• 수산해양기술연구
• /
• 제50권2호
• /
• pp.176-184
• /
• 2014

Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate (c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.150-152
• /
• 1994

In this paper, the optimum shape design of stator slot of induction motors for iron loss reduction is proposed. To obtain the flux distribution in induction motors, 2-D finite element method with voltage source is employed. The iron loss is calculated from the iron loss data given by the iron manufacturer. To calculate the sensitivity of iron loss to shape variation, the sensitivity analysis of discrete approach is used. The proposed algorithm is applied to a 3-phase squirrel cage induction motor. The nodes at stator slot boundary of the induction motor are defined as design parameters. By controlling these parameters under the constant volume of iron, we can minimize the iron loss. Furthermore, the stator copper loss is reduced by increasing the slot area. So the stator slot area is determined at the point that the summation of iron loss and copper loss of stator is minimized. Since the constraint of constant volume of iron is nonlinear to the design parameters, the Gradient Projection method is used as an optimization algorithm.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.103-111
• /
• 2012

Works for dam heightening plan have dual purposes: flood disaster prevention by securing additional storage volume and river ecosystem conservation by supplying stream maintenance flow. Now, the dam heightening project is in progress and there are 93 dam heightened reservoir. After the dam heightening project, 2.2 hundred million ton of flood control volume in reservoirs will be secured. Thus it is necessary to evaluate the effects of the dam heightening project on watershed hydrology and stream hydraulics, and resulting flood damages. This study was aimed to assess the impact of outflow from the dam heightened reservoir group on the Whangryong river design flood. The HEC-HMS (Hydrologic Engineering Center-Hydrologic Modeling System) model was used for estimating flood discharge, while HEC-5 (Hydrologic Engineering Center-5) was used for reservoir routing. This study analysed flood reduction effect on 100yr and 200yr return periods about the before and after heightening of agricultural dams. Based on the results of this study, the reduction of flood peak discharge at downstream of the reservoir group was estimated to be about 41% and 53% for 100yr and 200yr frequencies, respectively.

• Journal of Chest Surgery
• /
• 제53권4호
• /
• pp.184-190
• /
• 2020

Radiation therapy (RT) has improved patient outcomes, but treatment-related complication rates remain high. In the conventional 2-dimensional and 3-dimensional conformal RT (3D-CRT) era, there was little room for toxicity reduction because of the need to balance the estimated toxicity to organs at risk (OARs), derived from dose-volume histogram data for organs including the lung, heart, spinal cord, and liver, with the planning target volume (PTV) dose. Intensity-modulated RT (IMRT) is an advanced form of conformal RT that utilizes computer-controlled linear accelerators to deliver precise radiation doses to the PTV. The dosimetric advantages of IMRT enable better sparing of normal tissues and OARs than is possible with 3D-CRT. A major breakthrough in the treatment of esophageal cancer (EC), whether early or locally advanced, is the use of proton beam therapy (PBT). Protons deposit their highest dose of radiation at the tumor, while leaving none behind; the resulting effective dose reduction to healthy tissues and OARs considerably reduces acute and delayed RT-related toxicity. In recent studies, PBT has been found to alleviate severe lymphopenia resulting from combined chemo-radiation, opening up the possibility of reducing immune suppression, which might be associated with a poor prognosis in cases of locally advanced EC.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.183-189
• /
• 2022

This study seeks towards an optimal way to control sulfate ions in semiconductor wastewater effluent with potential eco-toxicity. We developed a system based on ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O). The basic idea is that the pH of the water is raised to approximately 12 with Ca(OH)₂. After, aluminium salt is added, leading to the precipitation of ettringite. Lab-scale batch and continuous experiment results with real semiconductor wastewater demonstrated that 1.5 and 1 of stoichiometric quantities for Ca²⁺ and A³⁺ with pH above 12.7 could be considered as the optimal operation condition with 15% of sludge recycle to the influent. A mixed AlCl₃ + Fe reagent was selected as the beneficial Al³⁺ source in ettringite process, which resulted in 80% of sludge volume reduction and improved sludge dewaterability. The results of continuous experiment showed that with precipitation as ettringite, sulfate concentration can be stably reduced to less than 50 mg/L in effluent from the influent 2,050 ± 175 mg/L on average (1,705 ~ 2,633 mg/L).

