• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.75-80
• /
• 1999

As current manufacturing processes require high spindle speed and precise machining, increasing accuracy by reducing volumetric errors of the machine itself, particularly thermal errors, is very important. Thermal errors can be estimated by many empirical models, for example, an FEM model, a neural network model, a linear regression model, an engineering judgment model etc. This paper discusses to make a modeling of thermal errors efficiently through backward elimination and fuzzy logic strategy. The model of a thermal error using fuzzy logic strategy overcome limitation of accuracy in the linear regression model or the engineering judgment model. And this model is compared with the engineering judgment model. It is not necessary complex process such like multi-regression analysis of the engineering judgment model. A fuzzy model does not need to know the characteristics of the plant, and the parameters of the model can be mathematically calculated. Like a regression model, this model can be applied to any machine, but it delivers greater accuracy and robustness.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2589-2596
• /
• 2000

As current manufacturing processes require high spindle speed and precise machining, increasing accuracy by reducing volumetric errors of the machine itself, particularly thermal errors, is very important. Thermal errors can be estimated by many empirical models, for example, an FEM model, a neural network model, a linear regression model, an engineering judgment model, etc. This paper discusses to make a modeling of thermal errors efficiently through backward elimination and fuzzy logic strategy. The model of a thermal error using fuzzy logic strategy overcomes limitation of accuracy in the linear regression model or the engineering judgment model. It shows that the fuzzy model has more better performance than linear regression model, though it has less number of thermal variables than the other. The fuzzy model does not need to have complex procedure such like multi-regression and to know the characteristics of the plant, and the parameters of the model can be mathematically calculated. Also, the fuzzy model can be applied to any machine, but it delivers greater accuracy and robustness.

• KCI Concrete Journal
• /
• 제13권1호
• /
• pp.69-78
• /
• 2001

The inelastic behavior of a reinforced concrete columns is influenced by a number of factors : 1) level of axial load, 2) tie spacing, 3) volumetric ratio of lateral steel, 4) concrete strength, 5) distribution of longitudinal steel, 6) strength of lateral steel, 7) cover thickness, 8) configuration of lateral steel, 9) strain gradient, 10) strain rate, 11) the effectively confined concrete core area, and 12) amount of longitudinal steel. A new constitutive model of a confined concrete is suggested in order to investigate the nonlinear behavior of the reinforced concrete columns under concentric loading. The developed constitutive model for the confined concrete takes into account the effects of effectively confined area as well as the horizontal and longitudinal distributions of the confining pressures. None of the existing models incorporated these two main effects at the same time. A total of different six constitutive models for the behavior of the confined concrete under concentric compression were compared with the sixty-one test results reported by different researchers. The superiority of the developed model in its accuracy is demonstrated by evaluating the error function, which compares the weighted averages for the sum of squared relative differences in peak compressive strength and corresponding strain, stress at strain equal to 0.015, and total area under stress-strain curve up to strain equal to 0.015.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.201-210
• /
• 1999

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric and thermal errors of the machine tools. Therefore, a key requirement for improving te machining accuracy and product quality is to reduce the geometric and thermal errors of machine tools. This study models geometric error for error analysis and develops on-machine measurement system by which the volumetric erors are measured. The geometric error is modeled using form shaping function(FSF) which is defined as the mathematical relationship between form shaping motion of machine tool and machined surface. The constant terms included in the error model are found from the measurement results of on-machine measurement system. The developed on-machine measurement system consists of the spherical ball artifact (SBA), the touch probe unit with a star type stylus, the thermal data logger and the personal computer. Experiments, performed with the developed measurement system, show that the system provides a high measuring accuracy, with repeatability of ${\pm}2{\mu}m$ in X, Y and Z directions.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.65-68
• /
• 2001

This study was conducted to develop a soil moisture meter using capacitance probe. A parallel cylinder type capacitance probe (C-probe) was fabricated The 5 MHz of crystal oscillator was constructed to detect the capacitance change of the C-probe with moist soil. A third order polynomial regression model for volumetric water content having oscillation frequency changes at 5 MHz as independent variables presented the determination coefficient of 0.979 and root mean square error of $0.031\;cm^{3}cm^{3}$ for all soil samples. A prototype soil moisture meter consisting of the sample container, C-probe, oscillator, frequency counter and related signal procession units presented the correlation coefficient of 0.987 and the root mean square error of $0.032\;cm^{3}cm^{3}$ as compared with the oven drying method for unknown soil samples.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.195-204
• /
• 2004

