• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.101-106
• /
• 2014

The purpose of this research was to figure out the stand structure and growth characteristic with relation to DBH, height, and volume in sixteen Pinus koraiensis plantations of Gangwon province region. Age class was diversely distributed from age class II (16 yr) to age class VIII (77 yr), and, in terms of site index, sixteen regions were superior: nine regions 'high', seven regions 'middle'. The distribution of DBH by sites appeared a bell-shaped curve, and the number of trees was the most in diameter section of 18-22 cm. The dispersion of DBH was various with age and widest ranging from 18 cm to 58 cm in age class VII-VIII. The distribution of height was also a bell-shaped curve with the smaller deviation than the distribution of DBH, and most of trees were in height section of 14-18 m. The correlation of DBH and height was high (r=0.75), and the volume bigger than 1.0 $m^3$ was presented from DBH 35 cm, height 20 m.

• Journal of Distribution Science
• /
• v.16 no.6
• /
• pp.25-35
• /
• 2018

Purpose - Although marketing networks are crucial competitive advantage in terms of firm's new information and resource acquisition ability, their impact on new product development performance remains vague, especially under environmental uncertainty. The principal objective of this research is to provide a better understanding of effects of technological uncertainty and volume uncertainty on first tier supplier's perceived performance of new product development under conditions reflecting varying levels of structural holes. Specifically, this research examines the moderating effect of structural holes on the relationship between environmental uncertainty and new product development performance. Research design, data, and methodology - To test the hypotheses, a questionnaire survey was conducted with a Korean engineering firm's major first-tier suppliers in the context of internal network entities, manufacturer-supplier-subsupplier relationships, and to verify the proposed hypotheses, structural equation modeling was established. Construct measures were based on existing measures and previous research. Results - The survey results indicate that technological uncertainty and volume uncertainty differentially affect NPD performance under conditions of high and low structural holes. Conclusions - This study offer some theoretical and practical implications among distribution channel members, especially, this study suggests that interfirm networks have critical competitive advantage in uncertain environments. The distinctiveness of engineering industry might limit the generalizability of the results. Thus, future research should consider a wider range of industries.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.39-51
• /
• 1999

This study has an object to evaluate runoff characteristics with ILLUDAS model and SWMM owing to each rainfall distribution type of Huff's quartile and each rainfall duration time of 30 ,60, 120 and 180 minutes. As a result of this study, Type-Ⅰ Extreme (TIE) rainfall distribution pattern with Huff's 2nd quartile is adequate for Cheju volcanic island . To decide optimal rain fall duration , time of concentration and critical duration should be compared and analyzed each other. In this study, 30 and 120 miniutes were suggeste to iptiaml duration time of A and B study basins. It is concluded that the magnitude of peak runoff discharge is maximum with Huff's 4th quartile, and that of total runoff volume is maximum with Huff's 4th quartile for ILLUDAS model and with Huff's 1st quartile for SWMM. As rainfall duration time increasing is increasing . Also in case of total runoff volume, volumen by SWMM is less than by ILLUDAS model as to variation ratio of total runoff volume in A and B study basin. Therefore, the resulots of this study canb e sued as basic data in determining adequate rainfoal duration time and rainfall distribution type and used for urban drainage systems analysis and design at small urbanization catchment is Cheju volcanic island.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1650-1660
• /
• 2020

Comparing with the large containment, the gas can not flow freely within the local compartment due to the small volume of the compartment in case of serious accident, which affects the hydrogen flow distribution, and it will determines the location where high concentration occurs in compartment. In this paper, hydrogen distribution and possible hydrogen risk in the vessel under the different conditions are investigated. The results show that when the initial gas momentum is increased, the ability of gas enters into the upper region of the vessel will be strengthened, and the hydrogen volume fraction in the upper region of the vessel is higher. Comparing with horizontal source direction, when source direction is vertically towards upper space, hydrogen is more likely to accumulate in the upper region of the vessel. With the increasing of steam mass flow, the dilution effect of steam on the hydrogen volume fraction will be strengthened, while the pressure in the vessel is also increased. When steam flow is decreased, the hydrogen explosion risk is higher in the vessel. The experiment data can provide technical support for the validation of the CFD software and the mitigation of hydrogen risk in the containment compartment.

