• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3196-3202
• /
• 2012

Post-synthesis is used to synthesize organic hybrid inorganic mesoporous sieves. In this method, the activity and structure of the base sieve are crucial to obtain the definable hybrid materials. The chemical and physical properties of the base can be largely changed either by the final step of its synthesizing processes, by template removal which is accomplished with the oxidative thermal decomposition (burning) method or by solvent extraction method. In this paper we compared two methods for the post-synthesis of organic hybrid MCM-48. When the template was extracted with HCl/alcohol mixture, the final product showed larger pore size, larger pore volume and better crystallinity compared to the case of the thermal decomposition. The reactivity of the surface silanol group of template free MCM-48 was also checked with an alkylsilylation reagent $CH_2=CHSi(OC_2H_5)_3$. Raman and $^{29}Si$ NMR spectra of MCM-48 in the test reaction indicated that more of the organic group was grafted to the surface of the sample after the template was removed with the solvent extraction method. Direct synthesis of vinyl-MCM-48 was also investigated and its characteristics were compared with the case of post-synthesis. From the results, it was suggested that the structure and chemical reactivity can be maintained in the solvent extraction method and that organic grafting after the solvent extraction can be a good candidate to synthesize a definable hybrid porous material.

• 유기물자원화
• /
• 제12권1호
• /
• pp.104-109
• /
• 2004

본 연구는 공기주입에 의한 고형 폐기물의 빠른 안정화를 달성할 수 있는 매립지의 호기성 공정을 평가하는 것을 목표로 하였다. 실험은 매립지에서 최적의 공기주입방법을 평가하기 위해 선별토사를 충전한 4개의 모의 매립조(혐기성, 1PV(pore volume/day)공기주입, 5PV 공기주입, 10PV 공기주입)를 운영하였다. 선별토사를 충전한 bioreactor를 호기성으로 운전한 경우에 공기를 주입하지 않은 bioreactor에 비해 유기물 분해가 뛰어난 것으로 나타났다. 매립가스의 발생량 및 조성변화와 soil respiration test 결과로부터 5 PV/day으로 공기를 주입한 bioreactor가 유기물 분해율이 가장 높은 것으로 나타났다.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.187-196
• /
• 2017

To ensure hygienic safety of drinking water in a water storage tank, the concentrations of residual chlorine should be above a certain regulation level. In this study, we conducted model simulations to investigate the effects of temperature on residual chlorine in water storage tank conditions typically used in Seoul. For this, values of model parameters (decomposition rate constant, sorption coefficient, and evaporation mass transfer coefficient) were experimentally determined from laboratory experiments. The model simulations under continuous flow conditions showed that the residual chlorine concentrations were satisfied the water quality standard level (0.1 mg/L) at all the temperature conditions ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$). Meanwhile, when the tanks had a no flow condition (i.e., no tap-water influent due to a sudden shut-down), the concentrations became lower than the regulatory level after certain periods. The findings from this modeling works simulating Seoul's water storage tanks suggested disappearance rate of residual chlorine could be reduced through the tanks design optimization with maintenance of low water temperature, minimization of air flow and volume, suppression of dispersion and the use of wall materials with low sorption ability.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.223-233
• /
• 2006

Layered manufacturing(LM) is emerging as a new technology that enables the fabrication of three dimensional heterogeneous objects such as Multi-materials and Functionally Gradient Materials (FGMs). Among various types of heterogeneous objects, more attention has recently paid on the fabrication of FGMs because of their potentials in engineering applications. The necessary steps for LM fabrication of FGMs include representation and process planning of material information inside an FGM. This paper introduces a new process planning algorithm that takes into account the processing of material information. The detailed tasks are discretization (i.e., decomposition-based approximation of volume fraction), orientation (build direction selection), and adaptive slicing of heterogeneous objects. In particular, this paper focuses on the discretization process that converts all of the material information inside an FGM into material features like geometric features. It is thus possible to choose an optimal build direction among various pre-selected ones by approximately estimating build time. This is because total build time depends on the complexity of features. This discretization process also allows adaptive slicing of heterogeneous objects to minimize surface finish and material composition error. In addition, tool path planning can be simplified into fill pattern generation. Specific examples are shown to illustrate the overall procedure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.104-104
• /
• 2010