기존의 다축응력 상태의 콘크리트 크리프 실험으로부터 제안된 푸아송비에 대한 연구결과는 서로 큰 차이를 나타내고 있다. 측정된 변형률로부터 계산된 푸아송비는 작은 실험 오차에 의해서도 매우 민감하며, 이러한 민감성은 푸아송비의 시간에 따른 변화와 응력상태에 따른 경향을 파악하는 데 있어 큰 어려움을 초래한다. 따라서 이러한 연구결과의 불일치를 해결하고 신뢰성 있는 결과를 도출하기 위해서 새로운 분석방법이 요구된다. 이 연구는 다축응력 상태의 크리프 실험결과에 대한 새로운 분석방법으로 미세평면 모델을 적용하였다. 미세평면 상에서 체적과 편차컴플라이언스에 대한 수학적 모델로는 이중지수 법칙을 사용하였다. 체적과 편차성분의 컴플라이언스는 여섯 개의 변수로 구성되며 실험결과를 최적으로 모사하는 변수를 최적화 기법으로부터 구하였다. 여섯 변수에 대한 회귀분석결과로 부터 계산된 푸아송비는 시간에 따라 변화하였다. 또한 시간에 따라 푸아송비가 일정하다는 조건에서 네 변수를 결정하였으며 이 때의 회귀분석결과와 실험 측정값 사이의 오차는 여섯 변수가 사용된 회귀분석결과의 오차에 비해 다소 크게 나타났다. 네 변수에 대한 회귀분석결과로부터 얻은 시간에 따라 일정한 푸아송비는 큰 오차 없이 실제의 구조해석에 유용하게 사용될 수 있을 것으로 판단된다.

• 방송공학회논문지
• /
• 제24권5호
• /
• pp.765-774
• /
• 2019

본 논문에서는 다중 RGB-D 카메라의 포인트 클라우드 정합 알고리즘을 제안한다. 일반적으로 컴퓨터 비전 분야에서는 카메라의 위치를 정밀하게 추정하는 문제에 많은 관심을 두고 있다. 기존의 3D 모델 생성 방식들은 많은 카메라 대수나 고가의 3D Camera를 필요로 한다. 또한 2차원 이미지를 통해 카메라 외부 파라미터를 얻는 기존의 방식은 큰 오차를 가지고 있다. 본 논문에서는 저가의 RGB-D 카메라 8대를 사용하여 전방위 3차원 모델을 생성하기 위해 깊이 이미지와 함수 최적화 방식을 이용하여 유효한 범위 내의 오차를 갖는 좌표 변환 파라미터를 구하는 방식을 제안한다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.937-945
• /
• 2000

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this study, the machined freeform surface is modeled by interpolating the data measured on the machine tool into the mathematical continuous surface, and then the surface model is improved with the parameterization to minimize surface fairness. The accuracy reliability of the measured data is confirmed through compensation of volumetric errors of the machine tool and of probing errors. Non-uniform B-spline surface interpolation method is adopted to guarantee the continuity of surface model. Surface fairness is evaluated with the consideration of normal curvature on the interpolated surface. The validity and usefulness of the proposed method is examined through computer simulation and experiment on the machine tool.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.361-374
• /
• 2022

On the premise of ensuring that the automatic and quantitative discharging function of concrete conveyors is met, the accuracy of the weight forecast by the mathematical model of the screw conveying volume is improved, and the error of the weight of the concrete parts and the accumulation thickness is reduced. In this paper, the discrete element method (DEM) is used to simulate the macroscopic flow of concrete. Using the concrete discrete element model, the size of the screw conveyor is set, and establish the response model between the influencing factors (process and structure) and the concrete mass flow rate according to the design points of the screw discharging experiment. The nonlinear data fitting method is used to obtain the volumetric efficiency function under the influence of process and structural factors, and the traditional screw conveying volume model is improved. The mass flow rate of concrete predicted by the improved mathematical model of screw conveying volume is consistent with the test results. The model can accurately describe the conveying process of concrete and achieve the purpose of improving the accuracy of forecasting the weight of discharged concrete.

• 한국지반공학회지:지반
• /
• 제8권2호
• /
• pp.81-96
• /
• 1992

본 문은 Lade의 단일항복면 구성모델(single work-hardening model)을 선정하여 사질토의 거동해석에 필요한 토질매개변수를 실내시험을 하여 구하는 과정에서 필연적으로 발생하는 실험오차가 해석결과에 미치는 영향을 분석하였다. 연구방법으로서는 백마강 모래에 대하여 등방압축-팽창시험과 구속압력을 달리한 일련의 배수삼축시험을 하고 이 시험자료를 이용하여 회귀분석을 근거로, 본 연구에서 개발된 토질 매개 변수 결정 프로그램에 의해 기찬매개변수를 결정하고 그 평균치에서 표준편차를 증감시켜 축방 향변형률에 대한 축차응력 및 체적변형률의 상계 및 하계 범위를 밝힘으로서 각 토질매개변수의 민감도를 규명하였다. 그 결과 토질매개변수결정 프로그램의 실용성이 크다는 것을 화인하고 Lade의 단일항복면 구성모델의 예측능력이 좋다는 것을 알았다.