• Archives of Plastic Surgery
• /
• 제50권4호
• /
• pp.422-431
• /
• 2023

Background Posttraumatic lymphedema (PTL) is sparsely described in the literature. The aim of this study is to propose a comprehensive approach for prevention and treatment of PTL using lymphovenous anastomosis (LVA) and lymphatic vessels free flap, reporting our experience in the management of early-stage lymphedema. Methods A retrospective observational study was performed between October 2017 and July 2022. Functional assessment with magnetic resonance lymphangiography and indocyanine green lymphography was performed. Patients with lymphedema and functional lymphatic channels were included. Cases with limited soft tissue damage were proposed for LVA, and those with acute or prior soft tissue damage needing skin reconstruction were proposed for superficial circumflex iliac artery perforator lymphatic vessels free flap (SCIP-LV) to treat or prevent lymphedema. Primary and secondary outcomes were limb volume reduction and quality of life (QoL) improvement, respectively. Follow-up was at least 1 year. Results Twenty-eight patients were operated using this approach during the study period. LVA were performed in 12 patients; mean reduction of excess volume (REV) was 58.82% and the improvement in QoL was 49.25%. SCIP-LV was performed in seven patients with no flap failure; mean REV was 58.77% and the improvement QoL was 50.9%. Nine patients with acute injury in lymphatic critical areas were reconstructed with SCIP-LV as a preventive approach and no lymphedema was detected. Conclusion Our comprehensive approach provides an organized way to treat patients with PTL, or at risk of developing it, to have satisfactory results and improve their QoL.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.626-632
• /
• 2010

Purpose: Nasal bone fractures are often classified as minor injury. However, the incidence of posttraumatic nasal deformity remains alarmingly high. It is because of unnoticed septal fracture. This study was conducted to determine the necessity of septoplasty for patients with nasal bone fracture accompanying grade I septal fractures. Methods: Among 105 patients with nasal bone fractures, 52 who had grade I septal fracture were diagnosed based on physical examination and computed tomography. Patients' age ranged from 14 to 65 years (mean 29.25 years), and 35 were male and 17 female. Patients were divided into 2 groups according to surgical treatment methods: patients who underwent closed reduction only (group 1, n=28) and those who underwent simultaneous closed reduction and septoplasty (group 2, n=24). The treatment outcomes were evaluated by comparing changes in nasal airway volume measured by acoustic rhinometry before the surgery, 3 months and 6 months after the surgery according to the timing of surgical repair and surgical treatment methods. Results: Nasal airway volume increased after the surgery by 17.8% in 3 months after the surgery, 25.2% in 6 months in group 1 and by 22.7% in 3 months, 35.8% in 6 months in group 2. The increase in airway volume after the surgery by 26.3% in 3 months after the surgery, 34.2% in 6 months after the surgery in operation within 1 week after trauma and by 12.1% in 3 months, 22.2% in 6 months after the operation later 1 week after trauma. The difference was statistically significant. Three patients in group 1 complained of intermittent nasal obstruction, two of whom showed a decrease in nasal airway volume by acoustic rhinometry. Conclusion: Most patients with nasal bone fractures accompanying grade I septal fractures have been treated with closed reduction in clinical settings. However, the results of this study suggest that septoplasty be performed after a correct diagnosis of septal fracture is made through comprehensive physical examination and computed tomography. Septoplasty is important to obtain more favorable outcomes and reduce complication.

