• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.655-664
• /
• 2018

The riverbed material survey is to investigate the particle size distribution, specific gravity, porosity, etc. as basic data necessary for river channel plan such as calculation of sediment transport and change of river bed. In principle, the survey spots are 1 km interval in the longitudinal direction of the river and 3 points or more in the 1 cross section. Therefore, depending on longitudinal length of the river to be investigated, the number of surveyed sites is very large, and the time and cost for the investigation are correspondingly required. This study is to compare the particle size analysis method with the volumetric method and the image analysis method in work efficiency and cost and to examine the applicability of the image analysis method. It was confirmed that the diameter of the equivalent circle converted by the image analysis method can be applied to the analysis of bed material particle size. In the gravel stream with a particle size of less than 10 cm and a large shape factor, the analytical result of the bed material by the image analysis method is accurate. However, when the shape factor decreases as the particle size increases, the error increases. In addition, analysis results of the work efficiency and cost of the volume method and the image analysis method showed a reduction of about 80%.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.126-134
• /
• 2000

The purpose of this study is to examine the status of supply-demand and procurement of the timber used for wooden cultural properties. Because people require the high quality pine timber with cultural assurance and public function for cultural properties, it is priced far higher than ordinary construction timber. The timber consumption was estimated at 18 thousand cubic meter in 1998, of which the large sized log(LSL) with the small end diameter over 30cm consisted of 35.5%, equivalent to 6,300 cubic meter. Majority of the timber was supplied from private forest located in Kangwon-do and national forest, accounting for 65.7% and 16.7%, respectively. Recently the supply more and more relied on timber logged in Kangwon-do. Owing to lack of domestic supply of LSL class timber, part of the volume has been substituted by import log. Most of carpenters working on cultural properties thought that supply of LSL timber would hardly meet the increasing demand for uses of wooden cultural properties. Finally, in order to uphold the tradition of wooden cultural properties, it is necessary to establish a forest management plan which aim at producing large size high quality pine timber.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.69-78
• /
• 2011

The purpose of this research is particle shape evaluation of aggregate using Digital Image Process(DIP). DIP is very useful to measure the roughness and particle shape of aggregates. Couple of aggregates, like standard sand, two different crushed stones, and two different marine aggregates, have been employed. Shape factors of two different marine aggregates are ranged 0.35 to 0.54. Crushed stone I is 0.74 which is highly flat, but standard sand is elongated shape. Especially, two marine aggregate showed a big difference of width and length which meaned a long shape. There is any significant difference of elongation ratio and flatness for each aggregate with different measuring system, like direct measurement of vernier calipers and DIP method. Shape conversion coefficient and equivalent diameter for changing 2D image to 3D image by the Digital Image Process(DIP) have been suggested and modified particle size distribution curve has been showed. The measured flatness ratios of each aggregate were 0.30, 0.36, 0.47 and 0.83, respectively. Also, the conversion shape coefficients of each aggregate were determinded as 0.77, 0.78, 0.84 and 0.92. The size of aggregate has been modified by multiplying the shape conversion coefficient and the aggregate size from DIP. The modified gradation curve with modified volume and weight of aggregate has been suggested. Within the limited test results, DIP is one of useful to get the particle shape of aggregate with limitation of measuring errors and to apply the particle distribution curve.