of device is about 45% off and the decoding speed is about two times faster than convectional scheme.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.15-21
• /
• 1993

This paper describes the design and development of a KrF excimer laser stepper and discusses the detailed system parameters and characterization data obtained from the performance test. We have developed a deep UV step-and-repeat system, operating at 248 nm, by retrofitting a commercial modules such as KrF excimer laser, precision wafer stage and fused silica illumination and 5X projection optics of numerical aperture 0.42. What we have developed, to the basic structure, are wafer alignment optics, reticle alignment system, autofocusing/leveling mechanisms and environment chamber. Finally, all these subsystem were integrated under the control of microprocessor-based controllers and computer. The wafer alignment system comprises the OFF-AXIS and the TTL alignment. The OFF-AXIS alignment system was realized with two kinds of optics. One is the magnification system with the image processing technique and the other is He-Ne laser diffraction type system using the alignment grating on the wafer. 'The TTL alignment system employs a dual beam inteferometric method, which takes advantages of higher diffraction efficiency compared with other TTL type alignment systems. As the results, alignment accuracy for OFF-AXIS and TTL alignment system were obtained within 0.1 $\mu\textrm{m}$/ 3 $\sigma$ for the various substrate on the wafers. The wafer focusing and leveling system is modified version of the conventional systems using position sensitive detectors (PSD). This type of detection method showed focusing and leveling accuracies of about $\pm$ 0.1 $\mu\textrm{m}$ and $\pm$ 0.5 arcsec, respectively. From the CD measurement, we obtained 0.4 $\mu\textrm{m}$ resolution features over the full field with routine use, and 0.3 $\mu\textrm{m}$ resolution was attainable under more strict conditions.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.103-110
• /
• 2010

In this paper, a new mode changeable asymmetric full bridge dc/dc converter is proposed to solve the freewheeling current problem of the conventional zero voltage switching(ZVS) phase shift full bridge(PSFB) dc/dc converter of low output voltage and high output current applications. The proposed converter is operated as an asymmetric full bridge converter when the duty cycle is less than 50% and active clamp full bridge converter when the duty cycle is greater than 50%. As a result, since its freewheeling current is eliminated, the conduction loss is lower than that of the conventional ZVS PSFB dc/dc converter. Moreover, ZVS of all power switches can be ensured along a wide load ranges and output current ripple is very small. Therefore, high efficiency of the proposed converter can be achieved. Especially since its operation mode is changed to the active clamp full bridge converter during hold up time and can be operated with 50~100% duty ratio, it can produce the stable output voltage along wide input voltage range. The operational principles, theoretical analysis and design considerations are presented. To confirm the operation, validity and features of the proposed converter, experimental results from a 1.2kW($400V_{dc}/12V_{dc}$) prototype are presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.280-280
• /
• 2007