• 한국환경농학회지
• /
• 제18권4호
• /
• pp.321-326
• /
• 1999

도시형 음식물 쓰레기 처리를 위한 감량 퇴비화 장치개발에 대한 연구의 일환으로 폭 3m, 길이 21.36m, 높이 3.95m의 $300m^3$ 규모의 음식물 쓰레기 감량 퇴비화 장치를 이용하여 1단계로 매일 각각 $2m^3,\;3.5m^3$ 씩 49일간 음식물 쓰레기를 투입하여 투입량에 따른 공정의 효용성과 공정중의 성분 변화 및 투입 음식물 쓰레기에 대한 감량율을 조사하였다. 장치내 퇴비단의 온도는 투입량에 관계없이 모두 평균 $60^{\circ}C$ 이상 유지되었으며, 최종 생산퇴비의 수분함량은 각각 43.6%와 47.2였다. 최종 생산 퇴비의 pH는 각각 6.2, 6.6이었고 유기물 함량은 각각 84.3%와 79.6%였다. $K_2O,$ CaO과 NaCl등의 양이온은 투입 기간이 증가할수록 퇴비에 농축되었는데, 특히 최종 생산퇴비중 NaCl은 1단계 4.62%, 2단계 4.92%로 매우 높게 조사되었다. 1단계와 2단계의 최종 생산 퇴비의 Pb, Cu, Cr, Ni, Cd는 각각 37.82㎎/㎏, 56.87㎎/㎏, 9.8㎎/㎏. 22.21㎎/㎏, 3.69㎎/㎏과 44.55㎎/㎏, 95.54㎎/㎏, 12.22㎎/㎏, 24.94㎎/㎏, 3.86㎎/㎏로 조사되었다. 한편 음식물 쓰레기 투입량에 따른 본 장치의 음식물 쓰레기 감량율은 초기에 투입한 Wood chip의 분해율을 고려할 경우 실제적인 음식물 쓰레기 부피기준 감량율은 1단계 78.8%, 2단계 77%로 98일간의 평균 77%의 우수한 감량효율을 나타내어 본 처리장치가 도시형 음식물 쓰레기 퇴비 장치로 이용이 가능함을 알 수 있었다.

• 한국대기환경학회지
• /
• 제13권3호
• /
• pp.207-214
• /
• 1997

We collected airborne complex mixtures in a industrial area of Yeochun, and examined whether these complex mixtures could affect gap junctional intercellular communication (GJIC) in a cultured WBF-344 rat liver epithelial cells (LEC). Since the reduction of GJIC plays an important role in chemical carcinogenesis, measurement of changes of GJIC is a meaningful method to screen carcinogenicity of these mixtures. High and low volume samples were dissolved in dimethyl sulfoxide (DMSO) and tested. Blank filter extractions were also examined for exclud-ing possible toxicity of filter itself, and TPA (12-O-tetradecanoylphorbol-13-acetate) and DMSO were used as positive and negative control, respectively. When the cells were exposed to samples at concentration below that required to maintain rather than 85% cell viability based on the result of neutral red uptake assay, maximal inhibition of GJIC was observed at 1hr after treatment with both high and low volume samples by scrape-loading dye transfer assay. In fluorescence recovery after photobleaching assay, recovery rates via gap junctions were 33%/min in high volume sample and 62%/min in low volume sample. In together, airborne samples collected in Yeochun inhibited GJIC in a cultured WBF-344 rat LEC. These results suggest airborne samples tested in this experiment may attribute to cause a certain type and degree of cancers in in vivo when exposured for some periods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1303-1306
• /
• 2005

The mechanical properties of bellows, such as the extensibility and the strength can be changed depending on the shape. For the shipbuilding material, it is favorable that the fatigue life is long due to the elastic property and the reduction of thermal stress in piping system. Nowadays, the domestic production and design of bellows are based on the E.J.M.A Code. Therefore, the design standard is in need because of much errors and lack of detailed analysis. In this study, it is attempted to find out the optimal shape of U-type bellows using the finite element method. The effective factors, mountain height, length, thickness, and number of mountains and the length of joint are considered and the proper values are chosen for the simulation. The results shows that if the number of mountains are reduced, the volume decreases while the stress increases. However, the number of mountains are increased, the volume increases above the standard volume and the stress obviously increases. In addition, the effect of the thickness of bellows on the stress is very large. Both of the volume and stress are decreasing at a certain lower value region.