• Structural Engineering and Mechanics
• /
• v.52 no.4
• /
• pp.663-686
• /
• 2014

This paper deals with free vibration analysis of bidirectional functionally graded annular plates resting on a two-parameter elastic foundation. The formulations are based on the three-dimensional elasticity theory. This study presents a novel 2-D six-parameter power-law distribution for ceramic volume fraction of 2-D functionally graded materials that gives designers a powerful tool for flexible designing of structures under multi-functional requirements. Various material profiles along the thickness and in the in-plane directions are illustrated by using the 2-D power-law distribution. The effective material properties at a point are determined in terms of the local volume fractions and the material properties by the Mori-Tanaka scheme. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The fast rate of convergence of the method is shown and the results are compared against existing results in literature. Some new results for natural frequencies of the plates are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The interesting results indicate that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional 1-D functionally graded materials.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2009

This study assessed the facility volume distribution for artificial reefs (ARs) deployed at the sea bottom in fishing grounds in the Busan Sea region, and estimated the efficient use of volume in the initial AR group. Analysis of the volume of AR facilities in the Busan Sea region indicated that the quantity and surface areas of deployed facilities varied greatly between 1997 and 2004. However, a rapid decrease in AR facility volume after 2003 indicated an increased use of different kinds of ARs, such as steel or ceramic ARs. And the results revealed that a total of 2,777 AR facilities were deployed in the Gijang sea region with a founding ratio of 89%; corresponding numbers for the Heaundae and Namgu sea region were 7,691 and 84.9%, and 905 and 96% for the cubic type of AR in the Saha and Gangseo sea regions. The analysis indicated that ARs deployed in the Busan sea region maintained a good conservation ratio of more than 85%. The loss in AR volume (approximately 15%) was due to subsidence, breakaway, and incomplete deployment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.260-268
• /
• 2006

The micromechanical approach was used to investigate the interfacial strain distributions of a unidirectional composite under transverse loading in which fibers were usually found to be randomly packed. Representative volume elements (RVE) for the analysis were composed of both regular fiber arrays such as a square array and a hexagonal array, and a random fiber array. The finite element analysis was performed to analyze the normal, tangential and shear strains at the interface. Due to the periodic characteristics of the strain distributions at the interface, the Fourier series approximation with proper coefficients was utilized to evaluate the strain distributions at the interface for the regular and random fiber arrays with respect to fiber volume fractions. From the analysis, it was found that the random arrangement of fibers had a significant influence on the strain distribution at the interface, and the strain distribution in the regular fiber arrays was one of special cases of that in the random fiber array.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.199-209
• /
• 2008

This paper is described the concepts and limitations for the traditional directional design hour volume estimation. The main objective of this paper is to establish an estimation method of probabilistic directional design hour volume in order to improve the limitation for the traditional approach method. To express the traffic congestion of specific road segment, this paper proposed the link travel time as the probability that the road capacity can accommodate a certain traffic demand at desired service level. Also, the link travel time threshold was derived from chance-constrained stochastic model. Such successive probabilistic process could determine optimal ranked design hour volume and directional design hour volume. Therefore, the probabilistic directional design hour volume can consider the traffic congestion and economic aspect in road planning and design stage. It is hoped that this study will provide a better understanding of various issues involved in the short term prediction of directional design hourly volume on different types of roads.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.155-169
• /
• 1994

The minimum temperatures are important element in the daily human life, the climatic classification, and so on. In this study, the authors aim to make an analysis the distribution characteristics of minimum temperatures of 95 weather stations in Korea by using the Climatological Standard Normals of Korea VolumeI, VolumeII, and the Climatological Standard Normals of North Korea. The important results are as follows 1) The daily, fifthly, and tenthly minimum temperatures show the highest rate of occurrance on 14th of January( Occurrance rate : 56.6% ), 16~20th of January( 37.6% ), and the middle ten days of January( 82.1% ) respectively. 2) In the regional distribution of minimum temperatures in winter, the values of northern part, inland area, and west coastal region are lower than those of southern, coastal, and east coastal regions respectively. And, bigger cities and industrial area( Seoul, Incheon, Daejeon, Daegu, etc. ) have larger values than the its vicinities. 3) When the daily minimum temperature is $0^{\circ}C$ and less, the days of northern part, inland area, and wests coastal region are higher than those of southern, coastal, and east coastal regions respectively.