$Pb(Zr,Ti)O_3$ (PZT) 강유전체 박막은 높은 잔류 분극 (remanent polarization) 특성 때문에 현재 강유전체 메모리 (FeRAM) 소자에 적용하기 위하여 가장 활발히 연구되고 있다. 그런데 PZT 물질은 피로 (fatigue) 및 임프린트 (imprint) 등의 장시간 신뢰성 (long-term reliability) 특성이 취약한 단점을 가지고 있다. 이러한 신뢰성 문제를 해결할 수 있는 효과적인 방법 중의 하나는 $IrO_2$, $SrRuO_3$(SRO) 등의 산화물 전극을 사용하는 것이다. 많은 산화물 전극 중에서 SRO는 PZT와 비슷한 pseudo-perovskite 결정구조를 갖고 격자 상수도 비슷하여, PZT 커패시터의 강유전 특성 및 신뢰성을 향상시키는데 매우 효과적인 것으로 알려져 있다. 따라서 본 연구는 PZT 커패시터에 적용하기 위하여 SRO 박막을 증착하고 이의 전기적 특성 및 미세구조를 분석하고자 하였다. 또 실제로 SRO 박막을 상부전극과 PZT 사이의 버퍼 층 (buffer layer)으로 적용한 경우의 커패시터 특성도 평가하였다. 먼저 다결정 SRO 박막을 $SiO_2$/Si 기판 위에 DC 마그네트론 스퍼터링 법 (DC magnetron sputtering method)으로 증착하였다. 그 다음 이러한 SRO 박막의 미세구조, 결정성 및 전기적 특성이 증착 조건들의 변화에 따라서 어떤 경향성을 보이는지를 평가하였다. 기판 온도는 $350\;{\sim}\;650^{\circ}C$ 범위에서 변화시켰고, 증착 파워는 500 ~ 800 W 범위에서 변화시켰다. 또 Ar+$O_2$ 혼합 가스에서 산소의 혼합 비율을 20 ~ 50% 범위에서 변화시켰다. 이러한 실험 결과 SRO 박막의 전기적 특성 및 미세 구조는 기판의 증착 온도에 따라서 가장 민감하게 변함을 관찰할 수 있었다. 다른 증착 조건과 무관하게 $450^{\circ}C$ 이상의 온도에서 증착된 SRO 박막은 모두 주상정 구조 (columnar structure)를 형성하며 (110) 방향성을 강하게 나타내었다. 가장 낮은 전기 저항은 $550^{\circ}C$ 증착 온도에서 얻을 수 있었는데, 그 값은 약 $440\;{\mu}{\Omega}{\cdot}cm$ 이었다. SRO 버퍼 충을 적용하여 제작한 PZT 커패시터의 잔류 분극 (Pr) 값은 약 $30\;{\mu}C/cm^2$ 정도로 매우 높은 값을 나타내었고, 피로 손실 (fatigue loss)도 $1{\times}10^{11}$ 스위칭 사이클 후에 약 11% 정도로 매우 양호한 값을 나타내었다.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2005

This study was carried out to measure the environmental related parameters from two types of swine houses. Indoor temperature, relative humidity, carbon dioxide level, ammonia concentration and emission were measures every 2 minutes from each house with portable monitoring units. Carbon dioxide concentration balance was used to estimate the ventilation rates of the different houses. Daily ammonia concentrations in the growing-finishing and farrowing houses ranged from 2 to 17 ppm and 6 to 15 ppm respectively. The daily ammonia emission rate from the manure averaged 4.37 g/h$\cdot$500 kg from growing-finishing house and 4.82 g/h$\cdot$500 kg from the farrowing house. The above findings proved that summer season was associated with higher ammonia emission rates due to higher ventilation rate and ambient air temperature.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.109-110
• /
• 2019

자본주의 사회에서 기업은 이윤의 극대화라는 목표를 이루기 위해, 인간을 하나의 자원으로 간주하여 도구화 하는 경향이 있다. 그 결과 인간소외(alienation) 및 부의 양극화 현상이 심각한 사회적 문제로 거론되고 있다. 오늘날 경제성장에 따른 물질적 풍요와 번영이 인류사회에 행복을 가져다 줄 것이라는 통념은 '물질적 풍요 속의 정신적 빈곤'이라는 문제제기에 의해 그 위상이 흔들리고 있다. 자본주의가 인류사회의 행복과 공동번영에 기여하는 경제체제로서 역할을 다하려면, 자본주의 역시 시대의 변화에 맞추어 진화해야 한다. 본 논문에서는 새 시대에 걸 맞는 자본주의의 대안을 논의하고자, 저자 이재윤이 창시한 깨달음경영학(MOSEE;Management Of allSelves' Enlightenment and Empowerment)의 새로운 과학적 학문연구를 통해 새로운 실현성 영역을 추구하는 동시에, 깨달음경영의 새로운 5차원 요소인 의식(영성) 자원 및 자산(SRA:Spirit Resource and Asset)과 본질적으로 무(無)에서 유(有)를 창조하는 진성 창조경영(MOC:Management Of Creation)의 연구 및 인간의식 성장 방법론에 대하여 발표 하고자 한다. 이로써 현대의 주요한 여러 경영철학들 예컨대 CSV(마이클 포터) SI(개리 함멜) 복잡계 철학 美德경영 등의 내재된 구조적 제약들을 분석 평가하고 한계를 극복하는 방안들을 제시함으로써 21세기 우주 인류 신문명 창달을 위한 5차원의 깨달음경영 혁명을 성취 하고자 한다. 즉 2040년 전에 지구 인류의 고도 영성 초 과학기술 문명을 넘어서 우주 인류의 초 영성 초 과학기술 문명 창달을 선도하는 학문연구 교육 인류 사회활동을 지속적으로 해갈 것이다. 위와 같이 21세기 우주 인류의 영원한 평화 자유 지속적 번영을 이루고자 한다. 본 연구는 통섭 고찰 제2회로 미국의 마이클 포토와 막 클램머의 공유가치(CSV)와 영국의 게리 함멜과 프라할라드의 전략적 의도와 브라이언 아서의 복잡계 경영경제 이론을 통섭을 고찰한다.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.523-530
• /
• 2002