With the advent of nano-particle fillers in insulating materials, the insulating materials of superior quality have come to fore. In the recent past, nanocomposite LDPE/XLPE (Low Density Polyethylene/Cross Linked Polyethylene) power cable dielectrics have been synthesized. A preliminary evaluation of these new class of materials seem to show that, addition of small amounts of sub-micron inorganic fillers improved the dielectric properties of the composite, in particular, the volume resistivity, and the DC breakdown strength. The thermal behaviour, for example, the stability of composites against decomposition and ensuing electrical failure, do not seem to have been addressed. In a conventional XLPE insulated cable, the average thermal breakdown strength and maximum temperature at the onset of breakdown were seen to be markedly lower than the corresponding intrinsic breakdown strength and decomposition temperature. In this page, analysis of DC Breakdown of nano-composite insulating material for HVDC Cable is introduced.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.169-176
• /
• 1996

Effect of retained austenite on rolling contact fatigue of nitrocarburized high-carbon chromium bearing steel has been investigated to develop surface-hardened bearing steel with imprved resistance to rolling contact fatigue. Fatigue tests were conducted in elesto-hydrodynamic lubricating conditions at a shaft speed of 5,000rpm, under max, hertzian stress of $492kg/mm^2$. Volume fraction of retained austenite in austenitic nitrocarburized STB2 steel was controlled by tempering at various temperature, $200{\sim}250^{\circ}C$. It was observed using TEM that decomposition of retained austenite during tempering at $250^{\circ}C$ was the highest in quantity, resulted in formation of lower bainite. Rolling contact fatigue life of the specimens with lower bainite, formed by decomposition of retained austenite, was improved in comparison with there of specimens with more amount of retained austenite.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.297-305
• /
• 2009

Automatic generation of the mid-surfaces of a CAD model is becoming a useful function in that it can help increase the efficiency of engineering analysis as far as it does not affect the result seriously. Several methods had been proposed previously to automatically generate the mid-surfaces, but they often failed to generate the mid-surfaces of complex CAD models. Due to the inherent difficulty of this mid-surface generation problem, it may not be possible to come up with a complete and general method to solve this problem. Since a method that can handle a specific case may not work for different cases, it seems that developing case-specific methods ends up with solving only a fraction of the problem. In this paper, therefore, we propose a method to generate mid-surfaces based on a divide-and-conquer paradigm. This method first decomposes a complex CAD model into simple volumes. The mid-surfaces of the simple volumes are automatically generated by the existing methods, and then they are converted into the mid-surfaces of the original CAD model.

• 천문학회보
• /
• 제46권1호
• /
• pp.32.3-33
• /
• 2021

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~ 490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into bulk-narrow, bulk-broad, and non_bulk with respect to their velocity and velocity dispersion. We correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The bulk-narrow component that resides within r25 is likely to follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• 분석과학
• /
• 제10권3호
• /
• pp.179-186
• /
• 1997

본 연구는 식물체 중 게르마늄을 분석할 때 기존의 방법보다 분석효율이 높고 간편하여 분해시간이 짧게 걸리는 방법을 찾고자 실험을 수행하였다. 시료 분해시 분해액은 $HNO_3+HClO_4+H_2SO_4$의 혼합산을 10 : 4 : 1(v/v)의 비율로 혼합 사용하였을 때 분해 소요 일수는 4~5일이었고, 회수율은 98% 이상이었다. 분해 후 최종 일정 부피로 맞추어 주기 위한 용액은 0.1M acetic acid-sodium acetate가 좋았으며, 아르곤 연료를 사용한 탄소봉원자화기부착 원자흡광분광광도계의 검출 한계는 0.02ppm이었다. 이와 같은 결과들은 식물체 중 게르마늄 분석에 있어서 전술한 실험 목적에 부합되는 결과였다.

• 공업화학
• /
• 제17권5호
• /
• pp.490-497
• /
• 2006

$V_{2}O_{5}$/$TiO_{2}$계 선택적촉매환원법(SCR) 촉매는 $SO_{2}$가 존재하는 조건에서 $SO_{2}$의 산화 및 암모니아의 반응에 의해 형성된 황산암모늄염으로 인해 촉매는 비활성화될 수 있다. 본 연구에 의하면, $SO_{2}$에 의한 촉매의 비활성화는 $SO_{2}$의 흡착이후 $SO_{3}$로의 산화 정도에 의존한다. $SO_{2}$의 산화는 배가스 내의 산소 농도에 약하게 영향을 받으며 바나듐 함량에 영향을 받는다. 또한 미반응 암모니아 역시 황산암모늄염 형성의 원인이므로 SCR 반응에 있어서 암모니아 투입비율에 대한 영향을 도출하였다. 황산암모늄염에 의해 비활성화된 촉매가 낮은 SCR 활성을 갖는 이유를 촉매의 기공부피 변화에서 찾을 수 있다. 이러한 황산암모늄염의 분해 반응도출을 위해 TPD (Temperature Programmed Decomposition) 실험이 수행되었다.