• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.796-801
• /
• 2008

$LaGaO_3$ thin film was prepared on Ni-Fe metal porous substrate by Pulsed Laser Deposition method. By the thermal reduction, the dense $NiO-{Fe_3}{O_4}$ substrate is changed to a porous Ni-Fe metal substrate. The volumetric shrinkage and porosity of the substrate are controlled by the reduction temperature. It was found that a thermal expansion property of the Ni-Fe porous metal substrate is almost the same with that of $LaGaO_3$ based oxide. $LaGaO_3$ based electrolyte films are prepared by the pulsed laser deposition (PLD) method. The film composition is sensitively affected by the deposition temperature. The obtained film is amorphous state after deposition. After post annealing at 1073K in air, the single phase of $LaGaO_3$ perovskite was obtained. Since the thermal expansion coefficient of the film is almost the same with that of LSGM film, the obtained metal support LSGM film cell shows the high tolerance against a thermal shock and after 6 min startup from room temperature, the cell shows the almost theoretical open circuit potential.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.170-175
• /
• 2005

Generally, Aluminum is superior to durability, light, and characteristics of the material are embossed luminant. So, these characteristics of aluminum will be used automobile interior parts by aluminum injection moulding. Especially, The external of Aluminum plate is engraved differing pattern by roller working. This working can use any longer and be seen gracefully. This is the reason why aluminum insert moulding is used. This feature of research can be characterized by simple process to customize aluminum sheet of blanking and forming process with internal parts of configuration if products are injected by aluminum sheet. Besides, to analysis completed Automobile interior parts to be concerned volumetric shrinkage, best gate location, fill time analysis and so on through the mold-flow before the aluminum insert moulding is worked.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1026-1029
• /
• 2006

Particulate reinforced titanium composites were produced by PM rout. Differents volumetric percentages of TiN reinforcements were used, 5,10,15 vol%. Samples were uniaxial pressed and vacuum sintered at differents temperatures between $1200-1300^{\circ}C$. Density, porosity, shrinkage, mechanical properties and microstructure were studied. Elastic properties and strength resistance were analysed by flexural strength and tension tests, and after the test, fractured samples were analysed too, obtaining a correlation between the fracture, interparticulated or intraparticulated, and the reinforcement addition.. Hardness and microhardness test were applied too, in order to complete the study about mechanical properties. In order to study wear resistance pin-on-disc test were used. In addition, the temperature influence, the reactivity between matrix and reinforcement, and the microstructures developed were observed by optical and electron microscopy.

• Geomechanics and Engineering
• /
• 제22권3호
• /
• pp.227-236
• /
• 2020

Expansive soils are renowned for their swelling-shrinkage property and these volumetric changes resultantly cause huge damage to civil infrastructures. Likewise, subgrades consisting of expansive soils instigate serviceability failures in pavements across various regions of Pakistan and worldwide. This study presents the use of polypropylene fibers to improve the engineering properties of a local swelling soil. The moisture-density relationship, unconfined compressive strength (UCS) and elastic modulus (E₅₀), California bearing ratio (CBR) and one-dimensional consolidation behavior of the soil treated with 0, 0.2, 0.4, 0.6 and 0.8% fibers have been investigated in this study. It is found that the maximum dry density of reinforced soil slightly decreased by 2.8% due to replacement of heavier soil particles by light-weight fibers and the optimum moisture content remained almost unaffected due to non-absorbent nature of the fibers. A significant improvement has been observed in UCS (an increase of 279%), E₅₀ (an increase of 113.6%) and CBR value (an increase of 94.4% under unsoaked and an increase of 55.6% under soaked conditions) of the soil reinforced with 0.4% fibers, thereby providing a better quality subgrade for the construction of pavements on such soils. Free swell and swell pressure of the soil also significantly reduced (94.4% and 87.9%, respectively) with the addition of 0.8% fibers and eventually converting the medium swelling soil to a low swelling class. Similarly, the compression and rebound indices also reduced by 69.9% and 88%, respectively with fiber inclusion of 0.8%. From the experimental evaluations, it emerges that polypropylene fiber has great potential as a low cost and sustainable stabilizing material for widespread swelling soils.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.68-75
• /
• 2017

본 연구에서는 프리스트레스트 콘크리트용 고품질 그라우트를 개발하기 위한 기초 자료로 활용하기 위해 그라우트의 화학 혼화제로 고성능 감수제와 증점제의 양과 사용방법이 유동성, 블리딩률, 체적변화 및 압축강도에 미치는 영향에 대해 검토하였다. 증점제와 고성능 감수제가 유동성에 미치는 영향에 대해 검토한 결과, 증점제와 고성능 감수제를 조합사용한 경우에는 고성능 감수제의 사용량이 너무 적으면 응집현상이 발생하여 유동성이 저하되나, 고성능 감수제 사용량 0.1% 이상부터 유동성이 크게 향상되는 것으로 나타났다. 증점제의 사용량이 증가할수록 블리딩률이 감소하며, 고성능 감수제는 0.05%까지 블리딩률이 증가하나, 0.1%부터 블리딩률이 감소하는 것으로 나타났다. 또한 고성능 감수제와 증점제를 각각 0.15%를 조합한 그라우트의 배합이 유하시간, 플로우, 블리딩 및 체적변화 측면에서 가장 양호한 것으로 분석되었다.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.111-128
• /
• 1998