Repeatabilities and Correlations among Average Daily Gain, Backfat Thickness and Lean Percent in Swine The repeatability, correlation and rank correlation coefficients among average daily gain, backfat thickness and lean percent were estimated on the basis of records tested from August 1999 to February 2000 with 695 pigs of Duroc, Landrace and Yorkshire boars and gilts tested at 2nd Korea Swine Test Station located in Ha-dong, Kyeongnam Province. The effect of the sex, breed and month of measured were estimated by the least square method. The repeatabilities were estimated from the component of variance among repeated measurements of the trait for the same animal. The results obtained are summarized as follow ; 1. The means of the major economic traits studied were 142.1 days, 173.7 days and 182.5 days for age at 1st, 2nd and 3rd measure, 57.9%, 56.2% and 55.2% for lean percent at 1st, 2nd and 3rd measure, 1.33cm, 1.61cm and 1.63cm for backfat thickness at 1st, 2nd and 3rd measure, 946.6g, 879.2g and 879.4g for average daily gain at 1st, 2nd and 3rd measure, respectively. 2. The correlation coefficients between the backfat thicknesses measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.424, 0.700 and 1.424, respectively. The correlation coefficients between the lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.493, 0.619 and 0.471, respectively. The correlation coefficients between the average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.716, 0.861 and 0.601, respectively. 3. The rank correlation coefficients between backfat thickness measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.438, 0.693 and 0.441, respectively. The rank correlation coefficients between lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.508, 0.593 and 0.478, respectively. The rank correlation coefficients between average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.704, 0.834 and 0.571, respectively. 4. The estimated repeatabilities of the traits studied were 0.428 for the lean percent, 0.374 for the backfat thickness and 0.673 for the average daily gain, respectively.

• Korean Journal of Organic Agriculture
• /
• v.13 no.4
• /
• pp.401-412
• /
• 2005

This study was conducted to examine the effects of dietary Mogchotan(the mixture of charcoal and pyroligneous acid, 80:20, w/w) supplementation on fattening performance, fatty acid composition and the physico-chemical characteristics of meat in pigs. The present study was also stressed to investigate the possibility of industrial utilization of charcoal and pyroligneous acid as a livestock feed additive. Weight gain and feed conversion in pigs fed the Mogchotan supplemented diet were higher than those of the control group. In fatty acids composition, palmitic acid(C16:0) contents of Mogchotan treatment groups were lower than that of control group. However, Mogchotan supplementation increased C16:1, C18:0, C18:1, C18:2 and C18:3 contents when compared with control group pigs. Also, Mogchotan supplementation groups decreased saturated fatty acids level than control group. On the other hand, Mogchotan supplementation showed higher unsaturated fatty acids value, especially polyunsaturated fatty acids value compared to control group. The carcass pH of pigs fed the Mogchotan tended to be higher than control, but was not significantly different. The water holding capacity was significantly higher in pigs fed the 3.0% Mogchotan-supplemented diet than those of other treatment groups(p<0.05). Altogether, it has been suggested that dietary $1{\sim}3%$ of Mogchotan supplementation improved the fattening performance and meat quality in pigs.