미합중국 텍사스 주 휴스턴시 소재의 휴스턴 대학 내에 위치한 미합중국 국립 지반 실험지 (National Geotechnical Experimentation Site at the University of Houston)의 팽창성 점토에 설치된 직경 305mm 1개의 일반 현장타설 말뚝과 3개의 분리형 현장타설 말뚝의 18개월간의 거동에 관한 실험적 연구를 수행하였다. 지반의 흡수력 변화에 따른 지반 팽창량 예측을 위해 실험 말뚝 주위의 지반에 깊이별로 지반 흡수력 감지 장치를 설치하여 관측한 결과, 지반은 최대 35mm까지 팽창하였고 일반 현장타설 말뚝은 4-5mm, 분리형 현장타설 말뚝은 1-2mm의 수직 변위가 관측되었다. 또한 지반 흡수력, 전압력과 체적 변형률 간의 관계식을 얻기 위해 3축 압축 실험 장치를 변형한 실내 실험을 수행하였으며, 이 결과를 이용하여 최대 지반 팽창량 예측 모델을 만들어 현장 실측치와 비교 검토하였다.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.40-45
• /
• 2008

There exist many types of pipe and component fatigue through vibrations, thermal fatigues or shifting. In some cases of thermal stratification/thermal fatigue, pipes & components are receiving thermal stress by means of material expansion and shrinkage by continuous thermal repetitive variation. Small cracks initially occur on the inside surface by thermal stress. These cracks grow in depth the pipe wall and finally come to a rupture. Pipe parts of susceptibility to thermal stratification and thermal fatigue are now being examined by conventional UT(ultrasonic test) as volumetric examination. It is difficult to fully satisfy the code & standards requirements because 3" weldolet weldments of RCS 16" pipe to 3" branch connection lines have complex structural shape. To solve the problems of conventional UT examination, we made a realistic mock-up and UT calibration block. We performed a simulation of phased array UT utilizing CIVA as NDE(Non-Destructive Examination) simulation software. Also we designed phased array UT transducer and wedge, optimal frequency by using simulation data. We performed phased array UT experiment through mock-up including artificial flaws(notch). The phased array UT technique is finally developed to improve the reliability of ultrasonic test at RCS 16" pipe to 3" branch connection weld.

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.117-123
• /
• 2016

글라스울(Glass Wool)은 건설 현장 및 여러 다양한 분야에서 단열재로 사용되고 있다. 글라스울의 경우 불연재료이며 화재시 유해한 가스를 발생시키지 않으므로, 단열재로서의 사용이 더욱 권고되고 있는 상황이다. 그러나 글라스울이 반복적인 습윤 건조의 싸이클에 노출되면, 공극의 감소및 수축이 발생하여 단열성능을 잃게 되므로, 주기적인 교체가 필요하다. 본 연구에서는 이러한 폐글라스울을 콘크리트용 첨가재료로 활용하여 역학적 성능을 개선하고자 하는 시도를 하였다. 실험 결과에 따르면 폐글라스울은 약한 포졸란 반응성을 가지며, 압축강도 및 휨강도의 증가 효과를 가짐을 알 수 있었으며, 이를 위한 최적의 폐글라스울 혼입량은 콘크리트 체적의 0.5%에 해당되는 것으로 나타났다.

• Journal of Forest and Environmental Science
• /
• 제39권1호
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• 한국지반공학회논문집
• /
• 제39권5호
• /
• pp.13-26
• /
• 2023

불포화토의 함수특성곡선은 산사태 평가와 토석류 분석에 매우 중요한 요소이다. 본 연구에서는 현장에 적합한 모관흡수력을 통해 산사태 취약성을 분석하기 위하여 함수특성곡선과 체적변형을 고려한 수축시험을 수행하였다. 실험에 사용된 시료는 국내에 분포하는 세립분이 다량함유된 SM계열 화강 풍화토이며, 산사태 해석 시 사용된 강수량의 경우 실측된 데이터를 사용하였다. 실내실험 시 측정된 함수특성곡선은 건조과정에서 발생 된 곡선이며, 체적변형 확인할 수 있는 수축시험을 통하여 습윤과정에서 발생되는 곡선을 재 산정하여 산사태 취약성 분석을 하였다. 본 연구결과 습윤곡선의 안전율이 건조곡선의 안전율보다 낮게 나타남을 알 수 있었으며 그 결과 현장 사면지반의 체적변형을 고려한 모관흡수력 산정이 필요함을 확인 하였다.